+49(0)711 123722-0
(0)
Starterkit armStone™A9/r3 Windows
|
|
|
The armStone™A9/r3 in PicoITX format has standard connectors for 10/ 100/ 1000 Ethernet, 2x USB Host, USB Device, as well as Audio Line Out, DVI, SATA, and on the bottom side mPCIe. A power plug was assembled to supply the board with 5V. The two LVDS display channels are once on a 25pol socket and once both on a JILI30 connector (for dual channel LVDS). The alternative RGB display interface is on a 34-pole ESCDI interface. The resistive touch or capacitive touch controller (I²C) is connected via another 6-pole socket or the ESCDI display adapter. A USB Host interface is located on a 4-pole pin strip. Further interfaces are found on J1, and a 10-pole pin strip was already equipped for COM1.
There are two versions of the armStone™A9/r3-SKIT available: Linux or WCE 6.0 R3/ WEC 7. The armStone™A9/r3 starter kit consists of the armStone™A9/r3-V1-WEC7 (with 1GB RAM, 128MB Flash, Audio, Ethernet, CAN, PCIe, SATA, and a resistive touch controller on the display adapter). Furthermore, we have equipped the RGB interface (34-pole ESCDI), as well as both LVDS interfaces.
One can connect an RGB display and two LVDS displays simultaneously. A bootloader and a WEC 7 kernel are already pre-installed. It is also possible to install another available operating system for testing purposes and to develop software for armStoneA9. WCE6.0 and WEC 2013 are available.
The scope of delivery of the starter kit contains an additional cable set, a 7" WVGA TFT with a resistive touch panel, and the fitting display adapter with film cable. On a supplement, you can find the access data to documentation and software.
The starter kit also comes with a finned heat sink on the CPU, please note that these finned heat sinks are not contained in volume deliveries.
Additionally, we offer a 4-hour Workshop. The goal of the workshop is, to learn how to handle the armStone™A9/r3 starter kit and complete it with a running system. Under Windows, Visual Studio .NET is brought closer to you.
Scope of Delivery
aStoneA9/r3-V1-WEC7
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Windows Embedded Compact 7
SKU: aStoneA9/r3-V1-WEC7
Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT
Produkt SINTF-CABKIT nicht vorhanden
Software
 |
Software .NET Drivers Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++. SKU: WCE-DOTNET |
500,- € | ||
|
UpDate Software This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card. SKU: WCE-UPDATE |
500,- € | ||
|
Boot Screen Shows the device's user a starting procedure while booting (BMP File). SKU: WCE-BOOTSCREEN |
500,- € | ||
|
Custom Kernel Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added. SKU: WCE-CUSTIMAGE |
500,- € | ||
|
Failsafe Flash Filesystem (F3S) The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing. SKU: WCE-F3S |
1,000,- € | ||
|
Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows |
500,- € |
Displays and Display Kits
 |
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | ||
 |
7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18 |
150,- € | ||
 |
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € | ||
 |
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € |
Touch Kits
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
 |
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € | ||
Cables
 |
50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41 |
10,- € | ||
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
 |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
 |
armStone™ Extension Routes interfaces of the 66pin feature connector to standard connectors. SKU: aStone-ADP-UNI1 |
130,- € | ||
 |
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € | ||
 |
Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1 |
50,- € | ||
 |
JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS |
69,- € | ||
 |
Power Adapter To supply armStone™ and PicoCore™ modules with 24V. SKU: ADP-NT24V3 |
40,- € | ||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € |
Workshop
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € |
