+49(0)711 123722-0
(0)
Starterkit PicoCore™MX8MP Linux
|
|
|
PicoCore™MX8MP-V4I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V4I-LIN
PicoCore™100 Baseboard
To connect USB 3.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), 2x MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT2B
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1
LVDS cable for 7"/10" LVDS Display and PicoCoreMX8MP/MX93
LVDS cable for connecting the 7"/10" LVDS display (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.62
Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT4
Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6
Software
 |
Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS |
500,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Displays
 |
3.5" MIPI-DSI Display with PCAP Touch (long-term available) 3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch) SKU: B.LCD.22 |
80,- € |
Touch Kits
 |
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € | ||
 |
Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C |
Request | ||
Cables
 |
LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53 |
22,- € | ||
 |
30poles Film Cable Film cable, 30pol., 0,5mm, l=100mm for displays To connect our B.LCD.22 display via ADP-MIPI2MIPI1 SKU: B.MKAB.55 |
10,- € | ||
 |
LVDS/MIPI Adapter Cable LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B) SKU: B.MKAB.44 |
22,- € |
Adapters
| MIPI-DSI to LVDS Adapter Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket. SKU: ADP-MIPI2LVDS1 |
25,- € | |||
 |
mPCIe Module with WLAN/BT mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE SKU: ADP-mPCIe-WLAN |
40,- € | ||
 |
Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series Enables conversion of MIPI-DSI (JILI30) to RGB signals. SKU: ADP-MIPI2RGB1 |
30,- € | ||
 |
MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B). SKU: ADP-MIPI2MIPI1 |
25,- € |
Plug Connector
 |
PicoCore™ 100 pins Connector To connect PicoCore™ modules to the base board (20 pcs). SKU: B.MBU.2R100PS.3 |
30,- € |
Workshops
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
|
Secure Boot as a Package Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software. SKU: WS-SBP |
500,- € | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € | ||
 |
SMD Steel Spacer for PicoCore™ Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm) Helps you to connect your PicoCore module to the base board. SKU: B.MSCHR.22 |
70,- € | ||
 |
Patch Antenna Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket. SKU: B.ANT.6 |
3,- € | ||
 |
Heat Sink Finned heat sink to stick on for cooling the CPU SKU: MHS.HS1919.1 |
10,- € | ||
 |
Heat Spreader PicoCore100 Heat spreader for cooling PicoCore boards. SKU: MHS.PC100.1 |
10,- € | ||
 |
Heat Sink PicoCore100 Heat sink for cooling PicoCore boards. SKU: MHS.PC100.2 |
12,- € |
Varianten
 |
PicoCore™MX8MPr2-V2-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V2-LIN |
Request | ||
|
PicoCore™MX8MPr2-V3I-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V3I-LIN |
Request | ||
|
PicoCore™MX8MPr2-V3XI-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V3XI-LIN |
Request | ||
 |
PicoCore™MX8MP-V4I-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V4I-LIN |
Request | ||
|
PicoCore™MX8MPr2-V4XI-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -40°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V4XI-LIN |
Request | ||
|
PicoCore™MX8MP-V5I-W10 NXP i.MX8M Plus Quad 1,6GHz, 4GB DRAM, 32GB eMMC, 1xMIPI-DSI, 1xLVDS, 2xGbit LAN, 2x MIPI-CSI, Audio Codec, RTC, SECO, no WLAN/BT 2x 100pol Stecker, 1x 30pol Stecker -25°C .. +85°C Win 10 IOT LTSC License SKU: PCoreMX8MPr2-V5I-W10 |
Request | ||
Starterkit
|
Starterkit PicoCore™MX8MP Linux NXP i.MX 8MP Evaluation Board PCoreMX8MPr2-V4I-LIN, baseboard, display, cable kit, access data to documentation and software SKU: PCoreMX8MP-SKIT-LIN |
360,- € | ||
|
Starterkit PicoCore™MX8MP Windows 10 IoT NXP i.MX8M Plus with Windows 10 IoT evaluation kit. Includes carrier board, 7" LVDS PCAP display and access to software and documentation. SKU: PCoreMX8MP-SKIT-W |
360,- € |
Yocto Release Y2024.07
For the CPU NXP i.MX8M Plus F&S offers a Yocto based environment. We offer the Linux BSP fsimx8mp-Y2024.07, which is based on Yocto.
Our standard configuration, which is intended to give a first impression of the functionality of the board, includes the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and many more.
The BSP contains the source code packages of U-Boot (2021.04), Linux kernel (based on 5.15.160) and Yocto (4.0.20 Kirkstone) adapted by F&S. Also included is our cross toolchain, some sample applications, and all binaries in the default configuration. Last but not least, detailed documents on the hardware are included, as well as the First Steps documentation for an easy start.
F&S offer a virtual machine (based on VirtualBox) with an installed Linux based on the distribution Fedora 36 for free download. All packages necessary to compile our software are already installed. Also, all services (NFS, TFTP) for working with our boards are installed. Our BSP is unpacked and precompiled in the correct directories. With this virtual machine it doesn't matter if you use Windows or Linux as host. Simply download the VHD, import it into VirtualBox and development can begin immediately.
➜ More information about the new Yocto release Y2024.07
Development start in under an hour
F&S Development Machine - Fedora 36
For a quick start into development with Linux we provide a VirtualBox-based virtual hard disk VHD for download. The VHD uses Fedora 36as Linux distribution.
