phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoCore™MX7ULP Linux

 

Starterkit PicoCore™MX7ULP Linux
  340,- €
Tax not included

PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software

PicoCoreMX7ULP TOP 450px
PCore™MX7ULP-V4-LIN
NXP i.MX 7ULP ARM Cortex-A7 + Cortex-M4 1GB RAM, 1MB SPI Flash, 4GB eMMC, Audio, WLAN, BT, MIPI-DSI, 0°C - +70°C, 5V Versorgung, Linux Yocto
SKU: PCoreMX7ULP-V4-LIN

PCoreMX7ULP BB TOP
PicoCore™MX7ULP Base Board
Offers connection options for USB 2.0 (OTG), SD Card, 6x Serial, 4x I²C, SPI, Audio (In/ Out/ Mic/ Headphone) and MIPI-DSI.
SKU: PCoreMX7ULP-BB

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

BLCD22front
3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22

B.MKAB.23
30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55

ADP MIPI2MIPI1
MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1

bant6
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 

Displays

B.LCD.19 7" LVDS Display with PCAP Touch
7" TFT LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19
200,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cables

B.MKAB51 LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
SKU: B.MKAB.51
50,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53
22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55
10,- €
 

Adapters

ADPNT24V2 und Kabel Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V2
40,- €
 
ADP MIPI2LVDS1 OBLIQUE TOP MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1
25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1
25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3
20,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22
70,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3
10,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
4.50 €