phonenumber +49(0)711 123722-0
|
DE EN

Starterkit FS 93 OSM-SF Linux

 

Starterkit FS 93 OSM-SF Linux
  360,- €
Tax not included

Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.

OSM93 FERT21 Rev100 TOP
FS 93 OSM-SF-V1I
NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, LVDS, RTC, -20°C - +85°C, Linux
SKU: OSM93-V1I

PCoreBBDSI Rev130 Top
PicoCore™100 Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT2B

ADP OSM BB Rev100 TOP
OSM-Baseboard-Adapter
Connects an OSM module with its baseboard
SKU: ADP-OSM-BB

Produkt SINTF-CABKIT nicht vorhanden


Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35

B.MKAB
LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44


MHS.OSM.1 TOP
Heat Spreader OSM Size-S
Heat Spreader for cooling the OSM Size-S modules
SKU: MHS.OSM.1

Software

software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux
1,000,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW
700,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS
500,- €
 

Displays and Display Kits

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22
80,- €
 
B.LCD.24 FRONT 7" MIPI-DSI Display with PCAP Touch (long-term available)
7" TFT (800x1280) MIPI-DSI Display with PCAP Touch (TFT-7"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.24
100,- €
 
LCD 7 LVDS 1 front web 7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1
95,- €
 
LCD 10 LVDS 1 front web 10” LVDS Display with PCAP Touch (long-term available)
10” LVDS LCD Display with PCAP Touch
SKU: LCD.10.LVDS.1
130,- €
 

Touch-Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C
Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2
35,- €
 

Cables

B.MKAB47 Capacitive Touch Cable
6-pin cable with matching connector for connecting an I2C touch to F&S boards
SKU: B.MKAB.47
10,- €
 

Adapters

MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1
25,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1
30,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
MHS.OSM.1 TOP Heat Spreader OSM Size-S
Heat Spreader for cooling the OSM Size-S modules
SKU: MHS.OSM.1
10,- €
 

Variants

OSM93 FERT21 Rev100 TOP FS 93 OSM-SF-V1I
NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, LVDS, RTC, -20°C - +85°C, Linux
SKU: OSM93-V1I
Request  
OSM93 FERT21 Rev100 TOP FS 93 OSM-SF-V5I
NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, MIPI-DSI, RTC, -20°C - +85°C, Linux
SKU: OSM93-V5I
Request  

Starterkit

PCoreBBDSI OSM BB OSM93 FERT21 Rev100 Starterkit FS 93 OSM-SF Linux
Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: OSM93-SKIT-LIN
360,- €
 

Yocto Release Y2024.09

For the CPU NXP i.MX93 F&S offers a Yocto based environment. We offer the Linux BSP fsimx93-Y2024.09-pre, which is based on Yocto.

Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.

The BSP is based on the following source code packages:

  • U-Boot: 2024.04
  • Linux-Kernel:  6.6.48
  • Yocto: 5.0.3 Scarthgap

Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. 

F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Yocto release

FS 93 OSM-SF - Product Flyer

FS 93 OSM-SF - Hardware

FS 93 OSM-SF - Linux

 

Variants

OSM93 FERT21 Rev100 TOP FS 93 OSM-SF-V1I
NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, LVDS, RTC, -20°C - +85°C, Linux
SKU: OSM93-V1I
Request  
OSM93 FERT21 Rev100 TOP FS 93 OSM-SF-V5I
NXP i.MX93 Dual Cortex®-A55 @ 1.7GHz, 1GB LPDDR4, 8GB eMMC, EEPROM, 2x RGMII, 2x CAN, MIPI-DSI, RTC, -20°C - +85°C, Linux
SKU: OSM93-V5I
Request  

Starterkit

PCoreBBDSI OSM BB OSM93 FERT21 Rev100 Starterkit FS 93 OSM-SF Linux
Evaluation kit for FS 93 OSM-SF with base board, OSM-Adapter, cable kit, 7" LVDS display, heat spreader and access data to documentation and software.
SKU: OSM93-SKIT-LIN
360,- €
 

Link to the forum

You can find support at any time in our Forum.

Current contributions

31 Oct, 12:14

U-boot Display

31 Oct, 10:25

PicoCore Som version number

30 Oct, 09:41

RTC - an occasional problem

29 Oct, 09:30

Ethernet issue

28 Oct, 14:27

Reset behaviour of GPIO-Pins

23 Oct, 13:19

OSM Carrier Board Design Made Easy

22 Oct, 08:34

Problem creating partitions using NBoot

17 Oct, 08:55

How to install and configure the UDPusher driver

16 Oct, 07:57

Wifi doesn't work.

10 Oct, 13:20

Reset reason in U-Boot