Starterkit efus™A7UL Windows

efus™A7UL-V4-W13
NXP i.MX 6ULL ARM Cortex-A7, 512MB RAM, 512MB Flash, 4GB eMMC, 2x Ethernet, 2x CAN, Audio, WLAN, BT, Touch, RGB, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013
SKU: efusA7UL-V4-W13

efus™ Base Board
Offers connection options for 2x Ethernet, 3x USB Host, USB Device (OTG), micro SD Card, SD Card, 4x Serial, I²C, SPI, 2x PWM, Audio (Line In, Line Out, Mic), digital/analog Camera, DVI/DisplayPort, mini PCIe and SATA.
SKU: EFUS-SINTF-FERT1B

Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT

Produkt SINTF-CABKIT nicht vorhanden

Patch Antenna
Patch antenna for WLAN/ BT (2.4 GHz) to connect F&S modules with WLAN/ BT antenna socket
SKU: B.ANT.5

Software

	Software .NET Drivers Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++. SKU: WCE-DOTNET	500,- €
	UpDate Software This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card. SKU: WCE-UPDATE	500,- €
	Boot Screen Shows the device's user a starting procedure while booting (BMP File). SKU: WCE-BOOTSCREEN	500,- €
	Custom Kernel Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added. SKU: WCE-CUSTIMAGE	500,- €
	Failsafe Flash Filesystem (F3S) The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing. SKU: WCE-F3S	1,000,- €
	Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows	500,- €

Displays and Display Kit

	7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15	120,- €
	7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18	150,- €
	Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT	170,- €

Touch Kits

	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2	35,- €

Cables

	40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23	10,- €
	50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41	10,- €

Adapters

	I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C	80,- €
	armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI	50,- €
	Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1	50,- €

Plug Connector

MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1

43,- €

Workshop

Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1

Request

Other Accessories

	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5	36,- €
	Patch Antenna Patch antenna for WLAN/ BT (2.4 GHz) to connect F&S modules with WLAN/ BT antenna socket SKU: B.ANT.5	10,- €