Starterkit PicoCOMA5 Windows

The starterkit offers you the possibility to connect an external periphery with PicoCOMA5 during the phase of development. PicoCOMA5 is a plug-in module and has all signals on a 80pol plug connector.
The kit contains a base board which leads out all PicoCOMA5 interfaces on common sockets or pin strips.

The PicoCOMA5 starterkit contains a PicoCOMA5-V2-WCE with Cortex-A5 & Cortex-M4 CPU, 256MB RAM, 256MB Flash, Audio, Ethernet, CAN and resisitive touch controller. Bootloader and a WCE 6.0 R3 kernel are pre-installed. For testing purposes one can also install a different operating system from the pre-installed one and develop software for PicoCOMA5. The available alternatives are WEC 7 and WEC 2013.

The starterkit consists of a base board with a plugged-on PicoCOMA5 and a cable kit. The base board offers connection possibilites for the following interfaces: Ethernet, USB Host, USB Device, 2x RS232, SD Card, I²C, SPI, Audio (Line In, Line Out) and I/ O-Ports. The power supply is 5V. The starterkit comes with a 7" WVGA TFT with resistive touch panel (ET070080) and fitting display adapter with film cable and touch cable. Documentation and software is available online in our download area.

Additionally we can offer you a 4-hour Workshop. Its goal is to learn how to handle the PicoCOMA5 starterkit and to finish the workshop with a running system. Under Windows you will have a closer look at Visual Studio .NET.

• Scope of Delivery
• Accessories

Scope of Delivery

PCOMA5-V2-W13/WCE
NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013, MQX
SKU: PCOMA5-V2-W13/WCE

PicoCOMA5/A9X/A7 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, SD Karte, I²C, SPI, Audio (Line In, Line Out) and E/A-Ports.
SKU: PCOM4-SKIT-FERT1

Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT

Produkt SINTF-CABKIT nicht vorhanden

Software

	UpDate Software This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card. SKU: WCE-UPDATE	500,- €
	Software .NET Drivers Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++. SKU: WCE-DOTNET	500,- €
	Boot Screen Shows the device's user a starting procedure while booting (BMP File). SKU: WCE-BOOTSCREEN	500,- €
	Custom Kernel Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added. SKU: WCE-CUSTIMAGE	500,- €
	Failsafe Flash Filesystem (F3S) The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing. SKU: WCE-F3S	1,000,- €
	Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows	500,- €

Displays and Display Kit

	7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15	120,- €
	Displaykit RGB 7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable SKU: NDCU-ADP/TFT-KIT	170,- €

Touch Kit

Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH

35,- €

Cables

40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23

10,- €

Adapters

	I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C	80,- €
	JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS	69,- €
	NetDCU/ PicoCOM DVI Adapter Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen. SKU: ADP-RGB2DVI	50,- €

Workshop

Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1

Request

Other Accessories

USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1

20,- €