Starterkit armStone™A5 Linux

The armStone™A5 in PicoITX format holds standard connectors for 2x Ethernet, USB Host, USB Device and Audio. Furthermore, a power plug is installed. LVDS display signals are found on a 25pol connector, the alternative RGB display interface is on a 34pol ESCDI interface. Resistive Touch (4-wire) is connected via a 4pol connector and capacitive Touch (I²C) is connected via a 6pol connector. The COM1 interface is on a 10pol connector. All other interfaces can be found on J1.

The armStone™A5 starterkit consists of an armStoneA5-V2-LIN (with 256MB RAM, 128MB Flash, Audio, 2x Ethernet, 2x CAN, 3x Serial, USB Host, USB Device, I²C, SPI, micro-SD Card Slot and resistive Touch controller).
Both, RGB display interface (34pol ESCDI) and the LVDS display interface (25pol socket) are equipped. You can either connect a RGB display or a LVDS display (not simulatenously).

Bootloader and Linux Image are already installed.

The scope of delivery includes an additional cable set, a power plug and an USB stick. On a supplement you can find the access data to documentation and software.

Additionally, we offer a 4-hour Workshop. The goal of the workshop is, to learn how to handle the armStone™A5 starterkit and completing it with a running system. Under Linux you learn how to deal with Buildroot and further Linux tools.

aStoneA5-V2-LIN
NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot, MQX
SKU: aStoneA5-V2-LIN

Display Adapter Board to EDT Unified Series
Helps to connect a 7" WVGA display by EDT (ET070080DH6/B.LCD.15) with RGB interface and resistive touch panel
SKU: aSt-ADP-EDT1

7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15

Cable Kit

SKU: SINTF-CABKIT

Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3

Accessories

	USB Stick USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards. SKU: USBSTICK.1	20,- €
	Displaykit RGB 2 7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable SKU: aSt-RGBKIT	170,- €
	armStone™ Extension Routes interfaces of the 66pin feature connector to standard connectors. SKU: aStone-ADP-UNI1	130,- €
	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS	69,- €
	Display Adapter Board to EDT Unified Series Helps to connect a 7" WVGA display by EDT (ET070080DH6/B.LCD.15) with RGB interface and resistive touch panel SKU: aSt-ADP-EDT1	50,- €
	armStone™/ efus™/ PicoCore™ DVI Adapter Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen. SKU: aStone-ADP-DVI	50,- €
	7" RGB Display with resistive Touch 7" TFT (800x480) EDT ET070080DH6 SKU: B.LCD.15	120,- €
	Workshops Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot SKU: NDCU-WS1	Request
	7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18	150,- €
	50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41	10,- €
	Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB	210,- €
	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €

	Starterkit armStone™A5 Windows armStoneA5-V2-W13, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-W13	179,- €
	Starterkit armStone™A5 Linux armStoneA5-V2-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-LIN	179,- €

Software

	Display Customization (MIPI-DSI Display under Linux) Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board. The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display. SKU: EW-SW-MIPI-DSI-Linux	1,000,- €
	Display Customization (RGB or LVDS display under Linux) Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board. The DeviceTree contains the appropriate entries for your display. SKU: EW-SW	700,- €
	Secure Boot as a Service The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme. SKU: Linux-SBS	500,- €
	Display Customization (RGB orLVDS Display under Windows) Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board. SKU: EW-SW-RGB-LVDS-Windows	500,- €

Displays and Displaykit

	7" RGB Display with PCAP Touch 7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch SKU: B.LCD.18	150,- €
	Displaykit 7" RGB - PCAP Touch 7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter. SKU: KIT-TFT-7RGB	210,- €
	7” LVDS Display with PCAP Touch (long-term available) 7” LVDS LCD Display with PCAP Touch SKU: LCD.7.LVDS.1	95,- €
	10” LVDS Display with PCAP Touch (long-term available) 10” LVDS LCD Display with PCAP Touch SKU: LCD.10.LVDS.1	130,- €

Touch-Kits

	Resistive Touch Kit For connecting a resistive Touch panel to F&S boards with 4-poles touch connector. SKU: SINTF-ADP-RESTOUCH	35,- €
	Resistive Touch Kit 2 For the connection of a resistive touch panel to boards with 6pol Hirose socket. SKU: SINTF-ADP-RTI2C	Request
	PCAP Touch Kit for EDT Kit to connect an EDT PCAP touch panel SKU: ADP-EDTTOUCH2	35,- €

Cable

	40poles Film Cable Film Cable, A40pol., 0,5mm, l=200mm for displays To connect a 7" EDT Display (B.LCD.15) SKU: B.MKAB.23	10,- €
	50poles Film Cable Cable for 7" RGB Endrich Display (B.LCD.18) FFC cable, A50pol., pitch=0,5mm, l=200mm SKU: B.MKAB.41	10,- €
	LVDS/MIPI Adapter Cable LVDS/MIPI cable with two 30pin connectors each (JAE X30HL-B to JAE X30HL-B) SKU: B.MKAB.44	22,- €
	Capacitive Touch Cable 6-pin cable with matching connector for connecting an I2C touch to F&S boards SKU: B.MKAB.47	10,- €
	LVDS Cable LVDS cable with JAE FI X30 on one side and open ends on the other side SKU: B.MKAB.53	22,- €
	Backlight Cable Backlight cable for connecting the 7"/10" LVDS displays (LCD.7.LVDS.1 and LCD.10.LVDS.1). SKU: B.MKAB.35	7,- €

Adapters

	I2C Erweiterung Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus. SKU: NDCU-ADP/I2C	80,- €
	armStone™ Extension Routes interfaces of the 66pin feature connector to standard connectors. SKU: aStone-ADP-UNI1	130,- €
	JTAG Debug Adapter To program Cortex-M4. SKU: ADP-CMSIS	69,- €
	Display Adapter Board to EDT Unified Series Helps to connect a 7" WVGA display by EDT (ET070080DH6/B.LCD.15) with RGB interface and resistive touch panel SKU: aSt-ADP-EDT1	50,- €
	Adapter for Endrich iSi50 Displays Adapter to connect Endrich iSi50 displays to F&S boards SKU: aSt-ADP-MIT1	50,- €
	Power Adapter To supply armStone™ and PicoCore™ modules with 24V. SKU: ADP-NT24V3	40,- €

Workshops

Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1

Request

Other Accessories

USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1

20,- €

Variants

	aStoneA5-V2-W13 NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013, MQX SKU: aStoneA5-V2-W13	Request
	aStoneA5-V2-LIN NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot, MQX SKU: aStoneA5-V2-LIN	Request
	aStoneA5-V1-W13 NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013 SKU: aStoneA5-V1-W13	Request
	aStoneA5-V1-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot SKU: aStoneA5-V1-LIN	Request
	aStoneA5-V1-WEC7 NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 7 SKU: aStoneA5-V1-WEC7	Request

Starterkits

	Starterkit armStone™A5 Windows armStoneA5-V2-W13, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-W13	179,- €
	Starterkit armStone™A5 Linux armStoneA5-V2-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-LIN	179,- €

Buildroot

The Linux BSP (fsvybrid V2.2) contains the customized Linux Kernel Source Code (v3.0.15), the customized U-Boot Source Code (2014.07) and a customized Buildroot (2016.05), as well as our Cross-Toolchain. The package also holds our standard binaries of the Linux Kernel Images, U-Boot and a UBIFS Root Filesystem. For a first impression, the Root Filesystem based on Buildroot has the following features installed:

Busybox 1.20.x, gdb 6.8, alsa-utils, gstreamer, madplay, directFB, fbv, X.Org rel-7.5, Matchbox, feh, X11vnc, openssl, openssh, freetype, glib2, tslib, libv4l, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp

The BSP also contains our First-Step documentation and example applications.

➜ More information about BSP release V2.2

Windows Embedded Lifetime

Feature	Available until	End of Mainstream Support	End of Extended Support
Windows Embedded Compact 2013	31.05.2028	10.09.2018	10.10.2023
Windows Embedded Compact 7	28.02.2026	12.04.2016	13.04.2021
Windows CE 6.0	28.02.2022	09.04.2013	10.04.2018

Windows Embedded Compact 2013

As the very first company we can offer WEC 2013 for Vybrid processors.
The highly flexible and hard real-time operating system has kernel, interface drivers and bootloader. It benefits from all the features of a modern CPU, such as ARMv7 THUMB2 command structure or NEON co-processor.
Complete images and the BSP are available in our download area.
Development is done with the latest Microsoft tools like Visual Studio 2015 (C, C++, C# or VB.NET) and Expression Blend 5.
Interfaces like I²C, CAN or SPI can be used in the same way like a RS232 interface.
XAML for Windows Embedded helps to separate visualisation and program the easy way.

