phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Menu

PCore™MX7ULP-V4-LIN

Computer On Module with NXP i.MX 7ULP CPU

For the start of development, we recommend:

Starterkit PicoCore™MX7ULP Linux
  340,- €
Tax not included

PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software

Power Consumption in Deep Power Down Mode about 12 mW only Power Consumption in Run Mode (LCD on, Idle) about 280mW only

PCore™MX7ULP-V4-LIN  
State Production  
CPU  
CPU NXP i.MX 7ULP  
Core ARM Cortex-A7 + Cortex-M4  
No of Cores 1 + M4  
Frequency 720MHz  
L2-Cache 256KB  
GPU 3D, 2D  
Operating System  
Linux Yocto, Buildroot
(uboot installed)		  
Real Time FreeRTOS  
Memory  
Flash 1MB SPI
4GB eMMC		  
RAM 1GB LPDDR3  
Interfaces  
SD-Card 1x external  
WiFi 802.11 ac/a/b/g/n  
BT 5.0 LE  
USB Device 1x OTG  
UART 5x  
I2C 3x  
SPI 1x  
Audio Line In/ Out/ Mic/ Headphone  
Touch Panel analog resistive and PCAP Touch ext. via I2C  
RTC external IC  
Display  
LVDS external LVDS Converter  
MIPI-DSI  
Common  
Supply Voltage +5VDC/ ±5% / 4.2V Battery  
Power Consumption 0,3W typ.  
Operating Temperature 0°C - +70°C  
Size 35x40mm
(LxB)		  
Weight ~10g  
Long Term Availability 2029  

PCoreMX7ULP BB TOP OBLIQUE Starterkit PicoCore™MX7ULP Linux
PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software
SKU: PCoreMX7ULP-SKit		 340,- €
 

Software

software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Displays

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH		 35,- €
 

Cables

B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 

Adapters

MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1 		25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3		 20,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 

Yocto and Buildroot

The Linux BSP "fsimx7ulp-B2019.12" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt or X11, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.

As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx7ulp-Y2020.03, which is based on Yocto.

Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more

Both BSPs include the source code packages from U-Boot (2017.03), Linux kernel (based on 4.9.88) and Buildroot (2019.05.01) or Yocto (2.4) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Buildroot Release B2019.12
➜ More information about the new YOCTO release Y2020.03


Start Your Development in Less Than an Hour - F&S Development Machine - Fedora 27

Fedora 27 is a VirtualBox Appliance based on Fedora 27, provided by F&S.
You will need less than an hour to start your development with this machine!
It is available for our customers for free.

login screen

VirtualBox is a high performance product for enterprise customers, it is also the only professional solution that is freely available as Open Source Software under the terms of the GNU General Public License (GPL) version 2.
The F&S Development Machine contains installed Board Support Packages for fsimx6, fsimx6sx, fsimx6ul and fsimx7ulp.
The F&S toolchain is installed, the source code is extracted and ready to run. Needed system packages and essential tools are installed, too.
Besides that, it contains a configured environment for Qt development (QT5) with cross-compile/debug kit, deployment strategy and demo application.

qtcreator debugging 400px

Please notice that it is required to register on our website to download this machine.

➜ Download F&S Development Machine - Fedora 27
➜ Quickstart Dokumentation

PicoCoreMX7ULP - Product Flyer


PicoCoreMX7ULP - Hardware


PicoCoreMX7ULP - Linux

Variant

PicoCoreMX7ULP TOP 450px PCore™MX7ULP-V4-LIN
NXP i.MX 7ULP ARM Cortex-A7 + Cortex-M4 1GB RAM, 1MB SPI Flash, 4GB eMMC, Audio, WLAN, BT, MIPI-DSI, 0°C - +70°C, 5V Versorgung, Linux Yocto
SKU: PCoreMX7ULP-V4-LIN		 Request  

Starterkit

PCoreMX7ULP BB TOP OBLIQUE Starterkit PicoCore™MX7ULP Linux
PicoCore™MX7ULP-V4-LIN, base board, cable kit, 3.5" MIPI-DSI Display, access data to documentation and software
SKU: PCoreMX7ULP-SKit		 340,- €
 

Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH		 35,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
b.mbu.2r280ps.3 PicoCore™ 80 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R80PS.3		 20,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1 		25,- €
 

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint