phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoCOMA7 Linux/ Windows

Starterkit PicoCOMA7 Linux/ Windows
  299,- €
Tax not included

PicoCOMA7-V1-LIN/-WEC7/-W13, base board, cable kit, access data to documentation and software

With the starter kit, you have the option of connecting external peripherals to the PicoCOMA7 during the development phase. In its form as a plug-in module, it carries all signals to an 80-pin connector.

The base board included in the kit leads all interfaces of the PicoCOMA7 to common sockets or pin headers.

The PicoCOMA7 starter kit contains a PicoCOMA7-V1-LIN / -WEC7 / -W13 with Cortex-A7 CPU, 512MB RAM, 256MB Flash, audio, Ethernet, CAN and resistive touch controller. A boot loader and a Linux / WEC 7 / WEC 2013 kernel are already installed. For test purposes, it is also possible to install a different operating system than the pre-installed one (e.g. WEC7) and thus develop software for the PicoCOMA7.

The starter kit consists of a base board with a PicoCOMA7 and a cable set. The base board offers connection options for the following interfaces: Ethernet, USB host, USB device, 2x RS232, SD card, I²C, SPI, audio (line in, line out) and I / O ports. 5V are required as power supply. The starter kit also includes a 7 "WVGA TFT with resistive touch panel (ET070080) and the matching display adapter with film cable and touch cable. Documentation and software are available in our download area.

We also offer a four-hour workshop. The aim of the workshop is to learn how to use the PicoCOMA7 starter kit and to complete the workshop with an executable system.

PCOMA7 V3 TOP
PCOMA7-V1-LIN/-WEC7/-W13
NXP i.MX 6ULL Cortex-A7, 256MB RAM, 256MB Flash, 1x Ethernet, 1x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux/ Windows Embedded Compact 7/ 2013
SKU: PCOMA7-V1-LIN/-WEC7/-W13

PCOM STARTINTF2 TOP
PicoCOMA5/A9X/A7 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, SD Karte, I²C, SPI, Audio (Line In, Line Out) and E/A-Ports.
SKU: PCOM4-SKIT-FERT1

armStone efus  RGB Kit
Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT

B.MKAB.23
40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23

ET070080 B.LCD.15 Display
7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15