Computer On Module with NXP i.MX 8M Plus CPU
|CPU||NXP i.MX 8M Plus|
|Core||ARM Cortex-A53 + Cortex-M7
NPU, ISP, HIFI4
|No of Cores||4x A53 + 1x M7|
|Frequency||1,6GHz + 800MHz|
|GPU||3D/2D, ES 3.1/3.0, CL™ 1.2 VG™ 1.1|
|VPU||1080p60, h.265/4, VP9, VP8,
Video Encode: 1080p60, h.265/4
|Linux||Buildroot/ Yocto (uboot installed)|
|USB Host||1x 3.0|
|USB Device||1x OTG 3.0|
|Audio||Line In/ Out/ Mic/ Headphone|
|Touch Panel||analog resistive and PCAP Touch ext. via I2C|
|Camera analog/digital||2x MIPI CSI|
|additional Interfaces||max. 4x PWM, SPDIF, ESAI, SAI, SSI|
|MIPI-DSI||1x 4 Lanes|
|Supply Voltage||+3.8V bis 5.5VDC|
|Power Consumption||4W typ.|
|Operating Temperature||-20°C - +85°C|
|Long Term Availability||2035|
|Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
|Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
|Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.
|7" LVDS Display with PCAP Touch
7" TFT (800x480) LVDS Display with PCAP Touch (J070WVTC0211)
|3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
|Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
|Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
|LVDS Cables for 7" LVDS Display
LVDS Cables for 7" LVDS Display (B.LCD.19)
LVDS cable with JAE FI X30 on one side and open ends on the other side
|30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
|LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
|MIPI Camera Kit
Adapter module with camera
To supply armStone™ and PicoCore™ modules with 24V.
|MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
|mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE
|Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
|MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
|PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
|Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
Finned heat sink to stick on for cooling the CPU
|SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
Heat spreader for cooling PicoCore boards.
For the CPU NXP i.MX8M Plus F&S offers a Yocto based environment. We offer the Linux BSP fsimx8mp-Y2021.07, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
The BSP contains the source code packages of U-Boot (2020.04), Linux kernel (based on 5.4.70) and Yocto (3.0 Zeus) adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. Last but not least, detailed documents on the hardware are included, as well as the First Steps documentation for an easy start.
F&S will offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 27 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
Development start in under an hour
F&S Development Machine - Fedora 27
For a quick start into development with Linux we provide a VirtualBox-based virtual hard disk VHD for download. The VHD uses Fedora 27 as Linux distribution.
With this machine you can start your development in less than an hour.
The machine is free of charge for our customers.
VirtualBox is a powerful product for corporate customers and at the same time the only professional solution which is freely available as Open Source Software under the terms of the GNU General Public License Version 2.
The F&S Development Machine contains pre-installed board support packages for fsimx8mm and fsimx8mp (64 bit CPU).
The appropriate F&S toolchain is installed in the HVD, the source code is extracted and ready to use.
Necessary system packages and tools are also already installed.
Furthermore, it contains a configured environment for QT development (QT5) with cross-compile/debug kit, deployment strategy and demo application.
Note: To download the Development Machine, you must be registered on our website.
PicoCoreMX8MP - Product Flyer
PicoCoreMX8MP - Linux
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- PicoCoreMX8MP Linux First Steps (1.4 MB, pdf) - 07/06/2021
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- Application Development with Eclipse (2.5 MB, pdf) - 18/03/2022
- Application Development with QT5 (2.3 MB, pdf) - 11/03/2021
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.8 MB, pdf) - 18/05/2022
- Mono on F&S Boards (2.6 MB, pdf) - 17/06/2020
- How to Write SD Card Image (121 KB, pdf) - 29/03/2021
- DOTNET5 on F&S Boards (242 KB, pdf) - 25/03/2022
PicoCoreMX8MP - Hardware
- PicoCoreMX8MP Hardware Documentation (964 KB, pdf) - 15/03/2022
- Baseboard Hardware Documentation (2.1 MB, pdf) - 04/04/2022
- Baseboard PCoreBBDSI Design Files (14 MB, zip) - 13/12/2021
- Baseboard PCoreBBDSI Gerber Files (772 KB, zip) - 09/09/2021
- Baseboard PCoreBBDSI 3D Files (21 MB, zip) - 15/12/2021
- Baseboard PCoreBBDSI Placement (5.7 MB, pdf) - 09/09/2021
- Baseboard PCoreBBDSI Schematic (2.8 MB, pdf) - 09/09/2021
- 3D Step Model PicoCoreMX8MP (1 MB, zip) - 11/11/2021
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
Link to the Forum
Support finden Sie jederzeit in unserem Forum.
01 Jul, 10:49
|Please help me save a Pico Core MX8MM development kit|
29 Jun, 11:23
|Using CSI to connect ov5647 camera|
23 Jun, 13:18
|Missing Serial Port|
13 Jun, 14:05
07 Jun, 08:58
|Enabling support for SSH and SFTP|
31 May, 08:18
|Kernel panic armStoneA5|
24 May, 14:21
|New F&S Development Machine - Fedora30|
24 May, 14:18
|New Yocto Release fsimx7ulp-Y2022.05|
24 May, 09:39
|QBlissA9 does not boot|
20 May, 17:12
|GPIO pins not working (PicoCOM 1.2 and StartInf1)|
Windows 10 IOT Enterprise
Win 10 IoT Enterprise on i.MX 8 & 9 family brings full Windows application capabilities in a small footprint delivering a low cost, low power solution ideal for compact & fan less designs .
Customers get longer-term OS support. Window10IoT enterprise LTSC release has an optional 10 Years support.
Access thousands of existing apps and leverage a huge ecosystem.
Re-use your existing C# .Net application and bring to a new level.
Future releases will support GPU acceleration for Chrome/Edge, WPF apps and video playback optimizations.
Use existing enterprise-grade device management tools to keep devices up-to-date and operating reliably.
Secure Boot as well as Over the Air update is integrated.
Protect your devices with world-class security built into Windows for IoT Enterprise and deliver a predicable experience with device lockdown.
Instant Multi-Cloud connectivity is also a feature of Win 10 IOT Enterprise.
Please contact us to get more information about features and availability.