phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

NetDCUA9

System On Module with NXP i.MX 6 CPU

 

NetDCUA9  
State EOL  
CPU  
CPU NXP i.MX 6  
Core ARM Cortex-A9  
No of Cores Solo/ DualLite  
Frequency max. 1000MHz  
L2-Cache max. 1MB  
GPU 2D 600Mpcl/s  
Video 1080p60  
Operating System  
Linux Buildroot/Yocto
(uboot installiert)		  
Windows WEC 7
WEC 2013
(Bootloader installiert)		  
Memory  
Flash max. 512MB SLC NAND
max. 32GB eMMC		  
RAM max. 4GB  
Interfaces  
SD-Card 1x on-board  
Ethernet 10/100Mb
IEEE1588		  
USB Host 1x  
USB Device 1x  
CAN 2x  
UART 3x  
I2C 1x  
SPI 1x  
Audio Line In/Out/Mic  
Digital I/O max. 21  
Touch Panel 4-wire, analog resistive
PCAP Touch via I2C		  
Display  
RGB 24bit  
LVDS 24bit  
Common  
Supply Voltage +5V DC/ ±5%  
Power Consumption 3W typ.  
Operating Temperature -25°C - +85°C  
Size 100x80x11mm
(LxBxH)		  
Weight ~45g  
Long Term Availability 2035  


NDCUA9-V1I-LIN NDCUA9-V1I-W13 NDCUA9-V1I-WEC7 NDCUA9-V2I-W13
State EOL EOL EOL EOL
CPU - - - -
CPU NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 NXP i.MX 6
Core ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9
No of Cores Solo Solo Solo Solo
Frequency 1000MHz 1000MHz 1000MHz 1000MHz
L2-Cache 1MB 1MB 1MB 1MB
GPU 2D 600Mpcl/s 2D 600Mpcl/s 2D 600Mpcl/s 2D 600Mpcl/s
Video 1080p60 1080p60 1080p60 1080p60
Operating System - - - -
Linux Buildroot/Yocto
(uboot installiert)		 - - -
Windows - WEC 2013
Bootloader installiert		 WEC 7
Bootloader installiert		 WEC 2013
Bootloader installiert
Memory - - - -
Flash 256MB SLC NAND 256MB SLC NAND 256MB SLC NAND 256MB SLC NAND
RAM 512MB 512MB 512MB 512MB
Interfaces - - - -
SD-Card 1x on-board 1x on-board 1x on-board 1x on-board
Ethernet 10/100Mb
IEEE1588		 10/100Mb
IEEE1588		 10/100Mb
IEEE1588		 10/100Mb
IEEE1588
USB Host 1x 1x 1x 1x
USB Device 1x 1x 1x 1x
CAN 2x 2x 2x 2x
UART 3x 3x 3x 3x
I2C 1x 1x 1x 1x
SPI 1x 1x 1x 1x
Audio Line In/Out/Mic Line In/Out/Mic Line In/Out/Mic Line In/Out/Mic
Digital I/O max. 21 max. 21 max. 21 max. 21
Touch Panel 4-wire, analog resistive
PCAP Touch via I2C		 4-wire, analog resistive
PCAP Touch via I2C		 4-wire, analog resistive
PCAP Touch via I2C		 4-wire, analog resistive
PCAP Touch via I2C
Display - - - -
RGB 24bit 24bit 24bit -
LVDS - - - 24bit
Common - - - -
Supply Voltage +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5% +5V DC/ ±5%
Power Consumption 3W typ. 3W typ. 3W typ. 3W typ.
Operating Temperature -25°C - +85°C -25°C - +85°C -25°C - +85°C -25°C - +85°C
Size 100x80x11mm
(LxBxH)		 100x80x11mm
(LxBxH)		 100x80x11mm
(LxBxH)		 100x80x11mm
(LxBxH)
Weight ~45g ~45g ~45g ~45g
Long Term Availability 2035 2035 2035 2035
NDCUA9-V1I-LIN NDCUA9-V1I-W13 NDCUA9-V1I-WEC7 NDCUA9-V2I-W13

Software

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET		 500,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE		 500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN		 500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE		 500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S		 1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows		 500,- €
 

Displays

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15		 120,- €
 

Cable

B.MKAB.23 40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23		 10,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C		 80,- €
 
Adapter RGB to DVI NetDCU/ PicoCOM DVI Adapter
Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen.
SKU: ADP-RGB2DVI		 50,- €
 

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 

Buildroot and Yocto

The Linux BSP "fsimx6-B2020.04" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt, Wayland/Weston or X11, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.

As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx6-Y2020.03, which is based on Yocto.

Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more

Both BSPs include the source code packages from U-Boot (2018.03), Linux kernel (based on 4.9.88) and Buildroot (2019.05.01) or Yocto (2.4) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Buildroot Release B2020.04
➜ More information about the new YOCTO release Y2020.03

Windows Embedded Lifetime

Feature Available until  End of Mainstream Support End of Extended Support
Windows Embedded Compact 2013 31.05.2028  10.09.2018 10.10.2023
Windows Embedded Compact 7 28.02.2026  12.04.2016 13.04.2021
Windows CE 6.0 28.02.2022  09.04.2013 10.04.2018

Windows Embedded Compact 2013

The highly flexible and hard real-time operating system has kernel, interface drivers and bootloader. It benefits from all the features of a modern CPU, such as ARMv7 THUMB2 command structure or NEON co-processor.
Complete images and the BSP are available in our download area.
Development is done with the latest Microsoft tools like Visual Studio 2015 (C, C++, C# or VB.NET) and Expression Blend 5.
Interfaces like I²C, CAN or SPI can be used in the same way like a RS232 interface.
XAML for Windows Embedded helps to separate visualisation and program the easy way.

Our FailSafe Flash File System F3S is also available in Compact 2013.

Windows Embedded Compact 7

Windows Embedded Compact 7 offers Bootloader, interface drivers and kernel (with e.g. Silverlight, Mediaplayer or IE). Interface drivers for almost every offered interface are ready to use. Hard work with PlatformBuilder is unnecessary, since we already did that. Create your software with Visual Studio .NET in C, C++, C# or VB.NET. Use interfaces like I²C in the same way like a RS232 interface, without having to handle the underlying hardware. Configure the display and other settings with the F&S configuration tool. This is software development at its easiest.

Windows Embedded Features for Vybrid

General

Feature Description Vybrid WEC 2013
.NET Support Library to easily access DIO, CAN, I²C and SPI from .NET Compact Framework ✔ ✔
AnalogIn Stream driver to easily access the analog inputs ✔ ✔
Audio Codec Support for Microphone, LineIn and LineOut.
Implements Mixer interface and special F&S mixer control panel applet to easily change settings.		 ✔ ✔
BusEnum2 Support for asynchronous loading of drivers. Use events to start loading of drivers.  ✔ ✔
Broadcast Stream driver
Boards can be easily identified and configured over LAN connection		 ✔ ✔
CAN Stream driver to easily access CAN interface. Special tool suit to generate traffic or check communication. ✔ ✔
Digital I/O  Stream driver to configure pins as input, output or interrupt.
Possibility to adjust drive strength or enable/disable internal pull-up or pull-down. Settings can be stored pin registry.		 ✔ ✔
Display Display driver can be configured by registry settings without modifying operating system. ✔ ✔
Display Multi-Monitor Support
Adjustable by registry		   ✔
Display 2D software acceleration using NEON co-processor
Multiple overlays with alpha blending 		 ✔ ✔
Display 2D hardware acceleration
3D OpenGL ES 1.1 and 2.0 hardware acceleration
Multiple overlays with alpha blending
Multiple monitor support (incl. 2D acceleration and Video support)		    
Firmware Update Software to update Bootloader and/or operating system from running operating system. ✔ ✔ 
Software Update Program to update application and registry settings from USB stick, SD card or other source.
Includes automatic detection. Can incorporate with Firmware Update		 ✔ ✔
I²C Stream driver
Support for hardware I²C controller (NI2C)
Support for using GPIOs as I²C (I²C)		 ✔ ✔
Keyboard Support for German 0407, Spanish 040A, French 040C, Italy 0410 and English 0409
Matrix keyboard support: Use IO pins for keyboard		 ✔ ✔
SPI Stream driver
Support for hardware SPI controller		 ✔ ✔
Touch Resistive touch driver with virtual key support - Capacitive touch driver for ATMEL EDT and others
Extended USB mouse driver to accept absolute coordinates		 ✔ ✔
USB Host EHCI and OHCI driver ✔ ✔
USB Device   ✔ ✔
KBDHID Extended MS kbdhid - Support for all keys on the keyboard ✔ ✔
MOUTOUCHHID Support for absolute coordinates ✔ ✔
Power Management Support for screen saver and touch activation ✔ ✔
PWM Stream driver ✔ ✔
Video Streaming Filter framework for streaming video over HTTP ✔ ✔
VoIP Voice over IP sample solution ✔  
QT 4.8x Support for QT 4.8. framework. ✔  

File System

Feature Description Vybrid WEC 2013
F&S BinFS Bug fixed BinFS file system for XIP images ✔ ✔
F3S F&S Secure Flash File System
Optimized throughput on all file operations
Wear-Leveling strategies to reduce flash abrasion (including Garbage Collector)
Transaction-based concept already cooperates with a lot of applications  		 ✔ ✔
Filesystem
Filter Driver		 Used to limit access to file system.
Possible restrictions: Move, Delete, Rename		 ✔ ✔
Filesystem Redirect Driver Redirects file system access from one directory to another. ✔ ✔
FAT/TFAT Microsoft Windows Embedded FAT/TFAT solution. ✔ ✔
NAND Driver 16 bit hardware ECC ✔ ✔

