phonenumber +49(0)711 123722-0
|
DE EN

Starterkit armStone™A9/r3 Linux

 

Starterkit armStone™A9/r3 Linux
  299,- €
Tax not included

armStoneA9/r3-V1-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software

The armStone™A9/r3 in PicoITX format has standard connectors for 10/ 100/ 1000 Ethernet, 2x USB Host, USB Device, as well as Audio Line Out, DVI, SATA, and on the bottom side mPCIe. A power plug was assembled to supply the board with 5V. The two LVDS display channels are once on a 25pol socket and once both on a JILI30 connector (for dual channel LVDS). The alternative RGB display interface is on a 34-pole ESCDI interface. The resistive touch or capacitive touch controller (I²C) is connected via another 6-pole socket or the ESCDI display adapter. A USB Host interface is located on a 4-pole pin strip. Further interfaces are found on J1, and a 10-pole pin strip was already equipped for COM1.

The armStone™A9/r3 starter kit consists of the armStoneA9/r3-V1-LIN (with 1GB RAM, 128MB Flash, Audio, Ethernet, CAN, PCIe, SATA, and a resistive touch controller on the display adapter). Furthermore, we have equipped the RGB interface (34-pole ESCDI), as well as both LVDS interfaces.

One can connect an RGB display and two LVDS displays simultaneously. A bootloader and a Linux Image are already pre-installed.

The scope of delivery of the starter kit contains an additional cable set, a 7" WVGA TFT with a resistive touch panel, and the fitting display adapter with film cable. On a supplement, you can find the access data to documentation and software.
The starter kit also comes with a finned heat sink on the CPU, please note that these finned heat sinks are not contained in volume deliveries.

Additionally, we offer a 4-hour Workshop. The goal of the workshop is, to learn how to handle the armStone™A9/r3 starter kit and complete it with a running system. Under Linux, you learn how to deal with Buildroot and further Linux tools.

Scope of Delivery

armStoneA9 TOP
aStoneA9/r3-V1-LIN
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V1-LIN

armStone efus  RGB Kit
Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

ADP NT24V2 OBLIQUE TOP
Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3

Software 

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS
500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays and Display Kits

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15
120,- €
 
B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
Request  
B.LCD.18 7" RGB Display with PCAP Touch
7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch
SKU: B.LCD.18
150,- €
 
KIT TFT 7RGB Displaykit 7" RGB - PCAP Touch
7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter.
SKU: KIT-TFT-7RGB
210,- €
 
armStone efus  RGB Kit Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT
170,- €
 

Touch Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C
Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2
35,- €
 

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 
B.MKAB.23 50poles Film Cable
Cable for 7" RGB Endrich Display (B.LCD.18)
FFC cable, A50pol., pitch=0,5mm, l=200mm
SKU: B.MKAB.41
10,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C
80,- €
 
aStone ADP UNI1 OBLIQUE TOP NEU armStone™ Extension
Routes interfaces of the 66pin feature connector to standard connectors.
SKU: aStone-ADP-UNI1
130,- €
 
armStone Adapter DVI armStone™/ efus™/ PicoCore™ DVI Adapter
Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen.
SKU: aStone-ADP-DVI
50,- €
 
aSt-ADP-MIT1 Adapter for Endrich iSi50 Displays
Adapter to connect Endrich iSi50 displays to F&S boards
SKU: aSt-ADP-MIT1
50,- €
 
JTAG Debug Adapter JTAG Debug Adapter
To program Cortex-M4.
SKU: ADP-CMSIS
69,- €
 
ADP NT24V2 OBLIQUE TOP Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3
40,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN
40,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP
500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €