phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Menu

QBlissA9r2

Qseven with NXP i.MX 6 CPU

For the start of development, we recommend:

Starterkit QBlissA9r2 Linux
  340,- €
Tax not included

QBlissA9r2-V2-LIN, base board, cable kit, access data to documentation and software


Starterkit QBlissA9r2 Windows
  340,- €
Tax not included

QBlissA9r2-V2-WEC7, base board, cable kit, access data to documentation and software

QBlissA9r2  
State Production  
CPU  
CPU NXP i.MX 6  
Core ARM Cortex-A9  
No of Cores Solo/DualLite/Quad/QuadPlus  
Frequency max 1GHz  
L2-Cache max. 1MB  
GPU 3D 1000Mpix/s  
VPU 1080p60  
Operating System  
Linux Buildroot
Yocto		  
Windows WEC 7
WEC 2013		  
Memory  
Flash max. 1GB SLC
max. 32GB eMMC		  
RAM max. 4GB DDR3  
Interfaces  
SD-Card 1x extern  
Ethernet 10/100/1000Mb
IEEE 1588		  
USB Host 4x  
USB Device 1x  
CAN 1x  
UART 1x  
I2C 2x  
SPI 1x  
Audio AC97  
Digital I/O max. 66  
Touch Panel via AC97  
Camera analog/digital 0/2x MIPI-CSI  
PCIe 1x  
SATA 1x  
Display  
LVDS 2x 24bit  
CRT/DVI 0/DVI  
Common  
Supply Voltage +5V DC/ ±5%  
Power Consumption 4W typ.  
Operating Temperature 0°C - +70°C
opt. -20°C - +85°C
opt. -40°C - +85°C		  
Size 70x70x11mm
(LxBxH)		  
Weight ~25g  
Long Term Availability 2035  


QBlissA9r2-V1-LIN QBlissA9r2-V1-WEC7 QBlissA9r2-V1-W13 QBlissA9r2-V2-LIN QBlissA9r2-V2-WEC7 QBlissA9r2-V2-W13
State Production Production Production Production Production Production
CPU - - - - - -
CPU NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 NXP i.MX 6
Core ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9
No of Cores Solo Solo Solo Quad Quad Quad
Frequency 1GHz 1GHz 1GHz 1GHz 1GHz 1GHz
L2-Cache 512KB 512KB 512KB 1MB 1MB 1MB
GPU 2D 600Mpix/s 2D 600Mpix/s 2D 600Mpix/s 3D 1000Mpix/s 3D 1000Mpix/s 3D 1000Mpix/s
VPU 1080p30 1080p30 1080p30 1080p60 1080p60 1080p60
Operating System - - - - - -
Linux Buildroot
Yocto		 - - Buildroot
Yocto		 - -
Windows - WEC 7 WEC 13 - WEC 7 WEC 2013
Memory - - - - - -
Flash 128MB 256MB 256MB 256MB
min. 4GB eMMC		 256MB
min. 4GB eMMC		 256MB
min. 4GB eMMC
RAM 512MB 512MB 512MB 1GB 1GB 1GB
Interfaces - - - - - -
SD-Card 1x extern 1x extern 1x extern 1x extern 1x extern 1x extern
Ethernet 10/100/1000Mb
IEEE 1588		 10/100/1000Mb
IEEE 1588		 10/100/1000Mb
IEEE 1588		 10/100/1000Mb
IEEE 1588		 10/100/1000Mb
IEEE 1588		 10/100/1000Mb
IEEE 1588
USB Host 4x 4x 4x 4x 4x 4x
USB Device 1x 1x 1x 1x 1x 1x
CAN 1x 1x 1x 1x 1x 1x
UART 1x 1x 1x 1x 1x 1x
I2C 2x 2x 2x 2x 2x 2x
SPI 1x 1x 1x 1x 1x 1x
Audio AC97 AC97 AC97 AC97 AC97 AC97
Digital I/O max. 66 max. 66 max. 66 max. 66 max. 66 max. 66
Touch Panel via AC97 via AC97 via AC97 via AC97 via AC97 via AC97
Camera analog/digital - - - 0/2x MIPI-CSI 0/2x MIPI-CSI 0/2x MIPI-CSI
PCIe - - - 1x 1x 1x
SATA - - - 1x 1x 1x
Display - - - - - -
LVDS 2x 24bit 2x 24bit 2x 24bit 2x 24bit 2x 24bit 2x 24bit
CRT/DVI 0/DVI 0/DVI 0/DVI 0/DVI 0/DVI 0/DVI
Common - - - - - -
Supply Voltage +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5%
Power Consumption 4W typ. 4W typ. 4W typ. 4W typ. 4W typ. 4W typ.
Operating Temperature 0°C - +85°C 0°C - +85°C 0°C - +85°C 0°C - +85°C 0°C - +85°C 0°C - +85°C
Size 70x70x11mm
(LxBxH)		 70x70x11mm
(LxBxH)		 70x70x11mm
(LxBxH)		 70x70x11mm
(LxBxH)		 70x70x11mm
(LxBxH)		 70x70x11mm
(LxBxH)
Weight ~25g ~25g ~25g ~25g ~25g ~25g
Long Term Availability 2035 2035 2035 2035 2035 2035
QBlissA9r2-V1-LIN QBlissA9r2-V1-WEC7 QBlissA9r2-V1-W13 QBlissA9r2-V2-LIN QBlissA9r2-V2-WEC7 QBlissA9r2-V2-W13

Starterkit QBlissA9r2 Linux
QBlissA9r2-V2-LIN, base board, cable kit, access data to documentation and software
SKU: QBlissA9r2-SKIT-LIN		 340,- €
 
Starterkit QBlissA9r2 Windows
QBlissA9r2-V2-WEC7, base board, cable kit, access data to documentation and software
SKU: QBlissA9r2-SKIT-WEC7		 340,- €
 

Software

 

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET		 500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN		 500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE		 500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S		 1,000,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE		 500,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 

Display

Adapter

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 

Plug Connector

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 

Buildroot and Yocto

The Linux BSP "fsimx6-B2020.04" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt, Wayland/Weston or X11, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.

As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx6-Y2020.03, which is based on Yocto.

Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more

Both BSPs include the source code packages from U-Boot (2018.03), Linux kernel (based on 4.9.88) and Buildroot (2019.05.01) or Yocto (2.4) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Buildroot Release B2020.04
➜ More information about the new YOCTO release Y2020.03

Windows Embedded Lifetime

Feature Available until  End of Mainstream Support End of Extended Support
Windows Embedded Compact 2013 31.05.2028  10.09.2018 10.10.2023
Windows Embedded Compact 7 28.02.2026  12.04.2016 13.04.2021
Windows CE 6.0 28.02.2022  09.04.2013 10.04.2018

Windows Embedded Compact 7

Windows Embedded Compact 7 offers bootloaders, kernels (e.g. with Silverlight, Mediaplayer or IE) and interface drivers for almost every offered interface are ready to use.
Hard work with platform builder can be dropped, we already did that for you.
Create your software with Visual Studio .NET in the languages C, C++, C# or VB.NET.
Use interfaces like I²C the same way like a RS232 interface without having to handle the underlying hardware.
Configure the display and other settings with the F&S configuration tool.

Our FailSafe Flash File System F3S is also available on Compact 7.

Windows Embedded Compact 2013

The highly flexible and hard real-time operating system has kernel, interface drivers and bootloader. It benefits from all the features of a modern CPU, such as ARMv7 THUMB2 command structure or NEON co-processor.
Complete images and the BSP are available in our download area.
Development is done with the latest Microsoft tools like Visual Studio 2015 (C, C++, C# or VB.NET) and Expression Blend 5.
Interfaces like I²C, CAN or SPI can be used in the same way like a RS232 interface.
XAML for Windows Embedded helps to separate visualisation and program the easy way.
Our FailSafe Flash File System F3S is also available in Compact 2013.