Our FailSafe Flash File System F3S is also available in Compact 2013.

Windows Embedded Features for Vybrid

General

Feature	Description	Vybrid	WEC 2013
.NET Support	Library to easily access DIO, CAN, I²C and SPI from .NET Compact Framework	✔	✔
AnalogIn	Stream driver to easily access the analog inputs	✔	✔
Audio Codec	Support for Microphone, LineIn and LineOut. Implements Mixer interface and special F&S mixer control panel applet to easily change settings.	✔	✔
BusEnum2	Support for asynchronous loading of drivers. Use events to start loading of drivers.	✔	✔
Broadcast	Stream driver Boards can be easily identified and configured over LAN connection	✔	✔
CAN	Stream driver to easily access CAN interface. Special tool suit to generate traffic or check communication.	✔	✔
Digital I/O	Stream driver to configure pins as input, output or interrupt. Possibility to adjust drive strength or enable/disable internal pull-up or pull-down. Settings can be stored pin registry.	✔	✔
Display	Display driver can be configured by registry settings without modifying operating system.	✔	✔
Display	Multi-Monitor Support Adjustable by registry		✔
Display	2D software acceleration using NEON co-processor Multiple overlays with alpha blending	✔	✔
Display	2D hardware acceleration 3D OpenGL ES 1.1 and 2.0 hardware acceleration Multiple overlays with alpha blending Multiple monitor support (incl. 2D acceleration and Video support)
Firmware Update	Software to update Bootloader and/or operating system from running operating system.	✔	✔
Software Update	Program to update application and registry settings from USB stick, SD card or other source. Includes automatic detection. Can incorporate with Firmware Update	✔	✔
I²C	Stream driver Support for hardware I²C controller (NI2C) Support for using GPIOs as I²C (I²C)	✔	✔
Keyboard	Support for German 0407, Spanish 040A, French 040C, Italy 0410 and English 0409 Matrix keyboard support: Use IO pins for keyboard	✔	✔
SPI	Stream driver Support for hardware SPI controller	✔	✔
Touch	Resistive touch driver with virtual key support - Capacitive touch driver for ATMEL EDT and others Extended USB mouse driver to accept absolute coordinates	✔	✔
USB Host	EHCI and OHCI driver	✔	✔
USB Device		✔	✔
KBDHID	Extended MS kbdhid - Support for all keys on the keyboard	✔	✔
MOUTOUCHHID	Support for absolute coordinates	✔	✔
Power Management	Support for screen saver and touch activation	✔	✔
PWM	Stream driver	✔	✔
Video Streaming	Filter framework for streaming video over HTTP	✔	✔
VoIP	Voice over IP sample solution	✔
QT 4.8x	Support for QT 4.8. framework.	✔

File System

Feature	Description	Vybrid	WEC 2013
F&S BinFS	Bug fixed BinFS file system for XIP images	✔	✔
F3S	F&S Secure Flash File System Optimized throughput on all file operations Wear-Leveling strategies to reduce flash abrasion (including Garbage Collector) Transaction-based concept already cooperates with a lot of applications	✔	✔
Filesystem Filter Driver	Used to limit access to file system. Possible restrictions: Move, Delete, Rename	✔	✔
Filesystem Redirect Driver	Redirects file system access from one directory to another.	✔	✔
FAT/TFAT	Microsoft Windows Embedded FAT/TFAT solution.	✔	✔
NAND Driver	16 bit hardware ECC	✔	✔

Services

Feature	Description	Vybrid	WEC 2013
Telnet Server	Enabled by default. Easy access to command shell.	✔	✔
FTP Server		✔	✔
HTTPD Server	Use device as web server. Create ISAPI extensions in C/C++. HTTPD DirectShow stream filter (i.e. camera)	✔	✔
OpenSSH	Offers SSH server functionality for Windows Embedded. Based on OpenSSH SFTP SCP SMTP	✔	✔
SSH SCP/SFTP server	SSH Library (also used from SMTP).	✔	✔
SMTP	SMTP library to send EMail	✔	✔

Tools

Feature	Description	Vybrid	WEC 2013
Bootscreen	Showing custom image during boot.	✔	✔
Control Panel	Standard Windows Embedded Control Panel with additional tools.	✔	✔
CE Remote Display	Driver and application to access desktop of device remotely.	✔	✔
ndcucfg	Command line configuration tool. Can be used locally, over Telnet connection and over serial connection. Registry editing Reading/writing of boot loaders and splash screen User administration Certificate administration .... Usage: * Can be used in own applications as DLL. * As a command line tool from telnet or serial debug console	✔	✔
Update tool	Update of boot loader Update on WinCE image Registry changes Update of user application Runs from SD/USB/LAN	✔	✔
F&S 2D control utility	Control panel applet Change 2D acceleration on the fly	✔	✔
F&S Board Config	Control panel applet Check hardware revision, version of boot loader, version of WinCE image and much more. Change system startup and registry.	✔	✔
F&S Audio Mixer	Control panel applet Change audio features like volume, bass, treble, input ...	✔	✔
F&S SSH/SMTP control utility	Control panel applet Start stop SSHD service Send test EMail by SMTP	✔	✔
F&S USB Loader	Uses USB device connection to update Bootloader, operating system, boot screen, configuration information, partition information. Can be used to update software or to automate production.	✔	✔
F&S Mfg Tool	Modified NXP Tool for board bring up and software installation	✔	✔

armStoneA5 - Product Flyer

Deutsch (840 KB, pdf) - 12/02/2019
Englisch (841 KB, pdf) - 12/02/2019
Customer Specific Boards (93 KB, pdf) - 20/09/2017

armStoneA5 - Hardware

armStoneA5 Hardware Documentation (1.4 MB, pdf) - 07/09/2021
Freescale NBoot Programming (924 KB, pdf) - 12/10/2015
3D Step-Model (5 MB, zip) - 09/07/2024

armStoneA5 - Linux

armStoneA5 Linux First Steps (2.6 MB, pdf) - 05/12/2016
Advice for Linux on PC (2 MB, pdf) - 10/01/2018
GPIO Reference Card (68 KB, pdf) - 23/02/2014
Steps Required For Creating A Progress Bar In Linux (473 KB, pdf) - 12/07/2019
Linux on F&S Boards (2.9 MB, pdf) - 20/12/2023
Application Development with Eclipse (2.4 MB, pdf) - 18/10/2022

armStoneA5 - Windows Embedded CE/Compact

armStoneA5 First Steps (2 MB, pdf) - 01/10/2014
Device Driver (1.8 MB, pdf) - 10/04/2019
CAN Device Driver (967 KB, pdf) - 23/03/2015
I2C Device Drivers I2C+NI2C (393 KB, pdf) - 13/01/2017
Native SPI Device Driver (2.2 MB, pdf) - 13/03/2013
FTP Server Configuration (15 KB, pdf) - 30/12/2004
TCP/IP Parameter (37 KB, pdf) - 30/12/2004

Sorry, there are no files to show.

armStoneA5 - Display

Display - Pin Assignment (1.5 MB, pdf) - 07/03/2012
Display Settings from Datasheet (11 KB, pdf) - 19/11/2009
Display - Drivers

- GKCY43SNAH2E0, 480x272 Pixel (1.4 KB, txt) - 04/02/2014
- J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 04/02/2014
- J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 10/02/2014
- COM43H4M10XTC, 480x272 Pixel (773 bytes, txt) - 09/09/2014
- DLC1040AMG-3, 800x600 Pixel (1.1 KB, txt) - 17/01/2014
- Endrich-J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 22/05/2014
- Endrich-J035QVTC0401, 320x240 Pixel (1.4 KB, txt) - 22/05/2014
- Endrich-J043WQTC0301, 480x272 Pixel (1.4 KB, txt) - 22/05/2014
- ET070080, 800x480 Pixel (689 bytes, txt) - 30/07/2013
- ET070080, 800x480 Pixel (689 bytes, txt) - 19/08/2013
- ET070080, 800x480 Pixel (637 bytes, txt) - 22/08/2013
- MI0570ET-2, 640x480 Pixel (750 bytes, txt) - 28/05/2014
- MI0570ET-2, 640x480 Pixel (912 bytes, txt) - 28/05/2014
- NL6448BC33-70, 640x480 Pixel (779 bytes, txt) - 16/09/2014
- YTS700RLAB-01, 800x480 Pixel (1.1 KB, txt) - 02/09/2014
CHIMEI

