+49(0)711 123722-0
(0)
efus™MX8X
Computer On Module with NXP i.MX 8X CPU
|
|
|
Our valued distributor Batenburg Applied Technologies BV reports on the i.MX 8X processor from NXP and its use on the efus™MX8X. Read the article here.
Manhattan Skyline Ltd., another esteemed distributor of F&S, also reports on the efus™MX8X. Read the article here.
| efus™MX8X | ||
| State | Production | |
| CPU | ||
| CPU | NXP i.MX 8DualX/ QuadXPlus | |
| Core | ARM Cortex-A35 Cortex-M4 |
|
| No of Cores | 2x, 4x A35 +M4F | |
| Frequency | 1.2GHz | |
| L2-Cache | 512KB (ECC) | |
| GPU | 2D, 3D (GC7000 Lite, 4 shader) | |
| VPU | 4Kp30 | |
| Operating System | ||
| Linux | Buildroot/ Yocto (uboot installed) |
|
| Real Time | FreeRTOS | |
| Memory | ||
| Flash | max. 512MB QSPI NAND 1MB QSPI NOR |
|
| eMMC | max. 64GB | |
| RAM | LPDDR4 32 bit | |
| Interfaces | ||
| SD-Card | SDIO | |
| Ethernet | 2x 100/1000Mb (IEEE 1588, AVB) | |
| WiFi | 802.11ac/a/b/g/n | |
| BT | 5.0 LE | |
| USB Host | 1x USB 2.0 OTG | |
| USB Device | 1x USB 3.0 OTG | |
| CAN | 2x CAN-FD | |
| UART | 4x | |
| I2C | 4x | |
| SPI | 2x | |
| Audio | I2S | |
| Touch Panel | via I2C | |
| Camera analog/digital | MIPI-CSI parallel 8bit |
|
| PCIe | 1x PCIe 3.0 (1 lane) | |
| SATA | PCF85263 | |
| RTC | on board/ extern IC | |
| Display | ||
| LVDS | 2x 4 lanes (max.1080p) |
|
| MIPI-DSI | 2x 4 lanes (max. 2x1080p) |
|
| Common | ||
| Supply Voltage | +5VDC/ ±5% | |
| Power Consumption | 3W typ. | |
| Operating Temperature | 0°C - +70°C -25°C - +85°C -40°C - +85°C |
|
| Size | 47x62.1x11mm | |
| Weight | ~15g | |
| Long Term Availability | 2035 |
| efus™MX8X-V1-LIN | efus™MX8X-V4-LIN | |
| State | Production | Production |
| CPU | - | - |
| CPU | NXP i.MX 8DualX | NXP i.MX 8QuadXPlus |
| Core | ARM Cortex-A35 Cortex-M4 |
ARM Cortex-A35 Cortex-M4 |
| No of Cores | 2x A35 + M4F | 4x A35 + M4F |
| Frequency | 1.2 GHz | 1.2 GHz |
| L2-Cache | 512KB (ECC) | 512KB (ECC) |
| GPU | 2D, 3D (GC7000 Lite, 4 shader) | 2D, 3D (GC7000 Lite, 4 shader) |
| VPU | 4Kp30 | 4Kp30 |
| Operating System | - | - |
| Linux | Buildroot/ Yocto (uboot installed) |
Buildroot/ Yocto (uboot installed) |
| Real Time | FreeRTOS | FreeRTOS |
| Memory | - | - |
| Flash | 4GB eMMC | 4GB eMMC |
| eMMC | max. 64GB | max. 64GB |
| RAM | 1GB LPDDR4 | 1GB LPDDR4 |
| Interfaces | - | - |
| SD-Card | SDIO | SDIO |
| Ethernet | 1x 100/1000Mb (IEEE 1588, AVB) | 2x 100/1000Mb (IEEE 1588, AVB) |
| WiFi | 802.11ac/a/b/g/n | 802.11ac/a/b/g/n |
| BT | 5.0 LE with antenna socket | 5.0 LE |
| USB Host | 1x USB 2.0 OTG | 1x USB 2.0 OTG |
| USB Device | 1x USB 3.0 OTG | 1x USB 3.0 OTG |
| CAN | 2x CAN-FD | 2x CAN-FD |
| UART | 4x | 4x |
| I2C | 4x | 4x |
| SPI | 2x | 2x |
| Audio | I2S | I2S |
| Touch Panel | via I2C | via I2C |
| Camera analog/digital | MIPI-CSI parallel 8bit |
MIPI-CSI parallel 8bit |
| PCIe | 1x PCIe 3.0 (1 lane) | 1x PCIe 3.0 (1 lane) |
| SATA | PCF85263 | PCF85263 |
| RTC | extern RTC | extern RTC |
| Display | - | - |
| LVDS | 2x 24bit/1080p über MXM2 | 2x 4 lanes (max.1080p) |
| MIPI-DSI | 2x 4 lanes (max. 2x1080p) |
2x 4 lanes (max. 2x1080p) |
| Common | - | - |
| Supply Voltage | +5VDC/ ±5% | +5VDC/ ±5% |
| Power Consumption | 3W typ. | 3W typ. |
| Operating Temperature | -25°C - +85°C | -25°C - +85°C |
| Size | 47x62.1x11mm | 47x62.1x11mm |
| Weight | ~15g | ~15g |
| Long Term Availability | 2035 | 2035 |
| efus™MX8X-V1-LIN | efus™MX8X-V4-LIN |
Software
 |
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display
Touch Kit
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cables
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
 |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
 |
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € |
Plug Connector
 |
MXM-2 Connector For connecting efus™- or QBliss-modules via goldfinger contacts. SKU: B.MST.2R230PL.1 |
43,- € |
Workshop
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5 |
36,- € | ||
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € |
Buildroot and Yocto
The Linux BSP "fsimx8x-B2020.xx" is based on Buildroot, a software for the creation of root file systems. About 1400 different software packages can be added to the root file system via Buildroot. The range of functions extends from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or Wayland / Weston, including applications such as an HTML5-capable web browser. In this way, a tailor-made Linux system can be put together very easily.
