+49(0)711 123722-0
(0)
Starterkit PicoCore™MX8MN Linux
|
|
|
Scope of Delivery
PicoCore™MX8MN-V5-LIN
NXP i.MX 8M Nano ARM Cortex-A53 + Cortex-M7, 512MB RAM, 4GB eMMC, 2x Gbit Ethernet, 1x CAN, Audio, MIPI-CSI Camera, Touch, LVDS, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MN-V5-LIN
PicoCore™100 Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT1B
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35
LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT4
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
Software
 |
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Displays
 |
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € |
Touch Kits
 |
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € | ||
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cables
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € | ||
 |
30poles Film Cable Film cable, 30pol., 0,5mm, l=100mm for displays To connect our B.LCD.22 display via ADP-MIPI2MIPI1 SKU: B.MKAB.55 |
10,- € |
Adapters
 |
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
| MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1 |
25,- € | |||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € | ||
 |
Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1 |
30,- € | ||
 |
MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B). SKU: ADP-MIPI2MIPI1 |
25,- € |
Plug Connector
 |
PicoCore™ 100 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R100PS.3 |
30,- € |
Workshops
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
|
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € |
 |
Starterkit PicoCore™MX8MN Linux PicoCore™MX8MN-V5-LIN, base board, display, cable kit, access data to documentation and Software SKU: PCoreMX8MN-SKIT-LIN |
360,- € |
Software
|
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Displays
|
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € |
Touch Kits
|
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € | ||
|
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cables
|
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € | ||
|
30poles Film Cable Film cable, 30pol., 0,5mm, l=100mm for displays To connect our B.LCD.22 display via ADP-MIPI2MIPI1 SKU: B.MKAB.55 |
10,- € | ||
 |
LVDS/MIPI Adapter Cable LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B) SKU: B.MKAB.44 |
22,- € |
Adapters
|
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
| MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1 |
25,- € | |||
|
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € | ||
|
Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1 |
30,- € | ||
|
MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B). SKU: ADP-MIPI2MIPI1 |
25,- € |
Plug Connector
|
PicoCore™ 100 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R100PS.3 |
30,- € |
Workshops
|
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
|
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
Other Accessories
|
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
|
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € | ||
 |
Heat Spreader PicoCore100 Heat spreader for cooling PicoCore boards. SKU: MHS.PC100.1 |
10,- € |
Variants
 |
PicoCore™MX8MN-V1-LIN NXP i.MX 8M Nano ARM Cortex-A53 + Cortex-M7, 256MB RAM, 256MB Flash, Audio, MIPI-CSI Camera, Touch, MIPI-DSI, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MN-V1-LIN |
Request | ||
 |
PicoCore™MX8MN-V5-LIN NXP i.MX 8M Nano ARM Cortex-A53 + Cortex-M7, 512MB RAM, 4GB eMMC, 2x Gbit Ethernet, 1x CAN, Audio, MIPI-CSI Camera, Touch, LVDS, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MN-V5-LIN |
Request | ||
Starterkits
|
Starterkit PicoCore™MX8MN Linux PicoCore™MX8MN-V5-LIN, base board, display, cable kit, access data to documentation and Software SKU: PCoreMX8MN-SKIT-LIN |
360,- € |
Buildroot and Yocto
The Linux BSP "fsimx8mn-B2020.xx" is based on Buildroot, a software for the creation of root file systems. About 1400 different software packages can be added to the root file system via Buildroot. The range of functions extends from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or Wayland / Weston, including applications such as an HTML5-capable web browser. In this way, a tailor-made Linux system can be put together very easily.
As an alternative to Buildroot, there will also be a Yocto-based environment. We offer the Linux BSP fsimx8mn-Y2020.xx, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functional range of the board, includes the following features: busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
Both BSPs will contain the source code packages of U-Boot, Linux kernel and buildroot or Yocto, which have been adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the standard configuration. And last but not least, detailed documents about the hardware are included as well as the first-steps documentation for an easy start.
