Starterkit efus™A9 Linux

Scope of Delivery

efus™A9-V3-W13/-WEC7/-LIN
NXP i.MX 6DualLite Cortex-A9, 512MB RAM, 256MB Flash, min. 4GB eMMC, Gb Ethernet, 2x CAN, Audio, PCIe, MIPI-CSI Camera, Touch, 2x LVDS, RGB, DVI, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013/ 7 or Linux Buildroot/ Yocto
SKU: EFUSA9-V3-W13/-WEC7/-LIN

efus™ Base Board
Offers connection options for 2x Ethernet, 3x USB Host, USB Device (OTG), micro SD Card, SD Card, 4x Serial, I²C, SPI, 2x PWM, Audio (Line In, Line Out, Mic), digital/analog Camera, DVI/DisplayPort, mini PCIe and SATA.
SKU: EFUS-SINTF-FERT1B

Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT

Produkt SINTF-CABKIT nicht vorhanden

Software

	Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS	500,- €
	Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW	700,- €
	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €

Displays and Display Kit

	7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15	120,- €
	7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18	150,- €
	Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB	210,- €

Touch Kits

	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2	35,- €

Cables

	50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41	10,- €
	LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53	22,- €

Adapters

	I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C	80,- €
	MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1	100,- €
	armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI	50,- €
	Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1	50,- €
	mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN	40,- €

Plug Connector

MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1

43,- €

Workshops

	Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1	Request
	Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP	500,- €

Other Accessories

	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5	36,- €