+49(0)711 123722-0
(0)
Starterkit 2 efus™A9 Windows
|
|
|
Scope of Delivery
efus™A9-V2-W13/-WEC7/-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Camera, Touch, 2x LVDS, RGB, DVI, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013 / 7 or Linux Buildroot / Yocto
SKU: EFUSA9-V2-W13/-WEC7/-LIN
efus™ Base Board
Offers connection options for 2x Ethernet, 3x USB Host, USB Device (OTG), micro SD Card, SD Card, 4x Serial, I²C, SPI, 2x PWM, Audio (Line In, Line Out, Mic), digital/analog Camera, DVI/DisplayPort, mini PCIe and SATA.
SKU: EFUS-SINTF-FERT1B
Produkt SINTF-CABKIT nicht vorhanden
Software
 |
Software .NET Drivers Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++. SKU: WCE-DOTNET |
500,- € | ||
|
UpDate Software This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card. SKU: WCE-UPDATE |
500,- € | ||
|
Boot Screen Shows the device's user a starting procedure while booting (BMP File). SKU: WCE-BOOTSCREEN |
500,- € | ||
|
Custom Kernel Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added. SKU: WCE-CUSTIMAGE |
500,- € | ||
|
Failsafe Flash Filesystem (F3S) The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing. SKU: WCE-F3S |
1,000,- € | ||
|
Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows |
500,- € |
Displays and Display Kit
 |
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | ||
 |
7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18 |
150,- € | ||
 |
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Touch Kits
 |
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € | ||
 |
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € |
Cables
 |
50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41 |
10,- € | ||
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
 |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
 |
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
 |
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € | ||
 |
Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1 |
50,- € | ||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € |
Plug Connector
 |
MXM-2 Connector For connecting efus™- or QBliss-modules via goldfinger contacts. SKU: B.MST.2R230PL.1 |
43,- € |
Workshop
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5 |
36,- € |
