phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoMODA9 Windows/Linux

 

The PicoMODA9 is a plug-in module with only one four-pole connector. The starter kit is an easy solution to connect an external periphery during the phase of development. The base board leads all interfaces of PicoMODA9 out on common connectors, so the periphery only needs to be plugged in and the power to be activated. One can start the development right away now; the operating system including all drivers is already pre-installed on the module. The PicoMODA9 module (with pre-installed OS) is plugged on the base board in PicoITX form factor. A SD-Card Slot is already assembled, a battery holder is provided for RTC supply and standard connectors for Ethernet and USB Host/ USB Device are available. All further interfaces like Audio, CAN, Touch, I2C, SPI etc. can be found on pin rows.

➜ Please create your own starterkit.

The PicoMODA9-KIT (Section 1) is a must. It contains the base board, a cable kit(power plug, USB device cable, Ethernet cable, serial cable) and an USB stick.
Choose from one of the offered PicoMODA9 (Section 2). The modules are available in different versions and with different OS.
The next step is to select one of the offered Display Kits (Section 3) (RGB or LVDS interface, with/ without Touch). The display kit is shipped with all necessary cables/ adapters to connect it to the base board.
An additional option is to order display adapters or LVDS display cables (Section 4).

Scope of Delivery

Please create the starterkit yourself. Please refer to the ➜.pdf and choose from the following options:

Section 1

PicoMOD Startinterface TOP
PicoMOD Base Board
Offers connection options for Ethernet, 4x USB Host, USB Device, 2x RS232, TTL, SD Card, I²C, SPI, Audio (Line In, Line Out, Mic In), resistive Touch and digital RGB (LVDS/DVI).
SKU: PMOD-SINTF7

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

USBSTICK1
USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1

Section 2

PicoMODA9 TOP Windows
PMODA9-V2-WEC7
NXP i.MX 6DualLite Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3,3V Supply, Windows Embedded Compact 7
SKU: PMODA9-V2-WEC7

PicoMODA9 TOP Linux
PMODA9-V2-LIN
NXP i.MX 6DualLite Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3,3V Supply, Linux Buildroot/Yocto
SKU: PMODA9-V2-LIN

PicoMODA9 TOP Windows
PMODA9-V1-WEC7
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, CAN, Audio, Touch, RGB, 0°C - +70°C, 3,3V Supply, Windows Embedded Compact 7
SKU: PMODA9-V1-WEC7

PicoMODA9 TOP Linux
PMODA9-V1-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, CAN, Audio, Touch, RGB, 0°C - +70°C, 3,3V Supply, Linux Buildroot/Yocto
SKU: PMODA9-V1-LIN

Section 3

armStone efus  RGB Kit
Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT

Produkt SINTF-LVDS1 nicht vorhanden

Produkt SINTF-LVDSTOUCH1 nicht vorhanden

Software

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET
500,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE
500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN
500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE
500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S
1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS
500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows
500,- €
 

Displays and Display Kit

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15
120,- €
 
B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
Request  
armStone efus  RGB Kit Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT
170,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cable

B.MKAB.23 40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23
10,- €
 

Adapter

PicoMOD DVI Adapter PicoMOD/ QBliss DVI Adapter
Connects the PicoMODA9 and QBliss modules to a DVI/ HDMI screen.
SKU: SINTF-ADP-DVI
50,- €
 

Further adapters are listed in the ➜.pdf file.

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP
500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €