+49(0)711 123722-0
(0)
Starterkit PicoCOM1.2 Linux
|
|
|
PCOM1.2-V1I-LIN
NXP i.MX 6UltraLite Cortex-A7, 256MB RAM, 256MB Flash, 1x Ethernet, 1x CAN, Audio, -25°C - +85°C, 3.3V Supply, Linux
SKU: PCOM1.2-V1I-LIN
PicoCOM1 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, RS485, SD Card Slot, I²C, SPI, Audio (Line In, Line Out) and E/ A Ports.
SKU: PCOM1-STARTINTF1
Software
 |
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Adapter
 |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € |
Workshops
 |
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
|
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € |
 |
Starterkit PicoCOM1.2 Windows PicoCOM1.2-V1I-W13, base board, cable kit, access data to documentation and software SKU: PCOM1.2-SKIT-W13 |
199,- € | ||
|
Starterkit PicoCOM1.2 Linux PicoCOM1.2-V1I-LIN, base board, cable kit, access data to documentation and software SKU: PCOM1.2-SKIT-LIN |
199,- € |
Linux
Das Linux BSP (imx6-linux-3.0.35-f+s-V0.2) beinhaltet den von F&S angepassten Linux Kernel Source Code (v3.0.35), den angepassten U-Boot Source Code (2009.08) und ein angepasstes Buildroot (2012.08), sowie unsere Cross-Toolchain. Zudem sind unsere Standard Binaries des Linux Kernel Images, U-Boot und ein UBIFS Root Filesystem beigefügt. Um einen ersten Eindruck von dem Funktionsumfang der Baugruppe zu bekommen, sind in dem auf Buildroot basierenden Root Filesystem unter anderem folgende Features installiert:
Busybox 1.20.x, gdb 6.8, alsa-utils, gstreamer, directFB, fbv, X11-R7, Fluxbox, feh, openssl, openssh, freetype, glib2, tslib, libv4l, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, u.v.m.
Darüber hinaus bieten wir ein vorkonfiguriertes Ubuntu Root Filesystem an. Über die interne Paketverwaltung steht dabei eine Vielzahl weiterer Software-Pakete zu Verfügung.
Das BSP enthält neben anderen Dokumenten auch unsere First-Steps Dokumentation, sowie einige Beispielapplikationen.
Windows Embedded Compact 7
Windows Embedded Compact 7 für die QBlissA9 ist in Vorbereitung.
Windows Embedded Compact 7 auf der QBlissA9 installiert, bietet Bootloader, Schnittstellentreiber und Kernel (mit z.B. Silverlight, Mediaplayer oder IE).
Die Schnittstellentreiber fast aller angebotenen Schnittstellen stehen schon fertig zur Verfügung (Ein Zugangscode zu dieser Software liegt dem Starterkit bei).
Mühsames Arbeiten mit dem Platformbuilder entfällt, diese Arbeit haben wir Ihnen schon abgenommen.
Software wird mit Visual Studio .NET (nicht im Starterkit enthalten) in den Sprachen C, C++, C# oder VB.NET erstellt.
Verwenden Sie Schnittstellen wie z.B. I²C auf die gleiche Weise wie eine RS232 Schnittstelle ohne sich mit der darunterliegenden Hardware auseinandersetzen zu müssen.
Konfigurieren Sie das Display und andere Einstellungen mit dem F&S Konfigurationstool.
QBlissA9 - Hardware Dokumentation
- QBlissA9 Hardware Beschreibung (1.4 MB, pdf) - 19/09/2018
Usage
By downloading you accept our general terms and conditions.
Sorry, there are no files to show.
General Documentations
- Display Settings from Datasheet (11 KB, pdf) - 19/11/2009
Usage
By downloading you accept our general terms and conditions.
Sorry, there are no files to show.
PicoCOM1.2 - Product Flyer
- English (1.2 MB, pdf) - 15/08/2022
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCOM1.2 - Hardware
- PicoCOM1.2 Hardware Documentation (596 KB, pdf) - 18/04/2018
- PicoCOM1.2 Startinterface Hardware Documentation (95 KB, pdf) - 27/05/2022
- PicoCOM1.2 3D Step Model (2.6 MB, zip) - 07/01/2025
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCOM1.2 - Linux
- PicoCOM1.2 Linux First Steps (2.5 MB, pdf) - 20/12/2023
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- GPIO Reference Card (56 KB, pdf) - 09/12/2024
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- Secure Boot BSP Documentation (534 KB, pdf) - 19/03/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with Crank (485 KB, pdf) - 28/07/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- Mono on F&S Boards (2.6 MB, pdf) - 17/11/2023
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
PicoCOM1.2 - Windows Embedded CE/Compact
- PicoCOM1.2 First Steps (2.2 MB, pdf) - 20/11/2018
- i.MX6 Device Driver (4.6 MB, pdf) - 02/03/2021
- CAN Device Driver (967 KB, pdf) - 23/03/2015
- I2C Device Drivers I2C+NI2C (393 KB, pdf) - 13/01/2017
- Native SPI Device Driver (2.2 MB, pdf) - 13/03/2013
- FTP Server Configuration (15 KB, pdf) - 30/12/2004
- TCP/IP Parameter (37 KB, pdf) - 30/12/2004
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Usage
By downloading you accept our general terms and conditions.
Variants
 |
PCOM1.2-V1I-W13 NXP i.MX 6UltraLite Cortex-A7, 256MB RAM, 256MB Flash, 1x Ethernet, 1x CAN, Audio, -25°C - +85°C, 3.3V Supply, Windows Embedded Compact 2013 SKU: PCOM1.2-V1I-W13 |
Request | ||
|
PCOM1.2-V1I-LIN NXP i.MX 6UltraLite Cortex-A7, 256MB RAM, 256MB Flash, 1x Ethernet, 1x CAN, Audio, -25°C - +85°C, 3.3V Supply, Linux SKU: PCOM1.2-V1I-LIN |
Request | ||
Starterkits
|
Starterkit PicoCOM1.2 Windows PicoCOM1.2-V1I-W13, base board, cable kit, access data to documentation and software SKU: PCOM1.2-SKIT-W13 |
199,- € | ||
|
Starterkit PicoCOM1.2 Linux PicoCOM1.2-V1I-LIN, base board, cable kit, access data to documentation and software SKU: PCOM1.2-SKIT-LIN |
199,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
|
21 Feb, 13:45 |
Phy link never came up / pcie failed with error -110 |
|
21 Feb, 12:19 |
How to Enable Unified Write Filter (UWF) |
|
13 Feb, 09:10 |
fw_printenv does not work reliable |
|
04 Feb, 12:35 |
Ethernet issue |
|
03 Feb, 20:57 |
fsimx8ulp-Y2024.12-pre flashig emmc |
|
30 Jan, 06:49 |
Redirect output of "netstat -n" |
|
21 Jan, 17:03 |
Fedora 36 - Buildroot fsimx6-B2024.04 - steps to enable or install USB Video Class (UVC) drivers for USB camera |
|
21 Jan, 16:50 |
How to enable HDMI video output |
|
20 Jan, 06:54 |
PicoCore™MX8ULP codec control issue |
|
14 Jan, 11:23 |
RTC - an occasional problem |
