phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Menu

efus™MX8X-V1-LIN

Computer On Module with NXP i.MX 8DualX Processor

 

efus™MX8X-V1-LIN  
State Samples  
CPU  
CPU NXP i.MX 8DualX  
Core ARM Cortex-A35 + -M4  
No of Cores 2x A35 + M4F  
Frequency 1.2 GHz  
L2-Cache 512KB (ECC)  
GPU 2D, 3D (GC7000 Lite, 4 shader)  
VPU 4Kp30  
Operating System  
Linux Buildroot/Yocto
(uboot installed)		  
Real Time FreeRTOS  
Memory  
Flash 4GB eMMC  
eMMC max. 64GB  
RAM 1GB LPDDR4  
Interfaces  
SD-Card external  
Ethernet 1x 100/1000Mb (IEEE 1588, AVB)  
USB Host 1x USB 2.0 OTG  
USB Device 1x USB 3.0 OTG  
CAN 2x CAN-FD  
UART 4x  
I2C 4x  
SPI 2x  
Audio I2S  
Touch Panel analog resistive and PCAP Touch ext. via I2C  
Camera analog/digital 0/MIPI-CSI2/ Parallel 8bit  
PCIe 1x PCIe 3.0 (1 lane)  
RTC external RTC  
Display  
LVDS 2x 24bit/1080p via MXM2  
MIPI-DSI 2x 4 lanes
(max. 2x1080p) 		 
Common  
Supply Voltage +5VDC/ ±5%  
Power Consumption 3W typ.  
Operating Temperature -25°C - +85°C  
Size 47x62.1x11mm
(LxBxH)		  
Weight ~15g  
Long Term Availability 2035  

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Display

Touch Kit

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  

Cables

B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C		 80,- €
 
ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 

Plug Connector

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

B.MST.VR.5 efus™ Latch
Allows to mount efus™ modules on the base board.
SKU: B.MST.VR.5		 36,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 

Buildroot and Yocto

The Linux BSP "fsimx8x-B2020.xx" is based on Buildroot, a software for the creation of root file systems. About 1400 different software packages can be added to the root file system via Buildroot. The range of functions extends from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or Wayland / Weston, including applications such as an HTML5-capable web browser. In this way, a tailor-made Linux system can be put together very easily.

As an alternative to Buildroot, there will also be a Yocto-based environment. We offer the Linux BSP fsimx8x-Y2020.xx, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functional range of the board, includes the following features: busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

Both BSPs will contain the source code packages of U-Boot, Linux kernel and buildroot or Yocto, which have been adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the standard configuration. And last but not least, detailed documents about the hardware are included as well as the first-steps documentation for an easy start.

F&S will offer a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to compile our software are already installed. Also all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it does not matter if you use Windows or Linux as host. Just download the VHD, import it into VirtualBox and the development can start immediately.

efusMX8X - Product Flyer

efusMX8X - Hardware

efusMX8X - Linux

Variant

efusMX8X TOP px efus™MX8X-V4-LIN
NXP i.MX 8QuadXPlus ARM Cortex-A35 + Cortex-M4, 1GB RAM, 4GB eMMC, 2x Gb Ethernet, 2x CAN, Audio, WLAN, BT, MIPI-CSI Camera, Touch, 2x LVDS, MIPI-DSI, -25°C - +85°C, 5V Supply, Linux Yocto, FreeRTOS
SKU: efusMX8X-V4-LIN		 Request  

Starterkit

on request

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Display

Touch Kit

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  

Cables

B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C		 80,- €
 
ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 

Plug Connector

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

B.MST.VR.5 efus™ Latch
Allows to mount efus™ modules on the base board.
SKU: B.MST.VR.5		 36,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint