PicoCore™MX6UL-V4-LIN
Computer On Module with NXP i.MX 6ULL CPU
For the start of development we recommend: |
PicoCore™MX6UL-V4-LIN | ||
State | Production | |
CPU | ||
CPU | NXP i.MX 6ULL | |
Core | ARM Cortex-A7 | |
No of Cores | 1 | |
Frequency | 900MHz | |
L2-Cache | 128KB | |
Operating System | ||
Linux | Buildroot/ Yocto (uboot installiert) |
|
Memory | ||
Flash | 4GB eMMC | |
RAM | 512MB | |
Interfaces | ||
SD-Card | 1x extern | |
Ethernet | max. 2x | |
USB Host | 1x | |
USB Device | 1x | |
CAN | max. 2x | |
UART | max. 6x | |
I2C | max. 4x | |
SPI | max. 4x | |
Audio | Line In/ Out/ Mic/ Headphone | |
Touch Panel | analog resistive und PCAP Touch ext. via I2C | |
RTC | external IC | |
additional Interfaces | max. 8x PWM, SPDIF, ESAI, 3x SAI, SSI ADR/ DATA Bus |
|
Display | ||
RGB | 24bit | |
Common | ||
Supply Voltage | +3.8V bis 5.5VDC | |
Power Consumption | 1-2W typ. | |
Operating Temperature | 0°C - +70°C opt. -20°C - +85°C |
|
Size | 35x40mm (LxB) |
|
Weight | ~10g | |
Long Term Availability | 2031 |
Starterkit 2 PicoCore™MX6UL Linux PicoCore™MX6UL-V3-LIN, base board, 7" RGB Display, cable kit, access data to documentation and software SKU: PCoreMX6UL-SKIT2-LIN |
360,- € | |||
Starterkit PicoCore™MX6UL Linux PicoCore™MX6UL-V3-LIN, base board, cable kit, access data to documentation and software SKU: PCoreMX6UL-SKIT-LIN |
240,- € |
Software
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | |||
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | |||
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display and Display Kits
7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18 |
150,- € | |||
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | |||
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Touch Kits
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | |||
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € |
Cable
50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41 |
10,- € |
Adapters
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € |
Plug Connector
PicoCore™ 80 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R80PS.3 |
20,- € |
Workshops
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | |||
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € |
Other Accesories
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | |||
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € |
Buildroot and Yocto
The Linux BSP "fsimx6ul-B2023.12" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or Wayland/Weston, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.
As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx6ul-Y2024.03, which is based on Yocto.
Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, wayland-weston, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more.
Both BSPs include the source code packages from U-Boot (2021.04), Linux kernel (based on 5.15.131/5.15.148) and Buildroot (2023.02.06) or Yocto (4.0) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.
F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 36 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
➜ More information about the new Buildroot Release B2023.12
➜ More information about the new YOCTO release Y2024.03
Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 27
Fedora 27 is a VirtualBox Appliance based on Fedora 27, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.
VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for fsimx6, fsimx6sx, fsimx6ul and fsimx7ulp.
The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.
Besides that, it contains a configured environment for Qt development (QT5) with cross-compile/debug kit, deployment strategy and demo application.
Please notice that it is required to register on our website to download this machine.
➜ Download F&S Development Machine - Fedora 27
➜ Quickstart Dokumentation
PicoCoreMX6UL - Product Flyer
- Deutsch (1.3 MB, pdf) - 23/03/2022
- English (1.3 MB, pdf) - 23/03/2022
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCoreMX6UL - Linux
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- Linux First Steps Documentation (2.5 MB, pdf) - 20/12/2023
- GPIO Reference Card (63 KB, pdf) - 22/03/2024
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- F&S Secure Boot (534 KB, pdf) - 19/03/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with Crank (485 KB, pdf) - 28/07/2022
- Application Development with QT5
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- Mono on F&S Boards (2.6 MB, pdf) - 17/11/2023
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCoreMX6UL - Hardware
- Hardware Documentation (1.6 MB, pdf) - 21/11/2022
- 3D Step Model (1.2 MB, zip) - 09/07/2024
- Starterkit Hardware Documentation (1.4 MB, pdf) - 07/01/2020
- Baseboard for Stepper Motors Hardware Documentation (713 KB, pdf) - 17/01/2020
- Starterkit Design Files (226 KB, zip) - 17/12/2018
- Starterkit Schematic (254 KB, pdf) - 17/12/2018
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variant
PicoCore™MX6UL-V3-LIN NXP i.MX 6ULL ARM Cortex-A7, 512MB RAM, 512MB SLC NAND Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, 0°C - +70°C, 3.8V..5,5V Supply, Linux Buildroot/Yocto SKU: PCoreMX6UL-V3-LIN |
Request |
Starterkits
Starterkit 2 PicoCore™MX6UL Linux PicoCore™MX6UL-V3-LIN, base board, 7" RGB Display, cable kit, access data to documentation and software SKU: PCoreMX6UL-SKIT2-LIN |
360,- € | |||
Starterkit PicoCore™MX6UL Linux PicoCore™MX6UL-V3-LIN, base board, cable kit, access data to documentation and software SKU: PCoreMX6UL-SKIT-LIN |
240,- € |
Accessories
PicoCore™ 80 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R80PS.3 |
20,- € | |||
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | |||
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € | |||
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | |||
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | |||
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | |||
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | |||
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | |||
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | |||
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € | |||
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
31 Oct, 12:14 |
U-boot Display |
31 Oct, 10:25 |
PicoCore Som version number |
30 Oct, 09:41 |
RTC - an occasional problem |
29 Oct, 09:30 |
Ethernet issue |
28 Oct, 14:27 |
Reset behaviour of GPIO-Pins |
23 Oct, 13:19 |
OSM Carrier Board Design Made Easy |
22 Oct, 08:34 |
Problem creating partitions using NBoot |
17 Oct, 08:55 |
How to install and configure the UDPusher driver |
16 Oct, 07:57 |
Wifi doesn't work. |
10 Oct, 13:20 |
Reset reason in U-Boot |