Starterkit efus™MX8X Linux
|

efus™MX8X-V4-LIN
NXP i.MX 8QuadXPlus ARM Cortex-A35 + Cortex-M4, 1GB RAM, 4GB eMMC, 2x Gb Ethernet, 2x CAN, Audio, WLAN, BT, MIPI-CSI Camera, Touch, 2x LVDS, MIPI-DSI, -25°C - +85°C, 5V Supply, Linux Yocto, FreeRTOS
SKU: efusMX8X-V4-LIN

efus™ Base Board
Offers connection options for 2x Ethernet, 3x USB Host, USB Device (OTG), micro SD Card, SD Card, 4x Serial, I²C, SPI, 2x PWM, Audio (Line In, Line Out, Mic), digital/analog Camera, DVI/DisplayPort, mini PCIe and SATA.
SKU: EFUS-SINTF-FERT1B

7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
SKU: B.LCD.19

Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
Software
![]() |
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
![]() |
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Display
![]() |
7" LVDS Display with PCAP Touch 7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211) SKU: B.LCD.19 |
200,- € |
Touch Kit
![]() |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request |
Cables
![]() |
LVDS Cables for 7" LVDS Display LVDS Cables for 7" LVDS Display (B.LCD.19) SKU: B.MKAB.51 |
50,- € | ||
![]() |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € |
Adapters
![]() |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
![]() |
MIPI Camera Kit Adapter module with camera SKU: ADP-MIPICAM1 |
100,- € | ||
![]() |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € |
Plug Connector
![]() |
MXM-2 Connector For connecting efus™- or QBliss-modules via goldfinger contacts. SKU: B.MST.2R230PL.1 |
43,- € |
Workshop
![]() |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request |
Other Accessories
![]() |
efus™ Latch Allows to mount efus™ modules on the base board. SKU: B.MST.VR.5 |
36,- € | ||
![]() |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
![]() |
Heat Sink Finned heat sink to stick on for cooling the CPU SKU: B.MKUE.3 |
10,- € | ||
![]() |
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € |