+49(0)711 123722-0
(0)
Starterkit PicoCOMA5 Linux
|
|
|
The starterkit offers you the possibility to connect an external periphery with PicoCOMA5 during the phase of development. PicoCOMA5 is a plug-in module and has all signals on a 80pol plug connector.
The kit contains a base board which leads out all PicoCOMA5 interfaces on common sockets or pin strips.
The PicoCOMA5 starterkit contains a PicoCOMA5-V2-LIN with Cortex-A5 & Cortex-M4 CPU, 256MB RAM, 256MB Flash, Audio, Ethernet, CAN and resisitive touch controller. Bootloader and a Linux Image are pre-installed.
The starterkit consists of a base board with a plugged-on PicoCOMA5 and a cable kit. The base board offers connection possibilites for the following interfaces: Ethernet, USB Host, USB Device, 2x RS232, SD Card, I²C, SPI, Audio (Line In, Line Out) and I/ O-Ports. The power supply is 5V. The starterkit comes with a 7" WVGA TFT with resistive touch panel (ET070080) and fitting display adapter with film cable and touch cable. Documentation and software is available online in our download area.
Additionally we can offer you a 4-hour Workshop. Its goal is to learn how to handle the PicoCOMA5 starterkit and to finish the workshop with a running system. Under Linux you learn how to work with Buildroot and other Linux tools.
PCOMA5-V2-LIN
NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot, MQX
SKU: PCOMA5-V2-LIN
PicoCOMA5/A9X/A7 Base Board
Offers connection options for Ethernet, USB Host, USB Device, 2x RS232, SD Karte, I²C, SPI, Audio (Line In, Line Out) and E/A-Ports.
SKU: PCOM4-SKIT-FERT1
Software
 |
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € |
Displays and Display Kit
 |
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | ||
 |
Displaykit RGB 7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable SKU: NDCU-ADP/TFT-KIT |
170,- € |
Touch Kit
 |
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € |
Cables
 |
40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23 |
10,- € |
Adapters
 |
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
 |
JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS |
69,- € | ||
 |
NetDCU/ PicoCOM DVI Adapter Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen. SKU: ADP-RGB2DVI |
50,- € |
Workshop
 |
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
 |
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € |
 |
Starterkit PicoCOMA5 Windows PicoCOMA5-V2-WCE, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-WCE |
299,- € | ||
 |
Starterkit PicoCOMA5 Linux PicoCOMA5-V2-LIN, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-LIN |
299,- € |
Software
|
UpDate Software This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card. SKU: WCE-UPDATE |
500,- € | ||
|
Software .NET Drivers Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++. SKU: WCE-DOTNET |
500,- € | ||
|
Boot Screen Shows the device's user a starting procedure while booting (BMP File). SKU: WCE-BOOTSCREEN |
500,- € | ||
|
Custom Kernel Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added. SKU: WCE-CUSTIMAGE |
500,- € | ||
|
Failsafe Flash Filesystem (F3S) The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing. SKU: WCE-F3S |
1,000,- € | ||
|
Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW |
700,- € | ||
|
Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux |
1,000,- € | ||
|
Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows |
500,- € |
Displays and Display Kit
|
7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15 |
120,- € | ||
|
Displaykit RGB 7" WVGA display with RGB interface and touch panel, as well as the fitting connection cable (40pol film cable), display adapter and touch cable SKU: NDCU-ADP/TFT-KIT |
170,- € |
Touch Kit
|
Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH |
35,- € |
Cables
|
40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23 |
10,- € |
Adapters
|
I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C |
80,- € | ||
|
JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS |
69,- € | ||
|
NetDCU/ PicoCOM DVI Adapter Connects NetDCUA5/ PicoCOMA5/ A9X to a DVI/ HDMI screen. SKU: ADP-RGB2DVI |
50,- € |
Workshop
|
Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1 |
Request | ||
Other Accessories
|
USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1 |
20,- € |
Variants
 |
PCOMA5-V3-W13/WCE NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013 SKU: PCOMA5-V3-W13/WCE |
Request | ||
 |
PCOMA5-V3-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V3-LIN |
Request | ||
|
PCOMA5-V2-W13/WCE NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013, MQX SKU: PCOMA5-V2-W13/WCE |
Request | ||
|
PCOMA5-V2-LIN NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot, MQX SKU: PCOMA5-V2-LIN |
Request | ||
|
PCOMA5-V1-W13/WCE NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013 SKU: PCOMA5-V1-W13/WCE |
Request | ||
|
PCOMA5-V1-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V1-LIN |
Request | ||
|
PCOMA5-V1I-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, -25°C - +85°C, 3.3V Supply, Linux Buildroot/Yocto SKU: PCOMA5-V1I-LIN |
Request | ||
|
PCOMA5-V3I-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, -25°C - +85°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V3I-LIN |
Request | ||
Starterkits
|
Starterkit PicoCOMA5 Windows PicoCOMA5-V2-WCE, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-WCE |
299,- € | ||
|
Starterkit PicoCOMA5 Linux PicoCOMA5-V2-LIN, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-LIN |
299,- € |
Buildroot
The Linux BSP (fsvybrid V2.2) contains the customized Linux Kernel Source Code (v3.0.15), the customized U-Boot Source Code (2014.07) and a customized Buildroot (2016.05), as well as our Cross-Toolchain. The package also holds our standard binaries of the Linux Kernel Images, U-Boot and a UBIFS Root Filesystem. For a first impression, the Root Filesystem based on Buildroot has the following features installed:
Busybox 1.20.x, gdb 6.8, alsa-utils, gstreamer, madplay, directFB, fbv, X.Org rel-7.5, Matchbox, feh, X11vnc, openssl, openssh, freetype, glib2, tslib, libv4l, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp
The BSP also contains our First-Step documentation and example applications.
Windows Embedded Lifetime
| Feature | Available until | End of Mainstream Support | End of Extended Support |
| Windows Embedded Compact 2013 | 31.05.2028 | 10.09.2018 | 10.10.2023 |
| Windows Embedded Compact 7 | 28.02.2026 | 12.04.2016 | 13.04.2021 |
| Windows CE 6.0 | 28.02.2022 | 09.04.2013 | 10.04.2018 |
Windows Embedded Compact 2013
As the very first company we can offer WEC 2013 for Vybrid processors.
The highly flexible and hard real-time operating system has kernel, interface drivers and bootloader. It benefits from all the features of a modern CPU, such as ARMv7 THUMB2 command structure or NEON co-processor.
Complete images and the BSP are available in our download area.
Development is done with the latest Microsoft tools like Visual Studio 2015 (C, C++, C# or VB.NET) and Expression Blend 5.
Interfaces like I²C, CAN or SPI can be used in the same way like a RS232 interface.
XAML for Windows Embedded helps to separate visualisation and program the easy way.
Our FailSafe Flash File System F3S is also available in Compact 2013.
Windows Embedded CE 6.0 R3
Windows Embedded CE 6.0 R3 offers bootloaders, interface drivers and kernels (with e.g. Silverlight or IE).
The interface drivers of almost every offered interface are already ready to use.
Your software can be created with Visual Studio .NET in the languages C, C++, C# or VB.NET.
Interfaces like I²C can be used in the same manner like a RS232 interface, without having to handle the underlying hardware.
Display and other settings are arranged with the F&S configuration tool.
Windows Embedded Features for Vybrid
General
| Feature | Description | Vybrid | WEC 2013 |
| .NET Support | Library to easily access DIO, CAN, I²C and SPI from .NET Compact Framework | ✔ | ✔ |
| AnalogIn | Stream driver to easily access the analog inputs | ✔ | ✔ |
| Audio Codec | Support for Microphone, LineIn and LineOut. Implements Mixer interface and special F&S mixer control panel applet to easily change settings. |
✔ | ✔ |
| BusEnum2 | Support for asynchronous loading of drivers. Use events to start loading of drivers. | ✔ | ✔ |
| Broadcast | Stream driver Boards can be easily identified and configured over LAN connection |
✔ | ✔ |
| CAN | Stream driver to easily access CAN interface. Special tool suit to generate traffic or check communication. | ✔ | ✔ |
| Digital I/O | Stream driver to configure pins as input, output or interrupt. Possibility to adjust drive strength or enable/disable internal pull-up or pull-down. Settings can be stored pin registry. |
✔ | ✔ |
| Display | Display driver can be configured by registry settings without modifying operating system. | ✔ | ✔ |
| Display | Multi-Monitor Support Adjustable by registry |
✔ | |
| Display | 2D software acceleration using NEON co-processor Multiple overlays with alpha blending |
✔ | ✔ |
| Display | 2D hardware acceleration 3D OpenGL ES 1.1 and 2.0 hardware acceleration Multiple overlays with alpha blending Multiple monitor support (incl. 2D acceleration and Video support) |
||
| Firmware Update | Software to update Bootloader and/or operating system from running operating system. | ✔ | ✔ |
| Software Update | Program to update application and registry settings from USB stick, SD card or other source. Includes automatic detection. Can incorporate with Firmware Update |
✔ | ✔ |
| I²C | Stream driver Support for hardware I²C controller (NI2C) Support for using GPIOs as I²C (I²C) |
✔ | ✔ |
| Keyboard | Support for German 0407, Spanish 040A, French 040C, Italy 0410 and English 0409 Matrix keyboard support: Use IO pins for keyboard |
✔ | ✔ |
| SPI | Stream driver Support for hardware SPI controller |
✔ | ✔ |
| Touch | Resistive touch driver with virtual key support - Capacitive touch driver for ATMEL EDT and others Extended USB mouse driver to accept absolute coordinates |
✔ | ✔ |
| USB Host | EHCI and OHCI driver | ✔ | ✔ |
| USB Device | ✔ | ✔ | |
| KBDHID | Extended MS kbdhid - Support for all keys on the keyboard | ✔ | ✔ |
| MOUTOUCHHID | Support for absolute coordinates | ✔ | ✔ |
| Power Management | Support for screen saver and touch activation | ✔ | ✔ |
| PWM | Stream driver | ✔ | ✔ |
| Video Streaming | Filter framework for streaming video over HTTP | ✔ | ✔ |
| VoIP | Voice over IP sample solution | ✔ | |
| QT 4.8x | Support for QT 4.8. framework. | ✔ |
File System
| Feature | Description | Vybrid | WEC 2013 |
| F&S BinFS | Bug fixed BinFS file system for XIP images | ✔ | ✔ |
| F3S | F&S Secure Flash File System Optimized throughput on all file operations Wear-Leveling strategies to reduce flash abrasion (including Garbage Collector) Transaction-based concept already cooperates with a lot of applications |
✔ | ✔ |
| Filesystem Filter Driver |
Used to limit access to file system. Possible restrictions: Move, Delete, Rename |
✔ | ✔ |
| Filesystem Redirect Driver | Redirects file system access from one directory to another. | ✔ | ✔ |
| FAT/TFAT | Microsoft Windows Embedded FAT/TFAT solution. | ✔ | ✔ |
| NAND Driver | 16 bit hardware ECC | ✔ | ✔ |
Services
| Feature | Description | Vybrid | WEC 2013 |
| Telnet Server | Enabled by default. Easy access to command shell. | ✔ | ✔ |
| FTP Server | ✔ | ✔ | |
| HTTPD Server | Use device as web server. Create ISAPI extensions in C/C++. HTTPD DirectShow stream filter (i.e. camera) | ✔ | ✔ |
