Starterkit PicoCore™MX8MM Linux

PicoCore™MX8MM-V14I-LIN
NXP i.MX 8M Mini ARM Quad Cortex-A53 + Cortex-M4, 2GB RAM, 16GB eMMC, Gigabit Ethernet, Audio Codec, WLAN, BT, PCIe, MIPI-CSI, LVDS, CAN, SE050, -25°C - +85°C, Linux, FreeRTOS
SKU: PCore8MMr2-V14I-LI

PicoCore™100 Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT1B

Produkt B.LCD.19 nicht vorhanden

Produkt B.MKAB.51 nicht vorhanden

Produkt SINTF-CABKIT nicht vorhanden

Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6

Software

	Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS	500,- €
	Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW	700,- €
	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €

Displays

3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22

80,- €

Touch Kits

	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C	Request

Cables

	LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53	22,- €
	30poles Film Cable Film cable, 30pol., 0,5mm, l=100mm for displays To connect our B.LCD.22 display via ADP-MIPI2MIPI1 SKU: B.MKAB.55	10,- €

Adapters

	MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1	100,- €
	MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1	25,- €
	mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN	40,- €
	Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1	30,- €
	MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B). SKU: ADP-MIPI2MIPI1	25,- €

Plug Connector

PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R100PS.3

30,- €

Workshops

	Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1	Request
	Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP	500,- €

Other Accessories

	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22	70,- €
	Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6	3,- €