+49(0)711 123722-0
(0)
PicoCore™MX6UL100-V3I-LIN
Computer On Module with NXP i.MX 6ULL CPU
|
|
For the start of developement, we recommend |
| PicoCore™MX6UL100-V3I-LIN | ||
| State | Production | |
| CPU | ||
| CPU | NXP i.MX 6ULL | |
| Core | ARM Cortex-A7 | |
| No of Cores | 1 | |
| Frequency | 800 MHz | |
| L2-Cache | 128KB | |
| Operating System | ||
| Linux | Buildroot/ Yocto (uboot installed) |
|
| Memory | ||
| Flash | 512MB SLC NAND | |
| eMMC | max. 64GB | |
| RAM | 512MB DDR3L | |
| Interfaces | ||
| SD-Card | 1x external | |
| Ethernet | 2x 100 Mb | |
| USB Host | 1x 2.0 | |
| USB Device | 1x OTG 2.0 | |
| CAN | max. 2x | |
| UART | max. 4x | |
| I2C | max. 4x | |
| SPI | max. 2x | |
| Audio | Line In/ Out/ Mic/ Headphone |
|
| Touch Panel | analog resistive and PCAP Touch ext. via I2C | |
| RTC | external IC | |
| additional Interfaces | max. 4x PWM, SPDIF, ESAI, SAI, SSI |
|
| Display | ||
| LVDS | 1x 4 Lanes | |
| Common | ||
| Supply Voltage | +3.8V bis 5.5VDC | |
| Power Consumption | 2W typ. | |
| Operating Temperature | -20°C - +85°C | |
| Size | 35x40mm (LxW) |
|
| Weight | ~10g | |
| Long Term Availability | 2031 |
| Starterkit PicoCore™MX6UL100 Linux PicoCore™MX6UL-V4-LIN, Baseboard, 7" LVDS Display, cable kit, access data to documentation and software SKU: PCoreMX6UL100-SKIT-LIN |
360,- € | |||
| RGB Starterkit PicoCore™MX6UL100 Linux PicoCore™MX6UL-V1I-LIN, Base board, 7" RGB Display, cable kit, access data to documentation and software SKU: PCoreMX6UL100-SKIT2 |
360,- € |
Software
 |
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € |
Displays and Display Kits
 |
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | ||
 |
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Touch-Kits
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cable
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
Plug Connector
 |
PicoCore™ 100 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R100PS.3 |
30,- € |
Workshops
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
|
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € | ||
 |
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € | ||
 |
Heat Sink Finned heat sink to stick on for cooling the CPU SKU: MHS.HS1919.1 |
10,- € | ||
 |
Heat Spreader PicoCore100 Heat spreader for cooling PicoCore boards. SKU: MHS.PC100.1 |
10,- € | ||
 |
Heat Sink PicoCore100 Heat sink for cooling PicoCore boards. SKU: MHS.PC100.2 |
12,- € |
Buildroot and Yocto
The Linux BSP "fsimx6ul-B2023.12" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or Wayland/Weston, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.
As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx6ul-Y2024.03, which is based on Yocto.
Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, wayland-weston, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more.
Both BSPs include the source code packages from U-Boot (2021.04), Linux kernel (based on 5.15.131/5.15.148) and Buildroot (2023.02.06) or Yocto (4.0) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.
F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 36 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
➜ More information about the new Buildroot Release B2023.12
➜ More information about the new YOCTO release Y2024.03
Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 27
Fedora 27 is a VirtualBox Appliance based on Fedora 27, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.
VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for fsimx6, fsimx6sx, fsimx6ul and fsimx7ulp.
The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.
Besides that, it contains a configured environment for Qt development (QT5) with cross-compile/debug kit, deployment strategy and demo application.
Please notice that it is required to register on our website to download this machine.