As an alternative to Buildroot, there will also be a Yocto-based environment. We offer the Linux BSP fsimx8x-Y2020.xx, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functional range of the board, includes the following features: busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
Both BSPs will contain the source code packages of U-Boot, Linux kernel and buildroot or Yocto, which have been adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the standard configuration. And last but not least, detailed documents about the hardware are included as well as the first-steps documentation for an easy start.
F&S will offer a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to compile our software are already installed. Also all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it does not matter if you use Windows or Linux as host. Just download the VHD, import it into VirtualBox and the development can start immediately.
efusMX8X - Product Flyer
- English (467 KB, pdf) - 27/02/2024
- efus Standard (678 KB, pdf) - 30/10/2015
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
efusMX8X - Hardware
- efusMX8X Hardware Documentation (419 KB, pdf) - 07/12/2021
- efusMX8X Starterkit Hardware Documentation (3.7 MB, pdf) - 18/09/2020
- Starterkit Design Files (1.2 MB, zip) - 21/09/2020
- 3D Step Model (1.3 MB, zip) - 09/07/2024
- Design Guide (918 KB, pdf) - 15/04/2019
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
efusMX8X - Linux
- efusMX8X Linux First Steps (1.2 MB, pdf) - 11/08/2022
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- GPIO Reference Card (79 KB, pdf) - 11/08/2022
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- Mono on F&S Boards (2.6 MB, pdf) - 17/11/2023
- How to Write SD Card Image (121 KB, pdf) - 29/03/2021
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variant
 |
efus™MX8X-V4-LIN NXP i.MX 8QuadXPlus ARM Cortex-A35 + Cortex-M4, 1GB RAM, 4GB eMMC, 2x Gb Ethernet, 2x CAN, Audio, WLAN, BT, MIPI-CSI Camera, Touch, 2x LVDS, MIPI-DSI, -25°C - +85°C, 5V Supply, Linux Yocto, FreeRTOS SKU: efusMX8X-V4-LIN |
Request | ||
Starterkit
Software
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display
Touch Kit
|
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cables
|
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
|
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
|
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
|
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € |
Plug Connector
|
MXM-2 Connector For connecting efus™- or QBliss-modules via goldfinger contacts. SKU: B.MST.2R230PL.1 |
43,- € |
Workshop
|
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
|
efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5 |
36,- € | ||
|
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
|
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
|
16 Dec, 17:51 |
Repartitioning NAND Flash (via Yocto/ Patch) |
|
12 Dec, 09:21 |
SPIDEV probe function not called |
|
11 Dec, 12:16 |
CANscan: Powerful CAN Bus Testing and Communication Tool with Avalonia UI |
|
10 Dec, 09:13 |
request to introduce a github repo also for the toolchain with corresponding history |
|
05 Dec, 06:29 |
WEC 2013: How to close UDP Ports 137 and 138 / how to disable NetBIOS over TCP/IP |
|
04 Dec, 12:48 |
New i.MX8MP GPU Driver |
|
04 Dec, 09:32 |
Prevent efusA9 with WEC 2013 from sending Device Info |
|
03 Dec, 08:58 |
Change to winter time |
|
02 Dec, 15:12 |
Question: eMMC vs NAND storage |
|
30 Nov, 11:59 |
armStone A5 in a Plexlog Datalogger |
| Easy, Functional.. | ..Universal, Small | |
|---|---|---|
|
efus™MX8X is another compact and powerful module in efus™ form factor. Easy Base BoardAlong with the attribute of an easy baseboard (EasyLayout), efus™ has a size of 47x62mm only and is therefore suitable for compact housings. i.MX 8X Processor FamilyExtending the scalable range of the i.MX 8 series, the i.MX 8X with ARM® Cortex®-A35 and -M4 is comprised of common subsystems and architecture from the higher-end i.MX 8 family. Built with high-level integration to support graphics, video, image processing, audio, and voice functions, the i.MX 8X processor family is ideal for safety-certifiable and efficient performance requirements. |
Long-Term Availability up to 2035Another characteristic of the NXP i.MX 8X is its long availability at least until 2035. efus™MX8X comes with up to 2GB RAM and up to 512MB SLC NAND Flash. 64GB eMMC are available as well. Various InterfacesThe module offers interfaces like SD-Card, 2x Gbit Ethernet, 4x Serial, USB 3.0 Host/ 2.0 Device, 2x CAN, 4x I²C, 2x SPI and I²S Audio, as well as MIPI-CSI camera. The module offers WLAN and Bluetooth for wireless communication. The customized operating system (Linux Buildroot/Yocto) supports all interfaces, guaranteeing an easy software development without a deeper understanding of hardware. |
