phonenumber +49(0)711 123722-0
|
DE EN

Starterkit PicoCOMA9X Windows

 

Starterkit PicoCOMA9X Windows
  360,- €
Tax not included

PicoCOMA9X-V2-W13/WEC7, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software

Scope of Delivery

PicoCOMA9X TOP WCE
PCOMA9X-V2-W13/WEC7
NXP i.MX 6SoloX Cortex-A9 + Cortex-M4, 512MB RAM, 256MB Flash, 1x Ethernet, 1x CAN, Audio, Touch, RGB, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013 or 7, FreeRTOS
SKU: PCOMA9X-V2-W13/WEC7

PCOM STARTINTF2 TOP
PicoCOMA5/A9X/A7 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, SD Karte, I²C, SPI, Audio (Line In, Line Out) and E/A-Ports.
SKU: PCOM4-SKIT-FERT1

armStone efus  RGB Kit
Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT

starterkit cable kit
Cable Kit
USB Device Cable, Ethernet Cable, RS232 Adapter, Nullmodem Cable, Power Plug and USB Stick with access code to software and documentation (necessary to start the development).
SKU: SINTF-CABKIT

Software

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET
500,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE
500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN
500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE
500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S
1,000,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows
500,- €
 

Display and Display Kit

ET070080 B.LCD.15 Display 7" EDT Display
7" TFT (WVGA) EDT ET070080DH6
SKU: B.LCD.15
120,- €
 
armStone efus  RGB Kit Displaykit RGB
7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable
SKU: NDCU-ADP/TFT-KIT
170,- €
 

Touch Kit

resistive Touch Kit Resistive Touch Kit
For connecting a resistive Touch panel to F&S boards with 4-poles touch connector.
SKU: SINTF-ADP-RESTOUCH
35,- €
 

Cable

B.MKAB.23 40poles Film Cable
Film Cable, A40pol., 0,5mm, l=200mm for displays
To connect a 7" EDT Display (B.LCD.15)
SKU: B.MKAB.23
10,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C
80,- €
 
JTAG Debug Adapter JTAG Debug Adapter
To program Cortex-M4.
SKU: ADP-CMSIS
69,- €
 
Adapter RGB to DVI NetDCU/ PicoCOM DVI Adapter
Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen.
SKU: ADP-RGB2DVI
50,- €
 

Workshop

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1
Request  

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1
20,- €
 
kuehlkoerper Heat Sink
Finned heat sink to stick on for cooling the CPU
SKU: B.MKUE.3
10,- €