phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Menu

Starterkit PicoCore™MX8MP Windows

 

Starterkit PicoCore™MX8MP Windows 10 IoT
  360,- €
Tax not included

NXP i.MX8M Plus with Windows 10 IoT evaluation kit.
Includes carrier board, 7" LVDS PCAP display and access to software and documentation.

Produkt PCore8MPr2-V5I-W10 nicht vorhanden

PCoreBBDSI Rev130 Top
PicoCore™100 Baseboard
To connect USB 2.0 (OTG), SD-Card, Serial, I²C, Ethernet, CAN, mPCIe, Audio (In/ Out/ Mic/ Headphone), MIPI-CSI and MIPI-DSI / LVDS.
SKU: PCoreBBDSI-FERT2B

LCD 7 LVDS 1 front web
7” LVDS Display with PCAP Touch (long-term available)
7” LVDS LCD Display with PCAP Touch
SKU: LCD.7.LVDS.1


LVDS cable for 7"/10" LVDS Display and PicoCoreMX8MP/MX93
LVDS cable for connecting the 7"/10" LVDS display (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.62


Backlight Cable
Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1).
SKU: B.MKAB.35

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT4


MIPI-DSI to DVI Adapter
Enables conversion from MIPI-DSI to DVI.
SKU: ADP-MIPI2DVI1

MHS.PC100.1 Board Oblique
Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1

B.MKUE.5 ASSMANN VR2032N
Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2

Software

software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 

Displays

BLCD22front 3.5" MIPI-DSI Display with PCAP Touch (long-term available)
3.5" TFT (640x480) MIPI-DSI Display with PCAP Touch (TFT-3.5"-MIPI-DSI-PCAP Touch)
SKU: B.LCD.22		 80,- €
 

Touch Kits

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH		 35,- €
 
resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  

Cables

B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 
B.MKAB.23 30poles Film Cable
Film cable, 30pol., 0,5mm, l=100mm for displays
To connect our B.LCD.22 display via ADP-MIPI2MIPI1
SKU: B.MKAB.55		 10,- €
 
B.MKAB LVDS/MIPI Adapter Cable
LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B)
SKU: B.MKAB.44		 22,- €
 

Adapters

MIPI-DSI to LVDS Adapter
Allows the connection of an LVDS display to a starter kit with a 30-pin MIPI-DSI (display) socket.
SKU: ADP-MIPI2LVDS1		 25,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 
ADP MIPI2RGB1 (quer) Adapter board MIPI-DSI (JILI30) to RGB for EDT Unified Series
Enables conversion of MIPI-DSI (JILI30) to RGB signals.
SKU: ADP-MIPI2RGB1		 30,- €
 
ADP MIPI2MIPI1 MIPI-DSI (FFC) to MIPI-DSI (JILI30) Adapter
Enables the conversion of 30pol FFC connections of the 3.5" MIPI Display from F&S to JILI30 (JAE X30HL-B).
SKU: ADP-MIPI2MIPI1 		25,- €
 

Plug Connector

b.mbu.2r280ps.3 PicoCore™ 100 pins Connector
To connect PicoCore™ modules to the base board (20 pcs).
SKU: B.MBU.2R100PS.3		 30,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 
SteelSpacerFamily WA SMSI M2 M2 5 SMD Steel Spacer for PicoCore™
Round SMD steel spacer/ Round Standoff Threaded M2x0.4 Steel 0.059" (1.50mm)
Helps you to connect your PicoCore module to the base board.
SKU: B.MSCHR.22		 70,- €
 
bant6 Patch Antenna
Patch antenna for WLAN/BT (2.4/ 5 GHz) for connection to F&S boards with WLAN/BT antenna socket.
SKU: B.ANT.6		 3,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: MHS.HS1919.1		 10,- €
 
MHS.PC100.1 Board Oblique Heat Spreader PicoCore100
Heat spreader for cooling PicoCore boards.
SKU: MHS.PC100.1		 10,- €
 
B.MKUE.5 ASSMANN VR2032N Heat Sink PicoCore100
Heat sink for cooling PicoCore boards.
SKU: MHS.PC100.2		 12,- €
 

Varianten

PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V2-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V2-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V3I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V3I-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V3XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V3XI-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MP-V4I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V4I-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MPr2-V4XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -40°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V4XI-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MP-V5I-W10
NXP i.MX8M Plus Quad 1,6GHz, 4GB DRAM, 32GB eMMC, 1xMIPI-DSI, 1xLVDS, 2xGbit LAN, 2x MIPI-CSI, Audio Codec, RTC, SECO, no WLAN/BT
2x 100pol Stecker, 1x 30pol Stecker
-25°C .. +85°C
Win 10 IOT LTSC License
SKU: PCoreMX8MPr2-V5I-W10		 Request  

Starterkit

PCoreMX8MP V4I TOP Starterkit PicoCore™MX8MP Linux
NXP i.MX 8MP Evaluation Board PCoreMX8MPr2-V4I-LIN, baseboard, display, cable kit, access data to documentation and software
SKU: PCoreMX8MP-SKIT-LIN		 360,- €
 
