+49(0)711 123722-0
(0)
FS 93 OSM-SF
OSM Size S with NXP i.MX 93 Processor
|
|
For the start of development, we recommend: |
| FS 93 OSM-SF | ||
| State | Production | |
| CPU | ||
| CPU | NXP i.MX 93 | |
| Core | ARM Cortex-A55 Cortex-M33 NPU |
|
| No of Cores | 1/ 2 A55 + M33 | |
| Frequency | 1.7GHz + 250MHz | |
| L2-Cache | 2x64kB L2 + 256kB L3 | |
| GPU | PXP | |
| Operating System | ||
| Linux | Yocto (uboot installed) |
|
| Real Time | FreeRTOS | |
| Memory | ||
| Flash | 64 kbit EEPROM | |
| eMMC | max. 64GB | |
| RAM | max. 2GB LPDDR4 x16 | |
| Interfaces | ||
| SD-Card | 1x SDIO | |
| Ethernet | 2x RGMII | |
| USB Host | 1x OTG 2.0 | |
| USB Device | 1x OTG 2.0 | |
| CAN | 2x CAN-FD | |
| UART | 4x | |
| I2C | 4x | |
| SPI | 2x | |
| Audio | I2S | |
| Digital I/O | 10 GPIO_A+_C[4..7] |
|
| ADC | 2x | |
| Touch Panel | Touch via I2C | |
| Camera analog/digital | MIPI-CSI (2 lanes) |
|
| RTC | PCF85263ATL | |
| additional Interfaces | 2x PWM, BL-PWM | |
| Display | ||
| LVDS | 1x 4 Lanes | |
| MIPI-DSI | 1x 4 Lanes | |
| Common | ||
| Supply Voltage | 5V DC/±5% | |
| Power Consumption | 3W typ. | |
| Operating Temperature | 0°C - +70°C -25°C - +85°C -40°C - +85°C |
|
| Size | 30x30mm | |
| Weight | ~5g | |
| Long Term Availability | 2038 |
| FS 93 OSM-SF-V1I | FS 93 OSM-SF-V5I | |
| State | Production | Production |
| CPU | - | - |
| CPU | NXP i.MX 93 | NXP i.MX 93 |
| Core | ARM Cortex-A55 + Cortex-M33 + NPU | ARM Cortex-A55 + Cortex-M33 + NPU |
| No of Cores | 2x A55 + M33 | 2x A55 + M33 |
| Frequency | 1,7GHz + 250MHz | 1,7GHz + 250MHz |
| L2-Cache | 2x64kB L2 + 256kB L3 | 2x64kB L2 + 256kB L3 |
| GPU | PXP | PXP |
| Operating System | - | - |
| Linux | Yocto (uboot installed) |
Yocto (uboot installed) |
| Real Time | FreeRTOS | FreeRTOS |
| Memory | - | - |
| Flash | 64 kbit EEPROM | 64 kbit EEPROM |
| eMMC | 8GB eMMC | 8GB eMMC |
| RAM | 1GB LPDDR4 x16 | 1GB LPDDR4 x16 |
| Interfaces | - | - |
| SD-Card | 1x SDIO | 1x SDIO |
| Ethernet | 2x RGMII | 2x RGMII |
| USB Host | 1x OTG 2.0 | 1x OTG 2.0 |
| USB Device | 1x OTG 2.0 | 1x OTG 2.0 |
| CAN | 2x CAN-FD | 2x CAN-FD |
| UART | 4x | 4x |
| I2C | 4x | 4x |
| SPI | 2x | 2x |
| Audio | I2S | I2S |
| Digital I/O | 6 GPIO_A[1..0]+_C[4..7] |
6 GPIO_A[1..0]+_C[4..7] |
| ADC | 2x | 2x |
| Touch Panel | Touch via I2C | Touch via I2C |
| Camera analog/digital | MIPI-CSI (2 lanes) | MIPI-CSI (2 lanes) |
| RTC | PCF85263ATL | PCF85263ATL |
| additional Interfaces | 2x PWM, BL-PWM | 2x PWM, BL-PWM |
| Display | - | - |
| LVDS | 1x 4 Lanes | - |
| MIPI-DSI | 1x 4 Lanes | 1x 4 Lanes |
| Common | - | - |
| Supply Voltage | 5V DC/±5% | 5V DC/±5% |
| Power Consumption | 3W typ. | 3W typ. |
| Operating Temperature | -20°C - +85°C | -20°C - +85°C |
| Size | 30x30mm | 30x30mm |
| Weight | ~5g | ~5g |
| Long Term Availability | 2038 | 2038 |
| FS 93 OSM-SF-V1I | FS 93 OSM-SF-V5I |
 |
Starterkit FS 93 OSM-SF Linux Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software. SKU: OSM93-SKIT-LIN |
360,- € |
Software
 |
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € |
Displays and Display Kits
 |
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € | ||
 |
7” LVDS Display with PCAP Touch (long-term available) 7” LVDS LCD Display with PCAP Touch SKU: LCD.7.LVDS.1 |
95,- € | ||
 |
10” LVDS Display with PCAP Touch (long-term available) 10” LVDS LCD Display with PCAP Touch SKU: LCD.10.LVDS.1 |
130,- € |
Touch-Kits
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
 |
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € | ||
Cables
 |
Capacitive Touch Cable 6-pin cable with matching connector for connecting an I2C touch to F&S boards SKU: B.MKAB.47 |
10,- € | ||
| Backlight Cable Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1). SKU: B.MKAB.35 |
7,- € |
Adapters
| MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1 |
25,- € | |||
 |
Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1 |
30,- € |
Workshops
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
Heat Spreader OSM Size-S Heat Spreader for cooling the OSM Size-S modules SKU: MHS.OSM.1 |
10,- € |
Variants
 |
FS 93 OSM-SF-V1I NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, LVDS, RTC, -20°C - +85°C, Linux SKU: OSM93-V1I |
Request | ||
|
FS 93 OSM-SF-V5I NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, MIPI-DSI, RTC, -20°C - +85°C, Linux SKU: OSM93-V5I |
Request | ||
Starterkit
|
Starterkit FS 93 OSM-SF Linux Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software. SKU: OSM93-SKIT-LIN |
360,- € |
Yocto Release Y2024.09
For the CPU NXP i.MX93 F&S offers a Yocto based environment. We offer the Linux BSP fsimx93-Y2024.09-pre, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
The BSP is based on the following source code packages:
- U-Boot: 2024.04
- Linux-Kernel: 6.6.48
- Yocto: 5.0.3 Scarthgap
Also included is our cross toolchain, some sample applications, and all binaries in the default configuration.
F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
FS 93 OSM-SF - Product Flyer
- Product Flyer (357 KB, pdf) - 17/10/2024
Usage
By downloading you accept our general terms and conditions.
FS 93 OSM-SF - Hardware
- FS 93 OSM-SF Hardware Documentation (1.4 MB, pdf) - 20/09/2024
- OSM Cooling Solution (592 KB, pdf) - 16/04/2024
- OSM Implementation Guide (742 KB, pdf) - 11/11/2024
- OSM Carrier Board Design
- OSM Carrier Board Design (12 MB, zip) - 13/12/2024
- Hardware Documentation ADP-OSM-BB (1.2 MB, pdf) - 05/07/2024
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
FS 93 OSM-SF - Linux
- OSM93 Linux First Steps (2.1 MB, pdf) - 06/11/2024
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variants
|
FS 93 OSM-SF-V1I NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, LVDS, RTC, -20°C - +85°C, Linux SKU: OSM93-V1I |
Request | ||
|
FS 93 OSM-SF-V5I NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, MIPI-DSI, RTC, -20°C - +85°C, Linux SKU: OSM93-V5I |
Request | ||
Starterkit
|
Starterkit FS 93 OSM-SF Linux Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software. SKU: OSM93-SKIT-LIN |
360,- € |
Link to the forum
You can find support at any time in our Forum.
Current contributions
|
16 Dec, 17:51 |
Repartitioning NAND Flash (via Yocto/ Patch) |
|
12 Dec, 09:21 |
SPIDEV probe function not called |
|
11 Dec, 12:16 |
CANscan: Powerful CAN Bus Testing and Communication Tool with Avalonia UI |
|
10 Dec, 09:13 |
request to introduce a github repo also for the toolchain with corresponding history |
|
05 Dec, 06:29 |
WEC 2013: How to close UDP Ports 137 and 138 / how to disable NetBIOS over TCP/IP |
|
04 Dec, 12:48 |
New i.MX8MP GPU Driver |
|
04 Dec, 09:32 |
Prevent efusA9 with WEC 2013 from sending Device Info |
|
03 Dec, 08:58 |
Change to winter time |
|
02 Dec, 15:12 |
Question: eMMC vs NAND storage |
|
30 Nov, 11:59 |
armStone A5 in a Plexlog Datalogger |
| OSM | with NXP i.MX 93 | |
|---|---|---|
|
The SDT.05 standardisation group was founded at SGET with the aim of defining a standard for a direct solution module. The founding members were IESY GmbH, F&S Elektronik Systeme GmbH and Kontron AG. The advantages of an OSM module are that it can be machine controlled and offers high performance and functions in a small space. The costs and the risk of using connectors are eliminated. Our OSM module in size S is ideally suited for the i.MX 93 application processors from NXP. These NXP CPUs offer efficient machine learning (ML) acceleration and advanced security with integrated EdgeLock® Secure Enclave to support energy-efficient edge computing. The i.MX 93 application processors are the first in the i.MX portfolio to integrate the scalable Arm Cortex-A55 core, which makes Linux®-based edge applications more powerful and energy efficient, and the Arm Ethos™-U65 MicroNPU, enabling developers to build more powerful, cost-effective and energy-efficient ML applications. The i.MX 93 processors, which optimise performance and energy efficiency for industrial, IoT and automotive devices, are based on NXP's innovative Energy Flex architecture. The SoCs offer a comprehensive range of peripherals for the automotive, industrial and consumer IoT market segments. The new OSM module from F&S will be equipped with the i.MX 93 with 2x Cortex-A55 @1.7GHz. A powerful CPU with up to 125° junction temperature. RAM, flash on board and interfaces such as LAN, CAN, USB, SDIO, UART, I2C, SPI, audio, GPIO, MIPI-CSI and MIPI-DSI are available. |
Heterogeneous multi-core processor conceptThe i.MX 93 is a heterogeneous multi-core application processor for embedded modules. It is ideal for applications that require powerful graphics processing and multimedia functions as well as Industry 4.0 applications. The processor consists of a single or dual ARM® Cortex®-A35 core with up to 1 GHz and a Cortex®-M33 core for real-time processing with 216 MHz. The processor also features a HIFI 4 DSP. The i.MX 8ULP offers various audio and voice functions via I2S. ➜ More information about the NXP i.MX 93In addition to the OSM module, F&S Elektronik also offers the development and manufacture of a suitable baseboard and then delivers the complete unit supplied, tested and, if required, with customer software installed, so that all that remains to be done is to unpack, install and switch it on. The operating system customised for the OSM modules is Linux. Linux Yocto supports all interfaces so that simple software development can be guaranteed without extensive hardware knowledge. FreeRTOS is available to control the real-time kernel (if available). Development boardFor an easy start to development, we offer an OSM starter kit ready to run with OSM modules, baseboard, 3.5" MIPI display, cables and access to documentation and software. The software includes the board support package and toolchain for Bare Metal or FreeRTOS. The range is rounded off by a broad spectrum of Software-Services, Workshops and free support via the Forum, E-Mail und Telefon. |