Services

Feature Description Vybrid WEC 2013
Telnet Server Enabled by default. Easy access to command shell. ✔ ✔
FTP Server   ✔ ✔
HTTPD Server Use device as web server. Create ISAPI extensions in C/C++. HTTPD DirectShow stream filter (i.e. camera) ✔ ✔
OpenSSH Offers SSH server functionality for Windows Embedded. Based on OpenSSH
SFTP
SCP
SMTP		 ✔ ✔
SSH SCP/SFTP server SSH Library (also used from SMTP).  ✔ ✔
SMTP SMTP library to send EMail ✔ ✔

Tools

Feature Description Vybrid WEC 2013
Bootscreen Showing custom image during boot. ✔ ✔
Control Panel Standard Windows Embedded Control Panel with additional tools. ✔ ✔
CE Remote Display Driver and application to access desktop of device remotely. ✔ ✔
ndcucfg Command line configuration tool.
Can be used locally, over Telnet connection and over serial connection.
Registry editing
Reading/writing of boot loaders and splash screen
User administration
Certificate administration
....
Usage:
* Can be used in own applications as DLL.
* As a command line tool from telnet or serial debug console		 ✔ ✔
Update tool Update of boot loader
Update on WinCE image
Registry changes
Update of user application
Runs from SD/USB/LAN		 ✔ ✔
F&S 2D control utility Control panel applet
Change 2D acceleration on the fly		 ✔ ✔
F&S Board Config Control panel applet
Check hardware revision, version of boot loader, version of WinCE image and much more.
Change system startup and registry.		 ✔ ✔
F&S Audio Mixer Control panel applet
Change audio features like volume, bass, treble, input ...		 ✔ ✔
F&S SSH/SMTP control utility Control panel applet
Start stop SSHD service
Send test EMail by SMTP		 ✔ ✔
F&S USB Loader Uses USB device connection to update Bootloader, operating system, boot screen, configuration information, partition information.
Can be used to update software or to automate production.		 ✔ ✔
F&S Mfg Tool Modified NXP Tool for board bring up and software installation ✔ ✔

NetDCUA9 - Product Flyer

NetDCUA9 - Hardware


NetDCUA9 - Linux


NetDCUA9 - Windows Embedded CE/Compact


Sorry, there are no files to show.


NetDCUA9 - Miscellaneous


NetDCUA9 - Display

Variants

NetDCUA9-TOP.png NDCUA9-V1I-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, -25°C-+85°C, 5V Supply, Linux Buildroot/Yocto
SKU: NDCUA9-V1I-LIN		 Request  
NetDCUA9-TOP.png NDCUA9-V1I-W13
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, -25°C-+85°C, 5V Supply, Windows Embedded Compact 2013
SKU: NDCUA9-V1I-W13		 Request  
NetDCUA9-TOP.png NDCUA9-V1I-WEC7
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, -25°C-+85°C, 5V Supply, Windows Embedded Compact 7
SKU: NDCUA9-V1I-WEC7		 Request  
NetDCUA9-TOP.png NDCUA9-V2I-W13
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, LVDS, -25°C-+85°C, 5V Versorgung, Windows Embedded Compact 2013
SKU: NDCUA9-V2I-W13		 Request  

Software

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET		 500,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE		 500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN		 500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE		 500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S		 1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows		 500,- €
 

Displays

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15		 120,- €
 

Cable

B.MKAB.23 40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23		 10,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C		 80,- €
 
Adapter RGB to DVI NetDCU/ PicoCOM DVI Adapter
Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen.
SKU: ADP-RGB2DVI		 50,- €
 

Workshops

linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 
linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 

   

High Performance

Many applications in the industrial and medical area demand for a high-performance module to control displays, to connect controlling elements (touch panel, key panel, incremental encoder,...) and to communicate via modern interfaces (Ethernet, USB, CAN, ...). The NetDCU product family meets these conditions since more than 15 years.

Simple Base Board

A special feature of this product family is the possibility to use a simple base board. NetDCUA9 is as far as possible compatible to the other NetDCUs and can be used as an easy upgrade for NetDCU11.2/ 9.2/ 14.

NetDCUA9 is based on a NXP i.MX 6 Cortex-A9 CPU with 1GHz.
Up to 4GB DRAM and 512MB SLC NAND Flash are sufficient to boot a complete WCE or Linux directly from Flash. The system can be set up with an additional SD-Card.

  

Various Interfaces

NetDCUA9 offers interfaces like USB Host/ Device, 2x LAN, RS232, CAN, SPI, I²C, Audio (IN/OUT).
The pin compatible version (to NetDCU11.2/ 9.2/ 14) has a display interface with RGB signals. So displays up to SVGA can be controlled.
An additional version with LVDS interface is possible (max. resolution up to WXGA).
An interface to connect a resisitive touch panel is also available. Capacitive touch panels can be connected via I²C.

Multimedia CPU

The CPU holds functions such as 2D/ 3D, 5 Window Layer, FPU, MPEG4/H264 decoder up to 1080p@60fps, enabling many multimedia applications.

At a power supply of 5V, power consumption is less than 3W, so NetDCUA9 can be operated without a fan or cooling device.

Support

Phone:(0049) 711 123722 0
Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint