phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

efus™MX93-V1-LIN

Computer On Module with NXP i.MX 93 Processor

 

efus™MX93-V1-LIN  
State Q1/2025  
CPU  
CPU NXP i.MX 93  
Core ARM Cortex-A55
Cortex-M33
NPU		  
No of Cores 2x A55 + M33 + NPU  
Frequency 1.7GHz + 250MHz  
L2-Cache 2x64kB L2 + 256kB L3  
GPU PXP  
VPU -  
Operating System  
Linux Yocto
(uboot installed)		  
Real Time FreeRTOS  
Memory  
Flash EEPROM  
eMMC 8GB  
RAM 1GB LPDDR4  
Interfaces  
SD-Card 2x SDIO  
Ethernet 2x 100/1000Mb  
USB Host 1x USB 2.0  
USB Device 1x USB 2.0 OTG  
CAN 1x CAN-FD  
UART 7x  
I2C 6x  
SPI 2x  
Audio I2S  
ADC 4x  
Touch Panel via I2C or USB  
Camera analog/digital MIPI-CSI
(2 lanes)		  
RTC PCF85263ATL  
Display  
RGB 18 Bit  
LVDS 1x 4 Lanes  
Common  
Supply Voltage +5VDC/ ±5%  
Power Consumption 3W typ.  
Operating Temperature 0°C - +70°C  
Size 47x62.1x11mm  
Weight ~15g  
Long Term Availability 2038  


efus™MX93-V1-LIN efus™MX93-V4I-LIN
State Q1/2025 Q1/2025
CPU - -
CPU NXP i.MX 93 NXP i.MX 93
Core ARM Cortex-A55
Cortex-M33
NPU		 ARM Cortex-A55
Cortex-M33
NPU
No of Cores 2x A55 + M33 + NPU 2x A55 + M33 + NPU
Frequency 1.7GHz + 250MHz 1.7GHz + 250MHz
L2-Cache 2x64kB L2 + 256kB L3 2x64kB L2 + 256kB L3
GPU PXP PXP
VPU - -
Operating System - -
Linux Yocto
(uboot installed)		 Yocto
(uboot installed)
Real Time FreeRTOS FreeRTOS
Memory - -
Flash EEPROM EEPROM
eMMC 8GB 64GB
RAM 1GB LPDDR4 2GB LPDDR4
Interfaces - -
SD-Card 2x SDIO 1x SDIO
Ethernet 2x 100/1000Mb 2x 100/1000Mb
WiFi - 802.11 ac/a/b/g/n
(2.4/ 5GHz)
BT - 5.3
USB Host 1x USB 2.0 1x USB 2.0
USB Device 1x USB 2.0 OTG 1x USB 2.0 OTG
CAN 1x CAN-FD 1x CAN-FD
UART 7x 7x
I2C 6x 6x
SPI 2x 2x
Audio I2S I2S
ADC 4x 4x
Touch Panel via I2C or USB via I2C or USB
Camera analog/digital MIPI-CSI
(2 lanes)		 MIPI-CSI
(2 lanes)
RTC PCF85263ATL PCF85263ATL
Display - -
RGB 18 Bit 18 Bit
LVDS 1x 4 Lanes 1x 4 Lanes
Common - -
Supply Voltage +5VDC/ ±5% +5VDC/ ±5%
Power Consumption 3W typ. 3W typ.
Operating Temperature 0°C - +70°C -25°C - +85°C
Size 47x62.1x11mm 47x62.1x11mm
Weight ~15g ~15g
Long Term Availability 2038 2038
efus™MX93-V1-LIN efus™MX93-V4I-LIN

efusMX8X Starterkit OBLIQUE TOP 750px Starterkit efus™MX93 Linux
Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: efusMX93-SKIT-LIN		 360,- €
 

Software

software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 

Displays and Displaykits

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 
LCD 7 LVDS 1 front web 7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1		 95,- €
 
LCD 10 LVDS 1 front web 10” LVDS Display with PCAP Touch (long-term available)
10” LVDS LCD Display with PCAP Touch
SKU: LCD.10.LVDS.1		 130,- €
 

Touch-Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2		 35,- €
 

Cables

B.MKAB47 Capacitive Touch Cable
6-pin cable with matching connector for connecting an I2C touch to F&S boards
SKU: B.MKAB.47		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35		 7,- €
 

Adapter

ADP-MIPICAM1 MIPI Camera Kit
Adapter module with camera
SKU: ADP-MIPICAM1		 100,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 30,- €
 
MIPI-DSI to DVI Adapter
Enables conversion from MIPI-DSI to DVI.
SKU: ADP-MIPI2DVI1		 Request  

Plug Connectors

Foxconn MXM 2 Connector MXM-2 Connector
For connecting efus™- or QBliss-modules via goldfinger contacts.
SKU: B.MST.2R230PL.1		 43,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
B.MST.VR.5 efus™ Latch
Allows to mount efus™ modules on the base board.
SKU: B.MST.VR.5		 36,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
MHS.PC100.1 Board Oblique Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1		 10,- €
 
