phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

efus™MX93-SKIT-LIN

 

Starterkit efus™MX93 Linux
  360,- €
Tax not included

Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.

efusMX93 FERT4 BOT
efus™MX93-V4I-LIN
NXP i.MX93 Dual Full 1.7GHz, 2GB LPDDR4, 64GB eMMC, LVDS JILI30, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, WLAN 802.11ac, BT 5, -25...+85°C
SKU: efusMX93-V4I-LIN

EFUS SINTF FERT1B TOP REV140
efus™ Base Board
Offers connection options for 2x Ethernet, 3x USB Host, USB Device (OTG), micro SD Card, SD Card, 4x Serial, I²C, SPI, 2x PWM, Audio (Line In, Line Out, Mic), digital/analog Camera, DVI/DisplayPort, mini PCIe and SATA.
SKU: EFUS-SINTF-FERT1B

LCD 7 LVDS 1 front web
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1

B.MKAB
LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44


Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35

 

starterkit cable kit
Cable Kit2

SKU: SINTF-CABKIT2

bant6
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6

Software

software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 

Displays and Displaykits

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 
LCD 7 LVDS 1 front web 7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1		 95,- €
 
LCD 10 LVDS 1 front web 10” LVDS Display with PCAP Touch (long-term available)
10” LVDS LCD Display with PCAP Touch
SKU: LCD.10.LVDS.1		 130,- €
 

Touch-Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2		 35,- €
 

Cables

B.MKAB47 Capacitive Touch Cable
6-pin cable with matching connector for connecting an I2C touch to F&S boards
SKU: B.MKAB.47		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35		 7,- €
 

Adapter

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 30,- €
 
MIPI-DSI to DVI Adapter
Enables conversion from MIPI-DSI to DVI.
SKU: ADP-MIPI2DVI1		 Request  

Plug Connectors

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
B.MST.VR.5 efus™ Latch
Allows to mount efus™ modules on the base board.
SKU: B.MST.VR.5		 36,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
MHS.PC100.1 Board Oblique Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1		 10,- €
 
B.MKUE.5 ASSMANN VR2032N Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2		 12,- €
 

Variants

efusMX93 FERT4 TOP efus™MX93-V1-LIN
NXP i.MX93 Dual Full 1.7GHz, 1GB LPDDR4, 8GB eMMC, LVDS MXM, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, noWLAN/BT, 0°C...+70°C
SKU: efusMX93-V1-LIN		 Request  
efusMX93 FERT4 BOT efus™MX93-V4I-LIN
NXP i.MX93 Dual Full 1.7GHz, 2GB LPDDR4, 64GB eMMC, LVDS JILI30, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, WLAN 802.11ac, BT 5, -25...+85°C
SKU: efusMX93-V4I-LIN		 Request  

Starterkit

efusMX8X Starterkit OBLIQUE TOP 750px Starterkit efus™MX93 Linux
Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: efusMX93-SKIT-LIN		 360,- €
 

Yocto Release Y2024.09

For the CPU NXP i.MX93 F&S offers a Yocto based environment. We offer the Linux BSP fsimx93-Y2024.09-pre, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

The BSP is based on the following source code packages:

  • U-Boot: 2024.04
  • Linux-Kernel:  6.6.48
  • Yocto: 5.0.3 Scarthgap

Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. 

F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Yocto release

Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 36

Fedora 36 is a VirtualBox Appliance based on Fedora 36, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.

login screen

VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for:

  • fsimx8mp-Y2023.09 (/home/developer/fsimx8mp-Y2023.09)
  • fsimx8mm-Y2023.10 (/home/developer/fsimx8mm-Y2023.10)
  • fsimx8mm-B2023.11 (/home/developer/fsimx8mm-B2023.11)
  • fsimx8mn-Y2024.02 (/home/developer/fsimx8mn-B2024.02)

More BSP will be included. Please see our support forum for updates.

➜ Support Forum - Fedora 27

The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.

Besides that, it contains a configured environment for Qt development (Qt) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Please notice that it is required to register on our website to download this machine.

➜ Download F&S Development Machine - Fedora 26
➜ Quickstart Dokumentation

efusMX93 - Product Flyer

efusMX93 - Hardware

efusMX93 - Linux

Variants

efusMX93 FERT4 TOP efus™MX93-V1-LIN
NXP i.MX93 Dual Full 1.7GHz, 1GB LPDDR4, 8GB eMMC, LVDS MXM, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, noWLAN/BT, 0°C...+70°C
SKU: efusMX93-V1-LIN		 Request  
efusMX93 FERT4 BOT efus™MX93-V4I-LIN
NXP i.MX93 Dual Full 1.7GHz, 2GB LPDDR4, 64GB eMMC, LVDS JILI30, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, WLAN 802.11ac, BT 5, -25...+85°C
SKU: efusMX93-V4I-LIN		 Request  

Starterkit

efusMX8X Starterkit OBLIQUE TOP 750px Starterkit efus™MX93 Linux
Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: efusMX93-SKIT-LIN		 360,- €
 

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint