phonenumber +49(0)711 123722-0
|
DE EN

SMARC™MX8MP

COM in SMARC Form Factor with NXP i.MX 8M Plus

For the start of development, we recommend

Starterkit SMARC™MX8MP Linux
  360,- €
Tax not included

Evaluation kit für FS SMARC™MX8MP with base board, 7" display with PCAP touch, cable kit, access data for documentation and software

Key features for the F&S SMARC module FSSM8MP:
  • Integrated AI and machine learning accelerator for edge computing.
  • Dual-camera support and ISP (Image Signal Processor) for advanced image processing.
  • Supports 1080p video encode/decode and 3D graphics acceleration.
  • 2x Gigabit Ethernet, Wi-Fi 5, and Bluetooth 5.0, along with USB 3.0 and PCIe interfaces.
  • Support for LVDS or MIPI-DSI displays and HDMI monitors.
  • Operating temperature range from -40°C to +85°C for industrial use.
  • TrustZone, Secure Boot and Secure Element for enhanced security.


SMARC™MX8MP-V3-LIN SMARC™MX8MP-V4-LIN SMARC™MX8MP-V4I-LIN
State Production Production Production
CPU - - -
CPU NXP i.MX 8M Plus NXP i.MX 8M Plus NXP i.MX 8M Plus
Core ARM Cortex-A53
Cortex-M7
ARM Cortex-A53
Cortex-M7
HIFI-4 DSP, NPU
ARM Cortex-A53
Cortex-M7
HIFI-4 DSP, NPU
No of Cores 4x A53 + 1x M7 4x A53 + 1x M7 4x A53 + 1x M7
Frequency 1.8GHz + 800MHz 1.6GHz + 800MHz 1.6GHz + 800MHz
L2-Cache 512KB 512KB 512KB
GPU 2D, 3D: ES 3.1/3.0, CL™ 1.2, VG™ 1.1 2D, 3D: ES 3.1/3.0, CL™ 1.2, VG™ 1.1 2D, 3D: ES 3.1/3.0, CL™ 1.2, VG™ 1.1
VPU - 1080p60, h.265/4, VP9, VP8, Video Encode: 1080p60, h.265/4 1080p60, h.265/4, VP9, VP8, Video Encode: 1080p60, h.265/4
Video - NPU | Machine Learning NPU | Machine Learning
Operating System - - -
Linux Yocto
(uboot installed)
Yocto
(uboot installed)
Yocto
(uboot installed)
Windows - 10 IoT Enterprise
(UEFI installed)
-
Real Time FreeRTOS FreeRTOS FreeRTOS
Memory - - -
Flash 64k EEPROM 64k EEPROM 64k EEPROM
eMMC 8GB 32GB 32GB
RAM 1GB LPDDR4 2GB LPDDR4 2GB LPDDR4
Interfaces - - -
SD-Card 1x SDIO 1x SDIO 1x SDIO
Ethernet 1x Gbit 2x Gbit 2x Gbit
WiFi - IEEE 802.11 ac/a/b/g/n (2.4/ 5GHz) IEEE 802.11 ac/a/b/g/n (2.4/ 5GHz)
BT - 5.0 LE 5.0 LE
USB Host 1x 4x 4x
USB Device 1x OTG 1x OTG 1x OTG
CAN 2x 2x 2x
UART 4x 4x 4x
I2C 5x 5x 5x
SPI 2x 2x 2x
Audio 2x I2S 2x I2S 2x I2S
Digital I/O x x x
Touch Panel via I2C or USB - -
Camera analog/digital 2x MIPI-CSI 2x MIPI-CSI 2x MIPI-CSI
PCIe 1x 1x 1x
RTC PCF85263ATL PCF85263ATL PCF85263ATL
additional Interfaces - - -
Display - - -
LVDS 2x 24bit 2x 24bit 2x 24bit
CRT/DVI 0/DVI (4k) 0/DVI (4k) 0/DVI (4k)
MIPI-DSI 4 lanes 4 lanes 4 lanes
Common - - -
Supply Voltage 5V DC/±5% 5V DC/±5% 5V DC/±5%
Power Consumption 4 Watt 4 Watt 4 Watt
Operating Temperature 0°C - + 70°C 0°C - + 70°C -25°C - + 85°C
Size 82x50mm 82x50mm 82x50mm
Weight ~20g ~20g ~20g
Long Term Availability 2036 2036 2036
SMARC™MX8MP-V3-LIN SMARC™MX8MP-V4-LIN SMARC™MX8MP-V4I-LIN

FSSMMX8MP FSSMBB TOP Starterkit SMARC™MX8MP Linux
Evaluation kit für FS SMARC™MX8MP with base board, 7" display with PCAP touch, cable kit, access data for documentation and software
SKU: FSSM8MP-SKIT-LIN
360,- €
 

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS
500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays and Display Kits

LCD 7 LVDS 1 front web 7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1
95,- €
 
LCD 10 LVDS 1 front web 10” LVDS Display with PCAP Touch (long-term available)
10” LVDS LCD Display with PCAP Touch
SKU: LCD.10.LVDS.1
130,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 

Cable

B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44
22,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35
7,- €
 
B.MKAB47 Capacitive Touch Cable
6-pin cable with matching connector for connecting an I2C touch to F&S boards
SKU: B.MKAB.47
10,- €
 

Adapter

ADP NT24V2 OBLIQUE TOP Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3
40,- €
 

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP
500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
3,- €
 
B.CON.MXM3.1 MXM-3 Plug Connector
This connector enables the contact of various SMARC modules via the gold finger contacts of the assembly.
SKU: B.CON.MXM3.1
Request  
MHS.SMARC.1 Board Oblique Heat Sink SMARC
Heat Sink for cooling SMARC Boards.
SKU: MHS.SMARC.1
Request  
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 

Variants

FSSMMX8MP TOP SMARC™MX8MP-V3-LIN
NXP i.MX8M Plus Quad Lite 1.8GHz, 1GB LPDDR4, 8GB eMMC, 2x LVDS, RTC, 1x Gbit LAN, 64kB EEPROM, no Security, no USB Hub, no WLAN, 0...+70°C
SKU: FSSM8MP-V3-LIN
Request  
FSSMMX8MP TOP SMARC™MX8MP-V4-LIN
NXP i.MX8M Plus Quad Lite 1.8GHz, 2GB LPDDR4, 32GB eMMC, 2xLVDS, SECO, RTC, 2x Gbit LAN, USB Hub, WLAN/BT 2.4/5GHz, 64kB EEPROM, 0...+70°C
SKU: FSSM8MP-V4-LIN
Request  
FSSMMX8MP TOP SMARC™MX8MP-V4I-LIN
NXP i.MX8M Plus Quad 1.6GHz VPU NPU ISP, 2GB LPDDR4, 32GB eMMC, 2xLVDS, SECO, RTC, 2x Gbit LAN, USB Hub, WLAN/BT 2.4/5GHz, 64kB EEPROM, -25...+85°C
SKU: FSSM8MP-V4I-LIN
Request  

Starterkit

FSSMMX8MP FSSMBB TOP Starterkit SMARC™MX8MP Linux
Evaluation kit für FS SMARC™MX8MP with base board, 7" display with PCAP touch, cable kit, access data for documentation and software
SKU: FSSM8MP-SKIT-LIN
360,- €
 

Yocto Release Y2024.07

For the CPU NXP i.MX8M Plus F&S offers a Yocto based environment. We offer the Linux BSP fsimx8mp-Y2024.07, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

The BSP contains the source code packages of U-Boot (2021.04), Linux kernel (based on 5.15.160) and Yocto (4.0.20 Kirkstone) adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. Last but not least, detailed documents on the hardware are included, as well as the First Steps documentation for an easy start.

F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Yocto release Y2024.07

Development start in under an hour
F&S Development Machine - Fedora 36


For a quick start into development with Linux we provide a VirtualBox-based virtual hard disk VHD for download. The VHD uses Fedora 36as Linux distribution.

With this machine you can start your development in less than an hour.

The machine is free of charge for our customers.

login screen

VirtualBox is a powerful product for corporate customers and at the same time the only professional solution which is freely available as Open Source Software under the terms of the GNU General Public License Version 2.
The F&S Development Machine contains pre-installed board support packages for fsimx8mm, fsimx8mn and fsimx8mp (64 bit CPU).
The appropriate F&S toolchain is installed in the VHD, the source code is extracted and ready to use.
Necessary system packages and tools are also already installed.
Furthermore, it contains a configured environment for QT development with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Note: To download the Development Machine, you must be registered on our website.

➜ More information about the F&S Development Machine in the F&S Support Forum
Download F&S Development Machine - Fedora 36
Quickstart Documentation

Windows 10/11 IoT Enterprise

Windows IoT Enterprise ist ein vollwertiges Windows das alle Arten von Windows Programme unterstützt. Gleichzeitig wurde die Speicheranforderungen (RAM 2FG und Flash 16GB) auf ein Minimum reduziert. Die Performance auf einer NXP CPU (i.MX8M Plus oder i.MX93) ist für viele klassische WinForms,  WPF oder MFC Applikationen ausreichend. Der Microsoft Edge Browser (basiert auf Chromium)  läuft flüssig und stellt auch Videos problemlos dar.


WinIoTVideo

Langfristige Betriebssystemunterstützung

Ein besonders Merkmal von Windows IoT Enterprise ist die langfristige Betriebssystemunterstützung (LTSC). Diese Version bietet eine optionale Unterstützung von bis zu 10 Jahren, was eine stabile und verlässliche Plattform für Ihre Geräte gewährleistet.

Großes Ökosystem

Mit Windows IoT Enterprise haben Sie Zugriff auf Tausende von bestehenden Apps und können ein riesiges Ökosystem nutzen. Verwenden Sie Ihre bestehenden C# .Net-Anwendungen und entwicklen Sie sie weiter.

Sicherheit und Schutz

Nutzen Sie vorhandene, unternehmensgerechte Geräteverwaltungs-Tools, um Ihre Geräte auf dem neuesten Stand zu halten und zuverlässig zu betreiben. Funktionen wie Secure Boot und Over-the-Air-Updates sind integriert, um Ihre Geräte zu schützen und sicherzustellen, dass sie immer auf dem neuesten Stand sind.

Multi-Cloud-Konnektivität

Windows IoT Enterprise ermöglicht Multi-Cloud-Konnektivität, was eine nahtlose Integration und Verwaltung Ihrer Geräte in verschiedenen Cloud-Umgebungen erlaubt.

Kontaktieren Sie uns

Für weitere Informationen zu Funktionen und Verfügbarkeit von Windows IoT Enterprise auf F&S Modulen stehen wir Ihnen gerne zur Verfügung.(Forum)

FS Forum WinIOT

FSSM8MP - Product Flyer

FSSM8MP - Hardware

FSSM8MP - Linux

Variants

FSSMMX8MP TOP SMARC™MX8MP-V3-LIN
NXP i.MX8M Plus Quad Lite 1.8GHz, 1GB LPDDR4, 8GB eMMC, 2x LVDS, RTC, 1x Gbit LAN, 64kB EEPROM, no Security, no USB Hub, no WLAN, 0...+70°C
SKU: FSSM8MP-V3-LIN
Request  
FSSMMX8MP TOP SMARC™MX8MP-V4-LIN
NXP i.MX8M Plus Quad Lite 1.8GHz, 2GB LPDDR4, 32GB eMMC, 2xLVDS, SECO, RTC, 2x Gbit LAN, USB Hub, WLAN/BT 2.4/5GHz, 64kB EEPROM, 0...+70°C
SKU: FSSM8MP-V4-LIN
Request  
FSSMMX8MP TOP SMARC™MX8MP-V4I-LIN
NXP i.MX8M Plus Quad 1.6GHz VPU NPU ISP, 2GB LPDDR4, 32GB eMMC, 2xLVDS, SECO, RTC, 2x Gbit LAN, USB Hub, WLAN/BT 2.4/5GHz, 64kB EEPROM, -25...+85°C
SKU: FSSM8MP-V4I-LIN
Request  

Starterkit

FSSMMX8MP FSSMBB TOP Starterkit SMARC™MX8MP Linux
Evaluation kit für FS SMARC™MX8MP with base board, 7" display with PCAP touch, cable kit, access data for documentation and software
SKU: FSSM8MP-SKIT-LIN
360,- €
 

 

SMARC ...for complex requirements

The SMARC® ("Smart Mobility ARChitecture") is a versatile computer with a small form factor and a module definition aimed at applications that require low power consumption, low cost and high performance. Two module sizes are defined: 82mm x 50mm and 82mm x 80mm. The module boards have 314 edge fingers that mate with a right-angle 314-pin connector with 0.5mm pitch (the connector is sometimes referred to as a 321-pin connector, but 7 pins are lost in the key).

The modules are used with application-specific carrier boards that implement other functions such as audio CODECs, touch controllers, wireless devices, etc.

The modular approach enables scalability, fast time-to-market and upgradeability at low cost, low power consumption and small size.

Asymmetric multiprocessing

The SMARC™MX8M is based on an NXP i.MX 8MP application processor with ARM Cortex-A53 and ARM Cortex-M7. The advantage of this asymmetric processor architecture is the strict separation of real-time relevant tasks - such as a control algorithm - from the rest of the system.

More information about the NXP i.MX 8MP application processor

 

F&S Elektronik Systeme has been developing and producing embedded boards in Stuttgart for more than 25 years and offers a wide range of modules with NXP CPUs (i.MX 6, i.MX 8 and i.MX9) in various form factors (plug-in modules with connectors or with finger contacts as well as SBC solutions in PicoITX).

This powerful module is particularly suitable for complex multimedia tasks and in industrial and medical technology.

Numerous interfaces

The SMARC™MX8MP is equipped with up to 8GByte LPDDR4 and up to 64GB eMMC.

Other interfaces of the SMARC™MX8MP are WLAN (IEEE 802.11a/b/g/n/ac), BT 5, 2x Gigabit Ethernet, SD card, 4x USB host, USB device OTG, 2x CAN, 4x serial, 5x I²C, 2x SPI, audio (I2S), MIPI-CSI camera and PCIe.

2x LVDS interfaces (24bit) and DVI up to a resolution of 4K are available for display control.

A customised Linux Yocto is available as the operating system.