F&S will offer a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to compile our software are already installed. Also all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it does not matter if you use Windows or Linux as host. Just download the VHD, import it into VirtualBox and the development can start immediately.
➜ Mehr Informationen über das neue Buildroot Release B2023.11
➜ Mehr Informationen über das neue Yocto Release Y2024.02
PicoCoreMX8MN - Product Flyer
- Quick Facts (1.2 MB, pdf) - 06/05/2022
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
PicoCoreMX8MN - Hardware
- Hardware Documentation for PicoCoreMX8MN with DDR3L (1007 KB, pdf) - 15/11/2021
- Hardware Documentation for PicoCoreMX8MN with LPDDR4 (1.2 MB, pdf) - 19/06/2024
- 3D Step Model PicoCoreMX8MN-LPDDR4 HW Rev 130 (1.7 MB, zip) - 09/07/2024
- 3D Step Model PicoCoreMX8MNr2-LPDDR4 HW Rev 100 (1.6 MB, zip) - 09/07/2024
- 3D Step Model PicoCoreMX8MN-DDR3L HW Rev 120 (1.9 MB, zip) - 09/07/2024
- Carrier board PCoreBBDSI Hardware Documentation (2.1 MB, pdf) - 10/01/2023
- Carrier board PCoreBBDSI Design Files (14 MB, zip) - 25/09/2024
- Carrier board PCoreBBDSI Gerber Files (772 KB, zip) - 09/09/2021
- Carrier board PCoreBBDSI 3D Files (21 MB, zip) - 15/12/2021
- Carrier board PCoreBBDSI Placement (5.7 MB, pdf) - 09/09/2021
- Carrier board PCoreBBDSI Schematic (2.9 MB, pdf) - 20/06/2024
PicoCoreMX8MN - Linux
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- PicoCoreMX8MN Linux First Steps (1.1 MB, pdf) - 07/10/2024
- GPIO Reference Card-V5 (66 KB, pdf) - 07/01/2022
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with Crank (485 KB, pdf) - 28/07/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- How to Write SD Card Image (121 KB, pdf) - 29/03/2021
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
- F&S Support Forum - (external link)
Variants
|
PicoCore™MX8MN-V1-LIN NXP i.MX 8M Nano ARM Cortex-A53 + Cortex-M7, 256MB RAM, 256MB Flash, Audio, MIPI-CSI Camera, Touch, MIPI-DSI, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MN-V1-LIN |
Request | ||
|
PicoCore™MX8MN-V5-LIN NXP i.MX 8M Nano ARM Cortex-A53 + Cortex-M7, 512MB RAM, 4GB eMMC, 2x Gbit Ethernet, 1x CAN, Audio, MIPI-CSI Camera, Touch, LVDS, 0°C - +70°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MN-V5-LIN |
Request | ||
Starterkits
|
Starterkit PicoCore™MX8MN Linux PicoCore™MX8MN-V5-LIN, base board, display, cable kit, access data to documentation and Software SKU: PCoreMX8MN-SKIT-LIN |
360,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
|
03 Apr, 15:54 |
How far along is Linux v6.6.x for PicoCores? |
|
03 Apr, 15:52 |
F&S i.MX8M-Mini Yocto Pre Release 2025.04 (fsimx8mm-Y2025.04-pre) |
|
03 Apr, 11:23 |
Custom variant for PicoCoreMX6ULL100 |
|
01 Apr, 11:37 |
Phy link never came up / pcie failed with error -110 |
|
01 Apr, 11:35 |
F&S i.MX8M-Plus Yocto Pre-Release 2025.03 (fsimx8mp-Y2025.03-pre) |
|
24 Mar, 13:17 |
WEC 2013 Firewall FWS0: How to make service start automatically |
|
24 Mar, 11:24 |
Touch |
|
18 Mar, 08:32 |
Unable to build u-boot for PicoCore™MX8MM |
|
11 Mar, 11:43 |
EDMA SAI1 error |
|
10 Mar, 09:50 |
UBIFS "Corrupt empty space": Handling of 0-bits in empty NAND pages |