With this machine you can start your development in less than an hour.
The machine is free of charge for our customers.
VirtualBox is a powerful product for corporate customers and at the same time the only professional solution which is freely available as Open Source Software under the terms of the GNU General Public License Version 2.
The F&S Development Machine contains pre-installed board support packages for fsimx8mm, fsimx8mn and fsimx8mp (64 bit CPU).
The appropriate F&S toolchain is installed in the VHD, the source code is extracted and ready to use.
Necessary system packages and tools are also already installed.
Furthermore, it contains a configured environment for QT development with cross-compile/debug kit, deployment strategy and demo application.
Note: To download the Development Machine, you must be registered on our website.
➜ More information about the F&S Development Machine in the F&S Support Forum
➜ Download F&S Development Machine - Fedora 36
➜ Quickstart Documentation
PicoCoreMX8MP - Product Flyer
- English (1.2 MB, pdf) - 06/05/2022
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
PicoCoreMX8MP - Linux
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- PicoCoreMX8MP Linux First Steps (1.5 MB, pdf) - 06/09/2024
- GPIO Reference Card (349 KB, pdf) - 12/07/2021
- Quickstart with FS Development Machine (1 MB, pdf) - 06/05/2020
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Application Development with Crank (485 KB, pdf) - 28/07/2022
- Application Development with QT (2.1 MB, pdf) - 16/01/2024
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
- How to Write SD Card Image (121 KB, pdf) - 29/03/2021
- DOTNET on F&S Boards (1.1 MB, pdf) - 19/06/2024
- Visual Studio Code C/C++ Application Development (455 KB, pdf) - 29/05/2024
- FreeRTOS on FSiMX8MP Boards (781 KB, pdf) - 23/09/2024
- F&S Support Forum - (external link)
PicoCoreMX8MP - Hardware
- PicoCoreMX8MP/r2 Hardware Documentation (962 KB, pdf) - 17/11/2023
- PicoCoreMX8MP 3D Step Model (1.5 MB, zip) - 09/07/2024
- PicoCoreMX8MPr2 3D Step Model (1.6 MB, zip) - 09/07/2024
- Carrier board PCoreBBDSI Hardware Documentation (2.1 MB, pdf) - 10/01/2023
- Carrier board PCoreBBDSI Schematic (2.9 MB, pdf) - 20/06/2024
- Carrier board PCoreBBDSI Design Files (14 MB, zip) - 25/09/2024
- Carrier board PCoreBBDSI Gerber Files (772 KB, zip) - 09/09/2021
- Carrier board PCoreBBDSI 3D Files (21 MB, zip) - 15/12/2021
- Carrier board PCoreBBDSI Placement (5.7 MB, pdf) - 09/09/2021
Varianten
|
PicoCore™MX8MPr2-V2-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V2-LIN |
Request | ||
|
PicoCore™MX8MPr2-V3I-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V3I-LIN |
Request | ||
|
PicoCore™MX8MPr2-V3XI-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V3XI-LIN |
Request | ||
|
PicoCore™MX8MP-V4I-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V4I-LIN |
Request | ||
|
PicoCore™MX8MPr2-V4XI-LIN NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -40°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS SKU: PCoreMX8MPr2-V4XI-LIN |
Request | ||
|
PicoCore™MX8MP-V5I-W10 NXP i.MX8M Plus Quad 1,6GHz, 4GB DRAM, 32GB eMMC, 1xMIPI-DSI, 1xLVDS, 2xGbit LAN, 2x MIPI-CSI, Audio Codec, RTC, SECO, no WLAN/BT 2x 100pol Stecker, 1x 30pol Stecker -25°C .. +85°C Win 10 IOT LTSC License SKU: PCoreMX8MPr2-V5I-W10 |
Request | ||
Starterkit
|
Starterkit PicoCore™MX8MP Linux NXP i.MX 8MP Evaluation Board PCoreMX8MPr2-V4I-LIN, baseboard, display, cable kit, access data to documentation and software SKU: PCoreMX8MP-SKIT-LIN |
360,- € | ||
|
Starterkit PicoCore™MX8MP Windows 10 IoT NXP i.MX8M Plus with Windows 10 IoT evaluation kit. Includes carrier board, 7" LVDS PCAP display and access to software and documentation. SKU: PCoreMX8MP-SKIT-W |
360,- € |
Link to the Forum
Support finden Sie jederzeit in unserem Forum.
Recent Contributions
|
03 Apr, 15:54 |
How far along is Linux v6.6.x for PicoCores? |
|
03 Apr, 15:52 |
F&S i.MX8M-Mini Yocto Pre Release 2025.04 (fsimx8mm-Y2025.04-pre) |
|
03 Apr, 11:23 |
Custom variant for PicoCoreMX6ULL100 |
|
01 Apr, 11:37 |
Phy link never came up / pcie failed with error -110 |
|
01 Apr, 11:35 |
F&S i.MX8M-Plus Yocto Pre-Release 2025.03 (fsimx8mp-Y2025.03-pre) |
|
24 Mar, 13:17 |
WEC 2013 Firewall FWS0: How to make service start automatically |
|
24 Mar, 11:24 |
Touch |
|
18 Mar, 08:32 |
Unable to build u-boot for PicoCore™MX8MM |
|
11 Mar, 11:43 |
EDMA SAI1 error |
|
10 Mar, 09:50 |
UBIFS "Corrupt empty space": Handling of 0-bits in empty NAND pages |