CHIMEI G070Y2, 800x480 Pixel (1.1 KB, txt) - 22/05/2014

EDT ET070080, 800x480 Pixel (1.4 KB, txt) - 26/09/2013
EDT ET035080, 320x240 Pixel (1.1 KB, txt) - 18/09/2014
EDT ET035080, 320x240 Pixel (1.1 KB, txt) - 08/09/2014
EDT ET050080, 800x480 Pixel (1.1 KB, txt) - 14/05/2014
EDT ET070080DH6, 800x480 Pixel (1.1 KB, txt) - 26/06/2014
EDT ETM070080, 800x480 Pixel (1.1 KB, txt) - 22/05/2014
EDT ETM070080, 800x480 Pixel (1.1 KB, txt) - 09/05/2014

Endrich

Endrich J035QVTC0301, 320x240 Pixel (1.4 KB, txt) - 04/02/2014
Endrich J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 27/05/2014
Endrich J070WVTC0601, 800x480 Pixel (1.5 KB, txt) - 04/09/2014
Endrich J050WVTC0201, 800x480 Pixel (1.4 KB, txt) - 27/05/2014

Evervision

Evervision VGG804809, 800x480 Pixel (1.1 KB, txt) - 05/12/2013

Hitachi

Hitachi TX17D01VM2CPA-1, 640x480 Pixel (758 bytes, txt) - 07/07/2014

InnoLux

InnoLux G057VGE, 640x480 Pixel (752 bytes, txt) - 04/07/2014

KOE TX14D14VM1BPB, 640x480 Pixel (756 bytes, txt) - 28/05/2014

Kyocera

Kyocera TCG057VG, 640x480 Pixel (1.1 KB, txt) - 07/04/2014

Variants

	aStoneA5-V2-W13 NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013, MQX SKU: aStoneA5-V2-W13	Request
	aStoneA5-V2-LIN NXP Vybrid Cortex-A5 + Cortex-M4, 256MB RAM, 128MB Flash, 2x Ethernet, 2x CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot, MQX SKU: aStoneA5-V2-LIN	Request
	aStoneA5-V1-W13 NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 2013 SKU: aStoneA5-V1-W13	Request
	aStoneA5-V1-LIN NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Linux Buildroot SKU: aStoneA5-V1-LIN	Request
	aStoneA5-V1-WEC7 NXP Vybrid Cortex-A5, 256MB RAM, 128MB Flash, Ethernet, CAN, Audio, Touch, RGB, LVDS, 0°C - +70°C, 5V Supply, Windows Embedded Compact 7 SKU: aStoneA5-V1-WEC7	Request

Starterkit

	Starterkit armStone™A5 Windows armStoneA5-V2-W13, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-W13	179,- €
	Starterkit armStone™A5 Linux armStoneA5-V2-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software SKU: aStoneA5-SKIT-LIN	179,- €

Link to the Forum

You will always find support in our Forum.

Recent Contributions

24 Mar, 13:17	WEC 2013 Firewall FWS0: How to make service start automatically
24 Mar, 11:24	Touch
18 Mar, 14:57	Phy link never came up / pcie failed with error -110
18 Mar, 09:04	How far along is Linux v6.6.x for PicoCores?
18 Mar, 08:32	Unable to build u-boot for PicoCore™MX8MM
11 Mar, 11:43	EDMA SAI1 error
10 Mar, 09:50	UBIFS "Corrupt empty space": Handling of 0-bits in empty NAND pages
27 Feb, 08:12	Fedora 36 - Buildroot fsimx6-B2024.04 - steps to enable or install USB Video Class (UVC) drivers for USB camera
21 Feb, 12:19	How to Enable Unified Write Filter (UWF)
13 Feb, 09:10	fw_printenv does not work reliable

Starterkit armStone™A5 Linux

Support

Anschrift