| OpenSSH | Offers SSH server functionality for Windows Embedded. Based on OpenSSH SFTP SCP SMTP |
✔ | ✔ |
| SSH SCP/SFTP server | SSH Library (also used from SMTP). | ✔ | ✔ |
| SMTP | SMTP library to send EMail | ✔ | ✔ |
Tools
| Feature | Description | Vybrid | WEC 2013 |
| Bootscreen | Showing custom image during boot. | ✔ | ✔ |
| Control Panel | Standard Windows Embedded Control Panel with additional tools. | ✔ | ✔ |
| CE Remote Display | Driver and application to access desktop of device remotely. | ✔ | ✔ |
| ndcucfg | Command line configuration tool. Can be used locally, over Telnet connection and over serial connection. Registry editing Reading/writing of boot loaders and splash screen User administration Certificate administration .... Usage: * Can be used in own applications as DLL. * As a command line tool from telnet or serial debug console |
✔ | ✔ |
| Update tool | Update of boot loader Update on WinCE image Registry changes Update of user application Runs from SD/USB/LAN |
✔ | ✔ |
| F&S 2D control utility | Control panel applet Change 2D acceleration on the fly |
✔ | ✔ |
| F&S Board Config | Control panel applet Check hardware revision, version of boot loader, version of WinCE image and much more. Change system startup and registry. |
✔ | ✔ |
| F&S Audio Mixer | Control panel applet Change audio features like volume, bass, treble, input ... |
✔ | ✔ |
| F&S SSH/SMTP control utility | Control panel applet Start stop SSHD service Send test EMail by SMTP |
✔ | ✔ |
| F&S USB Loader | Uses USB device connection to update Bootloader, operating system, boot screen, configuration information, partition information. Can be used to update software or to automate production. |
✔ | ✔ |
| F&S Mfg Tool | Modified NXP Tool for board bring up and software installation | ✔ | ✔ |
PicoCOMA5 - Product Flyer
- Deutsch (606 KB, pdf) - 04/02/2016
- English (551 KB, pdf) - 04/02/2016
- Customer Specific Boards (93 KB, pdf) - 20/09/2017
PicoCOMA5 - Hardware
- PicoCOMA5 Hardware Documentation (399 KB, pdf) - 20/05/2021
- PicoCOMA5 Starterkit Hardware Documentation (422 KB, pdf) - 23/01/2015
- Starterkit Circuit (74 KB, pdf) - 18/01/2012
- Starterkit Mounting (80 KB, pdf) - 01/12/2008
- Starterkit Bill of Material (7.8 KB, pdf) - 08/06/2009
- Pin Assignment List (5.2 MB, pdf) - 04/06/2013
- Ethernet Routing Guidelines (55 KB, pdf) - 20/09/2011
- 3D Step Model (23 MB, zip) - 01/03/2017
PicoCOMA5 - Linux
- PicoCOMA5 Linux First Steps (2.6 MB, pdf) - 05/12/2016
- Linux - GPIO Reference Card (102 KB, pdf) - 22/11/2013
- Advice for Linux on PC (2 MB, pdf) - 10/01/2018
- Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022
- Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
- Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
PicoCOMA5 - Windows Embedded CE/Compact
- PicoCOMA5 First Steps (2 MB, pdf) - 30/09/2014
- Device Driver (1.8 MB, pdf) - 10/04/2019
- CAN Device Driver (967 KB, pdf) - 23/03/2015
- I2C Device Drivers I2C+NI2C (393 KB, pdf) - 13/01/2017
- Native SPI Device Driver (2.2 MB, pdf) - 13/03/2013
- FTP Server Configuration (15 KB, pdf) - 30/12/2004
- TCP/IP Parameter (37 KB, pdf) - 30/12/2004
Sorry, there are no files to show.
Sorry, there are no files to show.
PicoCOMA5 - Display
- Display - Pin Assignment (1.5 MB, pdf) - 07/03/2012
- Display Settings from Datasheet (11 KB, pdf) - 19/11/2009
- Display - Drivers
-
- GKCY43SNAH2E0, 480x272 Pixel (1.4 KB, txt) - 04/02/2014
- J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 04/02/2014
- J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 10/02/2014
- COM43H4M10XTC, 480x272 Pixel (773 bytes, txt) - 09/09/2014
- DLC1040AMG-3, 800x600 Pixel (1.1 KB, txt) - 17/01/2014
- Endrich-J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 22/05/2014