PCoreMX8MP V4I TOP Starterkit PicoCore™MX8MP Windows 10 IoT
NXP i.MX8M Plus with Windows 10 IoT evaluation kit.
Includes carrier board, 7" LVDS PCAP display and access to software and documentation.
SKU: PCoreMX8MP-SKIT-W		 360,- €
 

PicoCoreMX8MP - Product Flyer

PicoCoreMX8MP - Linux

PicoCoreMX8MP - Hardware

Varianten

PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V2-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 1GB LPDDR4 RAM, 4GB eMMC, 1x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, MIPI-CSI Kamera, Touch, LVDS, 0°C - +70°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V2-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V3I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -20°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V3I-LIN		 Request  
PCoreMX8MP V4I TOP klein PicoCore™MX8MPr2-V3XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x 100/1000Mb Ethernet, Audio Line In/ Out/ Mic/ Headphone , PCIe, 2x MIPI-CSI Kamera, Touch, DVI, -40°C - +85°C, 3.8V to 5.5VDC Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V3XI-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MP-V4I-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -20°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V4I-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MPr2-V4XI-LIN
NXP i.MX 8M Plus ARM Cortex-A53 + Cortex-M7, 2GB LPDDR4 RAM, 8GB eMMC 2k EEPROM, 2x Gigabit Ethernet, Audio, WLAN, BT, PCIe, MIPI-CSI Camera, Touch, LVDS, MIPI-DSI, -40°C - +85°C, 3.8V Supply, Linux Buildroot/ Yocto, FreeRTOS
SKU: PCoreMX8MPr2-V4XI-LIN		 Request  
PCoreMX8MP V4I TOP PicoCore™MX8MP-V5I-W10
NXP i.MX8M Plus Quad 1,6GHz, 4GB DRAM, 32GB eMMC, 1xMIPI-DSI, 1xLVDS, 2xGbit LAN, 2x MIPI-CSI, Audio Codec, RTC, SECO, no WLAN/BT
2x 100pol Stecker, 1x 30pol Stecker
-25°C .. +85°C
Win 10 IOT LTSC License
SKU: PCoreMX8MPr2-V5I-W10		 Request  

Starterkit

PCoreMX8MP V4I TOP Starterkit PicoCore™MX8MP Linux
NXP i.MX 8MP Evaluation Board PCoreMX8MPr2-V4I-LIN, baseboard, display, cable kit, access data to documentation and software
SKU: PCoreMX8MP-SKIT-LIN		 360,- €
 
PCoreMX8MP V4I TOP Starterkit PicoCore™MX8MP Windows 10 IoT
NXP i.MX8M Plus with Windows 10 IoT evaluation kit.
Includes carrier board, 7" LVDS PCAP display and access to software and documentation.
SKU: PCoreMX8MP-SKIT-W		 360,- €
 

Link to the Forum

Support finden Sie jederzeit in unserem Forum.

Recent Contributions

16 Oct, 07:57

 Wifi doesn't work.

10 Oct, 13:20

 Reset reason in U-Boot

02 Oct, 07:09

 Linux UART_B

01 Oct, 07:25

 How to ping your F&S Board

30 Sep, 12:54

 Display Configuration in U-Boot

30 Sep, 12:16

 Display and Touch Support

30 Sep, 11:58

 Kernel downstream merge/patch strategy of F&S

28 Sep, 13:29

 New documentation "OSM Implementation Guide"

27 Sep, 12:19

 Device tree GPIO

24 Sep, 08:45

 Remote Debugging a WPF application in Visual Studio

Windows 10/11 IoT Enterprise

Windows IoT Enterprise provides full Windows applications in a compact form factor and offers a cost-effective, energy-efficient solution ideal for compact and fanless devices. This solution is perfect for various applications, from industrial systems to AI applications.

Long-term Operating System Support

A key feature of Windows IoT Enterprise is its long-term operating system support (LTSC). This version offers optional support for up to 10 years, ensuring a stable and reliable platform for your devices.

Extensive Ecosystem

With Windows IoT Enterprise, you can access thousands of existing apps and leverage a vast ecosystem. Use your existing C# .Net applications and continue to develop them.

Future Enhancements

Future versions of Windows IoT Enterprise will support GPU acceleration for Chrome/Edge, WPF applications, and video playback optimizations.

Security and Protection

Take advantage of enterprise-grade device management tools to keep your devices up to date and running reliably. Features such as Secure Boot and over-the-air updates are integrated to protect your devices and ensure they are always up to date.

Multi-Cloud Connectivity

Windows IoT Enterprise enables multi-cloud connectivity, allowing seamless integration and management of your devices across various cloud environments.

Contact Us

For more information on the features and availability of Windows IoT Enterprise on F&S modules, please check our support forum or feel free to contact us.

Support

Phone:(+49)(0)711 123722-0
Fax:(+49)(0)711 123722-99

Info: info@fs-net.de
Sales: sales@fs-net.de
Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Address

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
D-70569 Stuttgart

Contact us
Privacy policy |  Disclaimer |  Imprint |  GTC |  Ordering hint