PicoCore™RT1-V1
Computer On Module with NXP i.MX RT1050 CPU
For the start of development, we recommend: |
PicoCore™RT1-V1 | ||
State | Samples | |
CPU | ||
CPU | NXP i.MX RT1050 | |
Core | ARM Cortex-M7 | |
No of Cores | 1 | |
Frequency | max. 600MHz | |
L2-Cache | 32KB | |
GPU | 2D | |
Operating System | ||
Real Time | FreeRTOS | |
Memory | ||
Flash | 256MB QSPI 16kB EEPROM |
|
RAM | 32MB SDRAM | |
Interfaces | ||
SD-Card | 1x external | |
Ethernet | 1 | |
USB Host | 1 | |
USB Device | 1x OTG 2.0 | |
CAN | max. 2x | |
UART | max. 3x | |
I2C | max. 4x | |
SPI | max. 2x | |
Audio | Line In/ Out/ Mic/ Headphone/I2S | |
Touch Panel | analog resistive and PCAP Touch ext. via I2C | |
RTC | 1x external IC | |
additional Interfaces | PWM, ADC, GPIO | |
Display | ||
RGB | 16bit | |
Common | ||
Supply Voltage | +3.8V bis 5.5VDC | |
Power Consumption | 1W typ. | |
Operating Temperature | 0°C - +70°C opt. -40°C - +85°C |
|
Size | 35x40mm (LxB) |
|
Weight | ~10g | |
Long Term Availability | 2031 |
Starterkit PicoCore™RT1 PicoCore™RT1-V1, base board, display, cable kit, access data to documentation and software SKU: PCoreRT1-SKIT |
360,- € |
Software
![]() |
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
![]() |
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display and Display Kits
![]() |
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | ||
![]() |
Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT |
170,- € | ||
![]() |
Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB |
210,- € |
Cable
![]() |
40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23 |
10,- € | ||
![]() |
50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41 |
10,- € |
Adapters
![]() |
armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI |
50,- € | ||
![]() |
Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1 |
50,- € |
Plug Connector
![]() |
PicoCore™ 80 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R80PS.3 |
20,- € |
Workshops
![]() |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request |
Other Accessories
![]() |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
![]() |
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € |
tbd
PicoCoreRT1 - Product Flyer
- English (844 KB, pdf) - 07/07/2020
Usage
By downloading you accept our general terms and conditions.
PicoCoreRT1 - Hardware
- PicoCoreRT1 Hardware Documentation (477 KB, pdf) - 14/12/2020
- Starterkit Hardware Documentation (1.4 MB, pdf) - 07/01/2020
- Baseboard for Stepper Motors Hardware Documentation (713 KB, pdf) - 17/01/2020
- Starterkit Design Files (226 KB, zip) - 17/12/2018
- Starterkit Schematic (254 KB, pdf) - 17/12/2018
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variant
![]() |
PicoCore™RT1-V1 NXP i.MX RT1050, Cortex-M7, 32MB SDRAM, 256MB QSPI Flash, 16kB EEPROM, Audio, Touch, RGB, 0°C - +70°C opt. -40°C - +85°C, 3.8V Supply, FreeRTOS SKU: PCoreRT1-V1 |
Request |
Starterkit
Starterkit PicoCore™RT1 PicoCore™RT1-V1, base board, display, cable kit, access data to documentation and software SKU: PCoreRT1-SKIT |
360,- € |
Accessories
![]() |
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Link to the Forum
You will always find support in our forum.
Recent Contributions
15 Jul, 09:16 |
Default U-Boot Environment address |
05 Jul, 13:37 |
Installing bootloader & UEFI using UUU-Tool |
01 Jul, 08:48 |
New Demo Application: .NET8 on Linux with GUI and Hardware Interfaces |
27 Jun, 10:50 |
Device tree Update is not working |
26 Jun, 08:41 |
Installing a Windows IoT LTSC Image |
25 Jun, 13:48 |
Shutdown on MX8MP |
24 Jun, 09:34 |
fw_printenv does not work reliable |
18 Jun, 12:47 |
Custom U-Boot can not be installed |
14 Jun, 12:57 |
Measuring boot Time in U-Boot and EDK2/UEFI |
13 Jun, 12:04 |
New UEFI Version allows use of 2GB RAM instead of 4GB |