+49(0)711 123722-0
(0)
armStone™MX8MP-V5-LIN
Single Board Computer in PicoITX form factor with NXP i.MX 8M Plus Quad CPU
|
|
For the start of development we recommend: |
| armStoneMX8MP-V5-LIN | ||
| State | Production | |
| CPU | ||
| CPU | NXP i.MX 8M Plus | |
| Core | ARM Cortex-A53 + Cortex-M7 | |
| No of Cores | 4x A53 + M7 | |
| Frequency | 1,8GHz + 800 MHz | |
| GPU | 3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1 | |
| Operating System | ||
| Linux | Yacto (uboot installed) |
|
| Real Time | FreeRTOS | |
| Memory | ||
| Flash | EEPROM | |
| eMMC | 64GB eMMC | |
| RAM | 4GB LPDDR4 | |
| Interfaces | ||
| SD-Card | uSD Slot | |
| Ethernet | 2x 1000 Mbit | |
| USB Host | 4x | |
| USB Device | 1 (USB2.0) | |
| CAN | 2x | |
| UART | 3x | |
| I2C | 4x | |
| SPI | 2x | |
| Audio | I2S | |
| Digital I/O | max. 32 | |
| ADC | 4x | |
| Touch Panel | via I2C | |
| Camera analog/digital | 0/MIPI-CSI | |
| RTC | PCF85263 | |
| additional Interfaces | 4x PWM | |
| Display | ||
| LVDS | 1x 4 lanes | |
| CRT/DVI | 0/ DVI 1080p | |
| MIPI-DSI | 4x lanes | |
| Common | ||
| Supply Voltage | 5V DC/±5% | |
| Power Consumption | 4W typ. | |
| Operating Temperature | 0°C - +70°C | |
| Size | 100x72x15mm (LxBxH) |
|
| Weight | ~60g | |
| Long Term Availability | 2035 |
 |
Starterkit armStone™MX8MP Linux Starterkit with armStone™MX8MP-V4I-LIN, cable kit, antenna, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-LIN |
360,- € | ||
|
Starterkit armStone™MX8MP Windows Starterkit with armStone™MX8MP-V5-LIN, cable kit, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-W |
360,- € |
Software
 |
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Displays
 |
7” LVDS Display with PCAP Touch (long-term available) 7” LVDS LCD Display with PCAP Touch SKU: LCD.7.LVDS.1 |
95,- € | ||
 |
10” LVDS Display with PCAP Touch (long-term available) 10” LVDS LCD Display with PCAP Touch SKU: LCD.10.LVDS.1 |
130,- € | ||
 |
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € |
Kabel
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € | ||
| Backlight Cable Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1). SKU: B.MKAB.35 |
7,- € |
Adapter
 |
Power Adapter To supply armStone™ and PicoCore™ modules with 24V. SKU: ADP-NT24V3 |
40,- € | ||
 |
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € | ||
 |
armStone™ Extension Routes interfaces of the 66pin feature connector to standard connectors. SKU: aStone-ADP-UNI1 |
130,- € |
Workshop
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Sonstiges
 |
Heat Spreader armStoneMX8MP Heat spreader for cooling the armStoneMX8MP. SKU: MHS.AS8MP.1 |
10,- € | ||
 |
Heat Spreader and Heat Sink armStoneMX8MP Heat spreader and heat sink for cooling the armStoneMX8MP. SKU: MHS.AS8MP.2 |
16,- € | ||
 |
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € |
Variants
|
armStoneMX8MP-V2-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M4, 1GB RAM, 4GB eMMC, Gb Ethernet, 1x CAN, I2S, ADC, MIPI-CSI Kamera, 2x LVDS, DVI, 0°C-+70°C, 5V supply, Linux Yocto SKU: armStoneMX8MP-V2-LIN |
Request | ||
|
armStoneMX8MP-V4I-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M7, 2GB RAM, 8GB eMMC, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Kamera, LVDS, DVI, -25°C-+70°C, 5V Supply, Linux Yocto SKU: armStoneMX8MP-V4I-LIN |
Request | ||
|
armStoneMX8MP-V5-W10 NXP i.MX8M Plus QuadLite, 1.8 GHz, 4GB DRAM, 64GB eMMC, 2x Gbit LAN, 2x CAN, ADC, I2S, 4xUSB 2.0, USB 3.0, µSD, LVDS+DSI, HDMI, no PCIe/SIM, no SECO, no WLAN/BT, 0..70°C Windows 10 IoT SKU: aStone8MP-V5-W10 |
Request | ||
|
armStoneMX8MP-V5-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M7, 2GB RAM, 8GB eMMC, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Kamera, LVDS, DVI, -25°C-+70°C, 5V Supply, Linux Yocto SKU: armStoneMX8MP-V5-LIN |
Request | ||
Starterkits
|
Starterkit armStone™MX8MP Linux Starterkit with armStone™MX8MP-V4I-LIN, cable kit, antenna, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-LIN |
360,- € | ||
|
Starterkit armStone™MX8MP Windows Starterkit with armStone™MX8MP-V5-LIN, cable kit, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-W |
360,- € |
For armStoneMX8MP we offer a well-tested software environment. Part of this package is our Linux Yocto release. Announcements about our most recent software package can be found in our support forum:
Yocto Release Y2024.07
For the CPU NXP i.MX8M Plus F&S offers a Yocto based environment. We offer the Linux BSP fsimx8mp-Y2024.07, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
The BSP contains the source code packages of U-Boot (2021.04), Linux kernel (based on 5.15.160) and Yocto (4.0.20 Kirkstone) adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. Last but not least, detailed documents on the hardware are included, as well as the First Steps documentation for an easy start.
F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
➜ More information about the new Yocto release Y2024.07
Development start in under an hour
F&S Development Machine - Fedora 36
For a quick start into development with Linux we provide a VirtualBox-based virtual hard disk VHD for download. The VHD uses Fedora 36as Linux distribution.
With this machine you can start your development in less than an hour.
The machine is free of charge for our customers.
VirtualBox is a powerful product for corporate customers and at the same time the only professional solution which is freely available as Open Source Software under the terms of the GNU General Public License Version 2.
The F&S Development Machine contains pre-installed board support packages for fsimx8mm, fsimx8mn and fsimx8mp (64 bit CPU).
The appropriate F&S toolchain is installed in the VHD, the source code is extracted and ready to use.
Necessary system packages and tools are also already installed.
Furthermore, it contains a configured environment for QT development with cross-compile/debug kit, deployment strategy and demo application.
Note: To download the Development Machine, you must be registered on our website.
➜ More information about the F&S Development Machine in the F&S Support Forum
➜ Download F&S Development Machine - Fedora 36
➜ Quickstart Documentation
armStoneMX8MP - Product Flyer
- Englisch (340 KB, pdf) - 12/04/2023
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
armStoneMX8MP - Hardware
- armStoneMX8MP Hardware Documentation (2 MB, pdf) - 06/11/2024
- armStoneMX8MP 3D Step Model (7.5 MB, zip) - 09/07/2024
- armStoneMX8MP Cooling Solution Documentation (712 KB, pdf) - 14/04/2023
- armStoneMX8MP and Cooling 3D Files (8.1 MB, zip) - 16/08/2022
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
armStoneMX8MP - Linux
- armStoneMX8MP Linux First Steps (1.5 MB, pdf) - 06/09/2024
- GPIO Reference Card (184 KB, pdf) - 17/04/2024
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- F&S Secure Boot (534 KB, pdf) - 19/03/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Application Development with Crank (485 KB, pdf) - 28/07/2022
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- Mono on F&S Boards (2.6 MB, pdf) - 17/11/2023
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
- FreeRTOS on FSiMX8MP Boards (673 KB, pdf) - 02/09/2022
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variants
|
armStoneMX8MP-V2-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M4, 1GB RAM, 4GB eMMC, Gb Ethernet, 1x CAN, I2S, ADC, MIPI-CSI Kamera, 2x LVDS, DVI, 0°C-+70°C, 5V supply, Linux Yocto SKU: armStoneMX8MP-V2-LIN |
Request | ||
|
armStoneMX8MP-V4I-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M7, 2GB RAM, 8GB eMMC, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Kamera, LVDS, DVI, -25°C-+70°C, 5V Supply, Linux Yocto SKU: armStoneMX8MP-V4I-LIN |
Request | ||
|
armStoneMX8MP-V5-W10 NXP i.MX8M Plus QuadLite, 1.8 GHz, 4GB DRAM, 64GB eMMC, 2x Gbit LAN, 2x CAN, ADC, I2S, 4xUSB 2.0, USB 3.0, µSD, LVDS+DSI, HDMI, no PCIe/SIM, no SECO, no WLAN/BT, 0..70°C Windows 10 IoT SKU: aStone8MP-V5-W10 |
Request | ||
|
armStoneMX8MP-V5-LIN NXP i.MX 8M Quad Cortex-A53 + Cortex-M7, 2GB RAM, 8GB eMMC, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Kamera, LVDS, DVI, -25°C-+70°C, 5V Supply, Linux Yocto SKU: armStoneMX8MP-V5-LIN |
Request | ||
Starterkits
|
Starterkit armStone™MX8MP Linux Starterkit with armStone™MX8MP-V4I-LIN, cable kit, antenna, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-LIN |
360,- € | ||
|
Starterkit armStone™MX8MP Windows Starterkit with armStone™MX8MP-V5-LIN, cable kit, power adapter, access data to documentation and software SKU: aStoneMX8MP-SKIT-W |
360,- € |
Link to the Forum
You will always find support in our Forum.
Current Contributions
|
16 Dec, 17:51 |
Repartitioning NAND Flash (via Yocto/ Patch) |
|
12 Dec, 09:21 |
SPIDEV probe function not called |
|
11 Dec, 12:16 |
CANscan: Powerful CAN Bus Testing and Communication Tool with Avalonia UI |
|
10 Dec, 09:13 |
request to introduce a github repo also for the toolchain with corresponding history |
|
05 Dec, 06:29 |
WEC 2013: How to close UDP Ports 137 and 138 / how to disable NetBIOS over TCP/IP |
|
04 Dec, 12:48 |
New i.MX8MP GPU Driver |
|
04 Dec, 09:32 |
Prevent efusA9 with WEC 2013 from sending Device Info |
|
03 Dec, 08:58 |
Change to winter time |
|
02 Dec, 15:12 |
Question: eMMC vs NAND storage |
|
30 Nov, 11:59 |
armStone A5 in a Plexlog Datalogger |