Windows Embedded Features for i.MX6

General

Feature Description i.MX6 WEC 2013
.NET Support Library to easily access DIO, CAN, I²C and SPI from .NET Compact Framework ✔ ✔
AnalogIn Stream driver to easily access the analog inputs ✔ ✔
Audio Codec Support for Microphone, LineIn and LineOut.
Implements Mixer interface and special F&S mixer control panel applet to easily change settings.		 ✔ ✔
BusEnum2 Support for asynchronous loading of drivers. Use events to start loading of drivers.  ✔ ✔
Broadcast Stream driver
Boards can be easily identified and configured over LAN connection		 ✔ ✔
CAN Stream driver to easily access CAN interface. Special tool suit to generate traffic or check communication. ✔ ✔
Digital I/O  Stream driver to configure pins as input, output or interrupt.
Possibility to adjust drive strength or enable/disable internal pull-up or pull-down. Settings can be stored pin registry.		 ✔ ✔
Display Display driver can be configured by registry settings without modifying operating system. ✔ ✔
Display Multi-Monitor Support
Adjustable by registry		 ✔  ✔
Display 2D software acceleration using NEON co-processor
Multiple overlays with alpha blending 		 ✔ ✔
Display 2D hardware acceleration
3D OpenGL ES 1.1 and 2.0 hardware acceleration
Multiple overlays with alpha blending
Multiple monitor support (incl. 2D acceleration and Video support)		 ✔  ✔
Firmware Update Software to update Bootloader and/or operating system from running operating system. ✔ ✔ 
Software Update Program to update application and registry settings from USB stick, SD card or other source.
Includes automatic detection. Can incorporate with Firmware Update		 ✔ ✔
I²C Stream driver
Support for hardware I²C controller (NI2C)
Support for using GPIOs as I²C (I²C)		 ✔ ✔
Keyboard Support for German 0407, Spanish 040A, French 040C, Italy 0410 and English 0409
Matrix keyboard support: Use IO pins for keyboard		 ✔ ✔
SPI Stream driver
Support for hardware SPI controller		 ✔ ✔
Touch Resistive touch driver with virtual key support - Capacitive touch driver for ATMEL EDT and others
Extended USB mouse driver to accept absolute coordinates		 ✔ ✔
USB Host EHCI and OHCI driver ✔ ✔
USB Device   ✔ ✔
KBDHID Extended MS kbdhid - Support for all keys on the keyboard ✔ ✔
MOUTOUCHHID Support for absolute coordinates ✔ ✔
Power Management Support for screen saver and touch activation ✔ ✔
PWM Stream driver ✔ ✔
Video Streaming Filter framework for streaming video over HTTP ✔ ✔
VoIP Voice over IP sample solution ✔  

File System

Feature Description i.MX6 WEC 2013
F&S BinFS Bug fixed BinFS file system for XIP images ✔ ✔
F3S F&S Secure Flash File System
Optimized throughput on all file operations
Wear-Leveling strategies to reduce flash abrasion (including Garbage Collector)
Transaction-based concept already cooperates with a lot of applications  		 ✔ ✔
Filesystem
Filter Driver		 Used to limit access to file system.
Possible restrictions: Move, Delete, Rename		 ✔ ✔
FAT/TFAT Microsoft Windows Embedded FAT/TFAT solution. ✔ ✔
NAND Driver 16 bit hardware ECC   ✔

Services

Feature Description i.MX6 WEC 2013
Telnet Server Enabled by default. Easy access to command shell. ✔ ✔
FTP Server   ✔ ✔
HTTPD Server Use device as web server. Create ISAPI extensions in C/C++. HTTPD DirectShow stream filter (i.e. camera) ✔ ✔
OpenSSH Offers SSH server functionality for Windows Embedded. Based on OpenSSH
SFTP
SCP
SMTP		 ✔ ✔
SSH SCP/SFTP server SSH Library (also used from SMTP).  ✔ ✔
SMTP SMTP library to send EMail ✔ ✔

Tools

Feature Description i.MX6 WEC 2013
Bootscreen Showing custom image during boot. ✔ ✔
Control Panel Standard Windows Embedded Control Panel with additional tools. ✔ ✔
CE Remote Display Driver and application to access desktop of device remotely. ✔ ✔
ndcucfg Command line configuration tool.
Can be used locally, over Telnet connection and over serial connection.
Registry editing
Reading/writing of boot loaders and splash screen
User administration
Certificate administration
....
Usage:
* Can be used in own applications as DLL.
* As a command line tool from telnet or serial debug console		 ✔ ✔
Update tool Update of boot loader
Update on WinCE image
Registry changes
Update of user application
Runs from SD/USB/LAN		 ✔ ✔
F&S 2D control utility Control panel applet
Change 2D acceleration on the fly		 ✔ ✔
F&S Board Config Control panel applet
Check hardware revision, version of boot loader, version of WinCE image and much more.
Change system startup and registry.		 ✔ ✔
F&S Audio Mixer Control panel applet
Change audio features like volume, bass, treble, input ...		 ✔ ✔
F&S SSH/SMTP control utility Control panel applet
Start stop SSHD service
Send test EMail by SMTP		 ✔ ✔
F&S USB Loader Uses USB device connection to update Bootloader, operating system, boot screen, configuration information, partition information.
Can be used to update software or to automate production.		 ✔ ✔
F&S Mfg Tool Modified NXP Tool for board bring up and software installation ✔ ✔

QBlissA9r2 - Product Flyer


QBlissA9r2 - Hardware


QBlissA9r2 - Linux


QBlissA9r2 - Windows Embedded CE/Compact


Sorry, there are no files to show.


QBlissA9r2 - Display

Variants

QBlissA9r2 TOP QBlissA9r2-V2-W13
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, min. 4GB eMMC, Gb Ethernet, CAN, Audio, PCIe, SATA, MIPI-CSI Camera, Touch, 2x LVDS, DVI, 0°C - +85°C, 5V Supply, Windows Embedded Compact 2013
SKU: QBlissA9r2-V2-W13		 Request  
QBlissA9r2 TOP QBlissA9r2-V2-WEC7
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, min. 4GB eMMC, Gb Ethernet, CAN, Audio, PCIe, SATA, MIPI-CSI Camera, Touch, 2x LVDS, DVI, 0°C - +85°C, 5V Supply, Windows Embedded Compact 7
SKU: QBlissA9r2-V2-WEC7		 Request  
QBlissA9r2 TOP QBlissA9r2-V2-LIN
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, min. 4GB eMMC, Gb Ethernet, CAN, Audio, PCIe, SATA, MIPI-CSI Camera, Touch, 2x LVDS, DVI, 0°C - +85°C, 5V Versorgung, Linux Buildroot/Yocto
SKU: QBlissA9r2-V2-LIN		 Request  
QBlissA9r2 TOP QBlissA9r2-V1-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, 2x LVDS, Touch, DVI, 0°C - +85°C, 5V Supply, Linux Buildroot/Yocto
SKU: QBlissA9r2-V1-LIN		 Request  
QBlissA9r2 TOP QBlissA9r2-V1-WEC7
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, 2x LVDS, Touch, DVI, 0°C - +85°C, 5V Supply, Windows Embedded Compact 7
SKU: QBlissA9r2-V1-WEC7		 Request  
QBlissA9r2 TOP QBlissA9r2-V1-W13
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, 2x LVDS, Touch, DVI, 0°C - +85°C, 5V Supply, Windows Embedded Compact 2013
SKU: QBlissA9r2-V1-W13		 Request  

Starterkits

Starterkit QBlissA9r2 Linux
QBlissA9r2-V2-LIN, base board, cable kit, access data to documentation and software
SKU: QBlissA9r2-SKIT-LIN		 340,- €
 
Starterkit QBlissA9r2 Windows
QBlissA9r2-V2-WEC7, base board, cable kit, access data to documentation and software
SKU: QBlissA9r2-SKIT-WEC7		 340,- €
 

Software

 

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET		 500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN		 500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE		 500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S		 1,000,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE		 500,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 

Display

Adapter

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 

Plug Connector

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 

   

Qseven Form Factor

Since the Qseven™ form factor was introduced; many manufacturers of boards and software have adopted it. The combination of Qseven™ and RISC gains more and more importance. The reason is the compatibility of the offered boards, as well as the small form factor (70x70mm) with an inexpensive plug connector. 

Long-term Availability

QBlissA9r2 uses a NXP i.MX 6 ARM® Cortex®-A9 CPU. Another characteristic is the long availability of the CPU of at least 15 years (NXP Product Longevity Program).

Multimedia CPU

Especially for multimedia, additional hardware units are available in i.MX6, relieving the CPU significantly and having a positive effect on fluid displaying and low power consumption. 

  

QBlissA9r2 comes with up to 4GByte DDR3 RAM, 1GByte SLC Flash, 32GB eMMC as well as Gigabit Ethernet. Further interfaces of QBlissA9r2 are USB 2.0 Host, USB 2.0 Device, CAN, I²C, SPI, AC97, SDIO, PCIe, SATA, MIPI-CSI Camera, serial interfaces as well as DVI (up to HD1080).

High-End Computer Graphics

The QBlissA9r2 allows an unprecedented combination of high-end computer graphic at simultaneously extremely low power loss.

The i.MX 6 CPU is available with Solo, DualLite, Quad and QuadPlus in the same housing. Enabling further versions of QBlissA9r2 in differenet performance ranges.

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint