+49(0)711 123722-0
(0)
Starterkit FS 93 OSM-SF Linux
|
|
|
PicoCore™100 Baseboard
For connecting USB 3.0 (OTG), SD card, serial, I²C, Ethernet, CAN, mPCIe, audio (In/ Out/ Mic/ Headphone), 2x MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT4B
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT4
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35
LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44
| FS 93 OSM-SF-V1I | FS 93 OSM-SF-V5I | FS 93 OSM-SF-V2I | |
| State | Production | Production | Production |
| CPU | - | - | - |
| CPU | NXP i.MX 93 | NXP i.MX 93 | NXP i.MX 93 |
| Core | ARM Cortex-A55 Cortex-M33 NPU |
ARM Cortex-A55 Cortex-M33 NPU |
ARM Cortex-A55 Cortex-M33 NPU |
| No of Cores | 2x A55 + M33 | 2x A55 + M33 | 2x A55 + M33 |
| Frequency | 1.7GHz + 250MHz | 1.7GHz + 250MHz | 1.7GHz + 250MHz |
| L2-Cache | 2x64kB L2 + 256kB L3 | 2x64kB L2 + 256kB L3 | 2x64kB L2 + 256kB L3 |
| GPU | PXP | PXP | PXP |
| Operating System | - | - | - |
| Linux | Yocto (uboot installed) |
Yocto (uboot installed) |
Yocto (uboot installed) |
| Real Time | FreeRTOS | FreeRTOS | FreeRTOS |
| Memory | - | - | - |
| Flash | 64 kbit EEPROM | 64 kbit EEPROM | 64 kbit EEPROM |
| eMMC | 8GB eMMC | 8GB eMMC | 16GB eMMC |
| RAM | 1GB LPDDR4 x16 | 1GB LPDDR4 x16 | 2GB LPDDR4 x16 |
| Interfaces | - | - | - |
| SD-Card | 1x SDIO | 1x SDIO | 1x SDIO |
| Ethernet | 2x RGMII | 2x RGMII | 2x RGMII |
| USB Host | 1x OTG 2.0 | 1x OTG 2.0 | 1x OTG 2.0 |
| USB Device | 1x OTG 2.0 | 1x OTG 2.0 | 1x OTG 2.0 |
| CAN | 2x CAN-FD | 2x CAN-FD | 2x CAN-FD |
| UART | 4x | 4x | 4x |
| I2C | 4x | 4x | 4x |
| SPI | 2x | 2x | 2x |
| Audio | I2S | I2S | I2S |
| Digital I/O | 6 GPIO_A[1..0]+_C[4..7] |
6 GPIO_A[1..0]+_C[4..7] |
6 GPIO_A[1..0]+_C[4..7] |
| ADC | 2x | 2x | 2x |
| Touch Panel | Touch via I2C | Touch via I2C | Touch via I2C |
| Camera analog/digital | MIPI-CSI (2 lanes) | MIPI-CSI (2 lanes) | MIPI-CSI (2 lanes) |
| RTC | PCF85263ATL | PCF85263ATL | PCF85263ATL |
| additional Interfaces | 2x PWM, BL-PWM | 2x PWM, BL-PWM | 2x PWM, BL-PWM |
| Display | - | - | - |
| LVDS | 1x 4 Lanes | - | 1x 4 Lanes |
| MIPI-DSI | - | 1x 4 Lanes | - |
| Common | - | - | - |
| Supply Voltage | 5V DC/±5% | 5V DC/±5% | 5V DC/±5% |
| Power Consumption | 3W typ. | 3W typ. | 3W typ. |
| Operating Temperature | -25°C - +85°C | -25°C - +85°C | -25°C - +85°C |
| Size | 30x30mm | 30x30mm | 30x30mm |
| Weight | ~5g | ~5g | ~5g |
| Long Term Availability | 2038 | 2038 | 2038 |
| FS 93 OSM-SF-V1I | FS 93 OSM-SF-V5I | FS 93 OSM-SF-V2I |
 |
Starterkit FS 93 OSM-SF Linux FS 93 OSM-SF-V1I-LIN, carrier board, OSM adapter, cable kit, 7" LVDS display with PCAP touch, heat spreader + heat sink, access data to documentation and software SKU: OSM93-SKIT-LIN |
360,- € |
Software
 |
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € |
Displays and Display Kits
 |
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € | ||
 |
7” LVDS Display with PCAP Touch (long-term available) 7” LVDS LCD Display with PCAP Touch SKU: LCD.7.LVDS.1 |
95,- € | ||
 |
10” LVDS Display with PCAP Touch (long-term available) 10” LVDS LCD Display with PCAP Touch SKU: LCD.10.LVDS.1 |
130,- € |
Touch-Kits
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
 |
PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2 |
35,- € | ||
Cables
 |
Capacitive Touch Cable 6-pin cable with matching connector for connecting an I2C touch to F&S boards SKU: B.MKAB.47 |
10,- € | ||
| Backlight Cable Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1). SKU: B.MKAB.35 |
7,- € |
Adapters
| MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1 |
25,- € | |||
 |
Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1 |
30,- € |
Workshops
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
Heat Spreader OSM Size-S Heat Spreader for cooling the OSM Size-S modules SKU: MHS.OSM.1 |
10,- € |
Variants
 |
FS 93 OSM-SF-V1I SKU: OSM93-V1I |
Request | ||
|
FS 93 OSM-SF-V5I SKU: OSM93-V5I |
Request | ||
|
FS 93 OSM-SF-V2I NXP i.MX93 Dual Cortex®-A55@1.7GHz + Cortex-M33 + NPU, 2GB LPDDR4, 16GB eMMC, EEPROM, 2x USB, 2x RGMII, 2x CAN, LVDS, MIPI-CSI, RTC, -25°C - +85°C, Linux SKU: OSM93-V2I |
Request | ||
Starterkit
|
Starterkit FS 93 OSM-SF Linux FS 93 OSM-SF-V1I-LIN, carrier board, OSM adapter, cable kit, 7" LVDS display with PCAP touch, heat spreader + heat sink, access data to documentation and software SKU: OSM93-SKIT-LIN |
360,- € |
Yocto Release Y2024.09
For the CPU NXP i.MX93 F&S offers a Yocto based environment. We offer the Linux BSP fsimx93-Y2024.09-pre, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
The BSP is based on the following source code packages:
- U-Boot: 2024.04
- Linux-Kernel: 6.6.48
- Yocto: 5.0.3 Scarthgap
Also included is our cross toolchain, some sample applications, and all binaries in the default configuration.
F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
FS 93 OSM-SF - Product Flyer
- Quick Facts (357 KB, pdf) - 17/10/2024
Usage
By downloading you accept our general terms and conditions.
FS 93 OSM-SF - Hardware
- FS 93 OSM-SF Hardware Documentation (1.4 MB, pdf) - 20/09/2024
- OSM Cooling Solution (592 KB, pdf) - 16/04/2024
- OSM Implementation Guide (742 KB, pdf) - 11/11/2024
- OSM Carrier Board Design (1.1 KB, txt) - 30/01/2025
- OSM Carrier Board Design (13 MB, zip) - 30/01/2025
- Hardware Documentation ADP-OSM-BB (1.2 MB, pdf) - 05/07/2024
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
FS 93 OSM-SF - Linux
- OSM93 Linux First Steps (2.1 MB, pdf) - 06/11/2024
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variants
|
FS 93 OSM-SF-V1I SKU: OSM93-V1I |
Request | ||
|
FS 93 OSM-SF-V5I SKU: OSM93-V5I |
Request | ||
|
FS 93 OSM-SF-V2I NXP i.MX93 Dual Cortex®-A55@1.7GHz + Cortex-M33 + NPU, 2GB LPDDR4, 16GB eMMC, EEPROM, 2x USB, 2x RGMII, 2x CAN, LVDS, MIPI-CSI, RTC, -25°C - +85°C, Linux SKU: OSM93-V2I |
Request | ||
Starterkit
|
Starterkit FS 93 OSM-SF Linux FS 93 OSM-SF-V1I-LIN, carrier board, OSM adapter, cable kit, 7" LVDS display with PCAP touch, heat spreader + heat sink, access data to documentation and software SKU: OSM93-SKIT-LIN |
360,- € |
Link to the forum
You can find support at any time in our Forum.
Current contributions
|
21 Feb, 13:45 |
Phy link never came up / pcie failed with error -110 |
|
21 Feb, 12:19 |
How to Enable Unified Write Filter (UWF) |
|
13 Feb, 09:10 |
fw_printenv does not work reliable |
|
04 Feb, 12:35 |
Ethernet issue |
|
03 Feb, 20:57 |
fsimx8ulp-Y2024.12-pre flashig emmc |
|
30 Jan, 06:49 |
Redirect output of "netstat -n" |
|
21 Jan, 17:03 |
Fedora 36 - Buildroot fsimx6-B2024.04 - steps to enable or install USB Video Class (UVC) drivers for USB camera |
|
21 Jan, 16:50 |
How to enable HDMI video output |
|
20 Jan, 06:54 |
PicoCore™MX8ULP codec control issue |
|
14 Jan, 11:23 |
RTC - an occasional problem |