➜ Download F&S Development Machine - Fedora 27
➜ Quickstart Dokumentation
PicoCoreMX6UL100 - Product Flyer
- English (1009 KB, pdf) - 03/05/2021
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCoreMX6UL100 - Linux
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- Linux First Steps Documentation (2.5 MB, pdf) - 20/12/2023
- GPIO Reference Card (66 KB, pdf) - 18/10/2021
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- F&S Secure Boot (534 KB, pdf) - 19/03/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCoreMX6UL100 - Hardware
- Hardware Documentation (854 KB, pdf) - 02/09/2022
- 3D Step Model (1.2 MB, zip) - 09/07/2024
- PicoCoreMX6UL100 Starterkit Hardware Documentation (2.1 MB, pdf) - 10/01/2023
- Baseboard PCoreBBDSI Design Files (14 MB, zip) - 25/09/2024
- Baseboard PCoreBBDSI Gerber Files (772 KB, zip) - 09/09/2021
- Baseboard PCoreBBDSI 3D Files (21 MB, zip) - 15/12/2021
- Baseboard PCoreBBDSI Placement (5.7 MB, pdf) - 09/09/2021
- Baseboard PCoreBBDSI Schematic (2.9 MB, pdf) - 20/06/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variant
 |
PicoCore™MX6UL100-V3I-LIN NXP i.MX 6ULL ARM Cortex-A7, 512MB RAM, 512MB SLC NAND Flash, 2x 100Mb Ethernet, 2x CAN, Audio, Touch, LVDS, -20°C - +85°C, 3.8V..5,5V Supply, Linux Buildroot/Yocto SKU: PCoreMX6UL100-V3I-LIN |
Request | ||
Starterkit
| Starterkit PicoCore™MX6UL100 Linux PicoCore™MX6UL-V4-LIN, Baseboard, 7" LVDS Display, cable kit, access data to documentation and software SKU: PCoreMX6UL100-SKIT-LIN |
360,- € | |||
| RGB Starterkit PicoCore™MX6UL100 Linux PicoCore™MX6UL-V1I-LIN, Base board, 7" RGB Display, cable kit, access data to documentation and software SKU: PCoreMX6UL100-SKIT2 |
360,- € |
Software
|
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € |
Displays and Display Kits
|
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | ||
|
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Touch-Kits
|
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cable
|
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapter
Plug Connector
|
PicoCore™ 100 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R100PS.3 |
30,- € |
Workshops
|
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
|
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
Other Accessories
|
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
|
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € | ||
|
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € | ||
|
Heat Sink Finned heat sink to stick on for cooling the CPU SKU: MHS.HS1919.1 |
10,- € | ||
|
Heat Spreader PicoCore100 Heat spreader for cooling PicoCore boards. SKU: MHS.PC100.1 |
10,- € | ||
|
Heat Sink PicoCore100 Heat sink for cooling PicoCore boards. SKU: MHS.PC100.2 |
12,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
|
22 Nov, 08:13 |
i.MX6 CAAM - keyblob decryption fails after kernel upgrade |
|
22 Nov, 07:53 |
PicoCore™MX8ULP codec info |
|
21 Nov, 15:22 |
External ethernet PHY or switch connected to RMII/RGMII signals |
|
20 Nov, 15:29 |
Repartitioning NAND Flash (via Yocto/ Patch) |
|
20 Nov, 08:33 |
U-boot Display |
|
19 Nov, 12:27 |
Ethernet issue |
|
14 Nov, 12:20 |
Change to winter time |
|
13 Nov, 08:06 |
UARTC Voltage level problem on the RX side |
|
11 Nov, 15:27 |
No serial communication when booting |
|
11 Nov, 11:06 |
Unclear behaviour of ON_OFF pin on PicoCore |
| Computer on Module | with NXP i.MX 6ULL | |
|---|---|---|
|
The PicoCore™ Computer On Module product family has a new member - the PicoCoreMX6UL100, based on the NXP i.MX 6ULL ARM® CPU. The small size (35 x 40mm) makes the module an ideal partner for compact devices. The module is characterized by low cost and low power dissipation and is ideally suited for all applications with or without display (RGB or LVDS). Thus, this PicoCoreMX6UL100 complements the pin-compatible product family with i.MX8M Mini/ Nano and Plus at the bottom. An NXP CPU with ARM® Cortex®-A7 core with 900MHz is used. This makes the PicoCore™MX6UL100 a very low-cost COM module. The power dissipation of about 1W is excellent for portable, battery-powered devices. This makes it excellent for projects where cost, size, and power consumption need to be kept low. ➜ more information about the NXP i.MX 6ULL applications processor Long-term Availability until 2030Another feature is the long availability until at least 2030. Equipment and InterfacesThe PicoCore™MX6UL100 has sufficient memory (RAM, SLC NAND Flash, eMMC Flash). The module offers many interfaces on the 2x 100-pin connectors. |
Available interfaces are 2x Ethernet or RGMII, audio codec or I2S, USB host and device, UARTs, SPIs, I2Cs GPIOs, CAN and RGB or LVDS for display control. The touch panel is connected via I2C. As an option, this PicoCore is also offered with a pre-certified WLAN (2.4/ 5GHz) and BT (5.0 LE) module with an antenna socket. Due to the multiple assignments of signal lines of the CPU with different interfaces, it is possible to select the desired interfaces through registry entries. A list of the possible interfaces and also the pin assignment on the connector can be found in the hardware specification. Please note that not all available interfaces are available at the same time. Operating SystemThe operating system adapted for the PicoCore™MX6UL100 is Linux (Buildroot and Yocto are available) and supports all interfaces, thus ensuring simple software development without extensive hardware knowledge. |