B.MKUE.5 ASSMANN VR2032N Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2		 12,- €
 

Variants

efusMX93 FERT4 TOP efus™MX93-V1-LIN
NXP i.MX93 Dual Full 1.7GHz, 1GB LPDDR4, 8GB eMMC, LVDS MXM, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, noWLAN/BT, 0°C...+70°C
SKU: efusMX93-V1-LIN		 Request  
efusMX93 FERT4 BOT efus™MX93-V4I-LIN
NXP i.MX93 Dual Full 1.7GHz, 2GB LPDDR4, 64GB eMMC, LVDS JILI30, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, WLAN 802.11ac, BT 5, -25...+85°C
SKU: efusMX93-V4I-LIN		 Request  

Starterkit

efusMX8X Starterkit OBLIQUE TOP 750px Starterkit efus™MX93 Linux
Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: efusMX93-SKIT-LIN		 360,- €
 

Yocto Release Y2024.09

For the CPU NXP i.MX93 F&S offers a Yocto based environment. We offer the Linux BSP fsimx93-Y2024.09-pre, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

The BSP is based on the following source code packages:

  • U-Boot: 2024.04
  • Linux-Kernel:  6.6.48
  • Yocto: 5.0.3 Scarthgap

Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. 

F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Yocto release

Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 36

Fedora 36 is a VirtualBox Appliance based on Fedora 36, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.

login screen

VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for:

  • fsimx8mp-Y2023.09 (/home/developer/fsimx8mp-Y2023.09)
  • fsimx8mm-Y2023.10 (/home/developer/fsimx8mm-Y2023.10)
  • fsimx8mm-B2023.11 (/home/developer/fsimx8mm-B2023.11)
  • fsimx8mn-Y2024.02 (/home/developer/fsimx8mn-B2024.02)

More BSP will be included. Please see our support forum for updates.

➜ Support Forum - Fedora 27

The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.

Besides that, it contains a configured environment for Qt development (Qt) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Please notice that it is required to register on our website to download this machine.

➜ Download F&S Development Machine - Fedora 26
➜ Quickstart Dokumentation

efusMX93 - Product Flyer

efusMX93 - Hardware

efusMX93 - Linux

Variants

efusMX93 FERT4 TOP efus™MX93-V1-LIN
NXP i.MX93 Dual Full 1.7GHz, 1GB LPDDR4, 8GB eMMC, LVDS MXM, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, noWLAN/BT, 0°C...+70°C
SKU: efusMX93-V1-LIN		 Request  
efusMX93 FERT4 BOT efus™MX93-V4I-LIN
NXP i.MX93 Dual Full 1.7GHz, 2GB LPDDR4, 64GB eMMC, LVDS JILI30, RGB, RTC, 2x Gbit LAN Phy, 64kB EEPROM, WLAN 802.11ac, BT 5, -25...+85°C
SKU: efusMX93-V4I-LIN		 Request  

Starterkit

efusMX8X Starterkit OBLIQUE TOP 750px Starterkit efus™MX93 Linux
Evaluation kit for efus™MX93 with efus™ module, carrier board, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: efusMX93-SKIT-LIN		 360,- €
 

Easy, Functional.. ..Universal, Small

The efus™MX93 is another compact and powerful module in the efus™ form factor.
It is ideal for secure cloud connectivity, industrial automation and control, HMI, robotics, building control, display audio, infotainment and telematics applications.

Simple baseboard

Together with a simple baseboard (EasyLayout), the efus™ standard, which measures just 47 x 62 mm, also fits into compact housings.

NXP i.MX 93

The i.MX 93 extends the scalable product range of the i.MX series. The i.MX 93 with ARM Cortex-A55 and -M33 contains modern subsystems and architectures and offers a high level of integration capability for graphics, video, image processing and audio. It is the ideal partner when security and energy efficiency are paramount.

➜ More information about the NXP i.MX 93 application processor

 Long-term availability until 2038

Another feature of the NXP i.MX 93 is its long-term availability until at least 2038.
The efus™MX93 module has LPDDR4 32-bit RAM and up to 64 GB eMMC memory is also available.

  

Numerous interfaces

The module offers a wide range of interfaces, including

SD card
2x Gbit Ethernet
4x serial interfaces
USB 3.0 Host/2.0 Device
2x CAN
6x I²C
8x SPI
I2S Audio
MIPI-CSI camera
WLAN and BT are available for wireless communication.

LCD TFTs can be connected via RGB or LVDSI. Touch functions are available externally via I²C.

Operating system support
The customized operating system (Linux Yocto) supports all interfaces and thus enables simple software development, even without extensive hardware knowledge.

For an easy start of development, we offer a starter kit with display.

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint