Starterkit PicoCore™MX7ULP Linux

PCore™MX7ULP-V4-LIN
NXP i.MX 7ULP ARM Cortex-A7 + Cortex-M4 1GB RAM, 1MB SPI Flash, 4GB eMMC, Audio, WLAN, BT, MIPI-DSI, 0°C - +70°C, 5V Versorgung, Linux Yocto
SKU: PCoreMX7ULP-V4-LIN

PicoCore™MX7ULP Base Board
Offers connection options for USB 2.0 (OTG), SD Card, 6x Serial, 4x I²C, SPI, Audio (In/ Out/ Mic/ Headphone) and MIPI-DSI.
SKU: PCoreMX7ULP-BB

Produkt SINTF-CABKIT nicht vorhanden

3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22

30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55

MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1

Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6

Software

	Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW	700,- €
	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €

Displays

3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22

80,- €

Touch Kit

Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH

35,- €

Cables

	LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53	22,- €
	30poles Film Cable Film cable, 30pol., 0,5mm, l=100mm for displays To connect our B.LCD.22 display via ADP-MIPI2MIPI1 SKU: B.MKAB.55	10,- €

Adapters

	MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1	25,- €
	MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B). SKU: ADP-MIPI2MIPI1	25,- €

Plug Connector

PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3

20,- €

Workshop

Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1

Request

Other Accessories

	SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22	70,- €
	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6	3,- €