- Endrich-J035QVTC0401, 320x240 Pixel (1.4 KB, txt) - 22/05/2014
- Endrich-J043WQTC0301, 480x272 Pixel (1.4 KB, txt) - 22/05/2014
- ET070080, 800x480 Pixel (689 bytes, txt) - 30/07/2013
- ET070080, 800x480 Pixel (689 bytes, txt) - 19/08/2013
- ET070080, 800x480 Pixel (637 bytes, txt) - 22/08/2013
- MI0570ET-2, 640x480 Pixel (750 bytes, txt) - 28/05/2014
- MI0570ET-2, 640x480 Pixel (912 bytes, txt) - 28/05/2014
- NL6448BC33-70, 640x480 Pixel (779 bytes, txt) - 16/09/2014
- YTS700RLAB-01, 800x480 Pixel (1.1 KB, txt) - 02/09/2014
- CHIMEI
- CHIMEI G070Y2, 800x480 Pixel (1.1 KB, txt) - 22/05/2014
- EDT
- EDT ET070080, 800x480 Pixel (1.4 KB, txt) - 26/09/2013
- EDT ET035080, 320x240 Pixel (1.1 KB, txt) - 18/09/2014
- EDT ET035080, 320x240 Pixel (1.1 KB, txt) - 08/09/2014
- EDT ET050080, 800x480 Pixel (1.1 KB, txt) - 14/05/2014
- EDT ET070080DH6, 800x480 Pixel (1.1 KB, txt) - 26/06/2014
- EDT ETM070080, 800x480 Pixel (1.1 KB, txt) - 22/05/2014
- EDT ETM070080, 800x480 Pixel (1.1 KB, txt) - 09/05/2014
- Endrich
- Endrich J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 04/02/2014
- Endrich J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 27/05/2014
- Endrich J070WVTC0601, 800x480 Pixel (1.5 KB, txt) - 04/09/2014
- Endrich J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 27/05/2014
- Evervision
- Evervision VGG804809, 800x480 Pixel (1.1 KB, txt) - 05/12/2013
- Hitachi
- InnoLux
- InnoLux G057VGE, 640x480 Pixel (752 bytes, txt) - 04/07/2014
- KOE
- KOE TX14D14VM1BPB, 640x480 Pixel (756 bytes, txt) - 28/05/2014
- Kyocera
- Kyocera TCG057VG, 640x480 Pixel (1.1 KB, txt) - 07/04/2014
Variants
|
PCOMA5-V3-W13/WCE NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013 SKU: PCOMA5-V3-W13/WCE |
Request | ||
|
PCOMA5-V3-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V3-LIN |
Request | ||
|
PCOMA5-V2-W13/WCE NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013, MQX SKU: PCOMA5-V2-W13/WCE |
Request | ||
|
PCOMA5-V2-LIN NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 256MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot, MQX SKU: PCOMA5-V2-LIN |
Request | ||
|
PCOMA5-V1-W13/WCE NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Windows Embedded Compact 2013 SKU: PCOMA5-V1-W13/WCE |
Request | ||
|
PCOMA5-V1-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V1-LIN |
Request | ||
|
PCOMA5-V1I-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, -25°C - +85°C, 3.3V Supply, Linux Buildroot/Yocto SKU: PCOMA5-V1I-LIN |
Request | ||
|
PCOMA5-V3I-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, -25°C - +85°C, 3.3V Supply, Linux Buildroot SKU: PCOMA5-V3I-LIN |
Request | ||
Starterkits
|
Starterkit PicoCOMA5 Windows PicoCOMA5-V2-WCE, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-WCE |
299,- € | ||
|
Starterkit PicoCOMA5 Linux PicoCOMA5-V2-LIN, base board, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, access data to documentation and software SKU: PCOMA5-SKIT-LIN |
299,- € |
Link to the Forum
You will always find support in our Forum.
Recent Contributions
|
24 Mar, 13:17 |
WEC 2013 Firewall FWS0: How to make service start automatically |
|
24 Mar, 11:24 |
Touch |
|
18 Mar, 14:57 |
Phy link never came up / pcie failed with error -110 |
|
18 Mar, 09:04 |
How far along is Linux v6.6.x for PicoCores? |
|
18 Mar, 08:32 |
Unable to build u-boot for PicoCore™MX8MM |
|
11 Mar, 11:43 |
EDMA SAI1 error |
|
10 Mar, 09:50 |
UBIFS "Corrupt empty space": Handling of 0-bits in empty NAND pages |
|
27 Feb, 08:12 |
Fedora 36 - Buildroot fsimx6-B2024.04 - steps to enable or install USB Video Class (UVC) drivers for USB camera |
|
21 Feb, 12:19 |
How to Enable Unified Write Filter (UWF) |
|
13 Feb, 09:10 |
fw_printenv does not work reliable |
