phonenumber +49(0)711 123722-0
shopping cart (0)
Login
|
DE EN

Starterkit armStone™A9/r3 Linux

 

Starterkit armStone™A9/r3 Linux
  299,- €
Tax not included

armStoneA9/r3-V1-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software

The armStone™A9/r3 in PicoITX format has standard connectors for 10/ 100/ 1000 Ethernet, 2x USB Host, USB Device, as well as Audio Line Out, DVI, SATA, and on the bottom side mPCIe. A power plug was assembled to supply the board with 5V. The two LVDS display channels are once on a 25pol socket and once both on a JILI30 connector (for dual channel LVDS). The alternative RGB display interface is on a 34-pole ESCDI interface. The resistive touch or capacitive touch controller (I²C) is connected via another 6-pole socket or the ESCDI display adapter. A USB Host interface is located on a 4-pole pin strip. Further interfaces are found on J1, and a 10-pole pin strip was already equipped for COM1.

The armStone™A9/r3 starter kit consists of the armStoneA9/r3-V1-LIN (with 1GB RAM, 128MB Flash, Audio, Ethernet, CAN, PCIe, SATA, and a resistive touch controller on the display adapter). Furthermore, we have equipped the RGB interface (34-pole ESCDI), as well as both LVDS interfaces.

One can connect an RGB display and two LVDS displays simultaneously. A bootloader and a Linux Image are already pre-installed.

The scope of delivery of the starter kit contains an additional cable set, a 7" WVGA TFT with a resistive touch panel, and the fitting display adapter with film cable. On a supplement, you can find the access data to documentation and software.
The starter kit also comes with a finned heat sink on the CPU, please note that these finned heat sinks are not contained in volume deliveries.

Additionally, we offer a 4-hour Workshop. The goal of the workshop is, to learn how to handle the armStone™A9/r3 starter kit and complete it with a running system. Under Linux, you learn how to deal with Buildroot and further Linux tools.

Scope of Delivery

armStoneA9 TOP
aStoneA9/r3-V1-LIN
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V1-LIN

armStone efus RGB Kit
Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT

starterkit cable kit
Cable Kit

SKU: SINTF-CABKIT

ADP NT24V2 OBLIQUE TOP
Power Adapter
To supply armStone™ and PicoCore™ modules with 24V.
SKU: ADP-NT24V3

Software 

software accessory Software .NET Drivers
Driver package for retrofitting, consists of C# drivers for I²C/ SPI/ CAN, as well as the SPI driver in C++.
SKU: WCE-DOTNET		 500,- €
 
software accessory UpDate Software
This program package allows a safe and easy update of the application program and the operating system via USB Stick or SD Card.
SKU: WCE-UPDATE		 500,- €
 
software accessory Boot Screen
Shows the device's user a starting procedure while booting (BMP File).
SKU: WCE-BOOTSCREEN		 500,- €
 
software accessory Custom Kernel
Creation of a customer-specific kernel. Windows CE components are set as the customer requests, as well as the registry entries (e.g. display). Customer-supplied software can also be added.
SKU: WCE-CUSTIMAGE		 500,- €
 
software accessory Failsafe Flash Filesystem (F3S)
The Failsafe Flash Filesystem F3S offers transaction safety on file level and therefore guarantees the consistency of the data, even in case of a blackout or other interferences while writing.
SKU: WCE-F3S		 1,000,- €
 
software accessory Secure Boot as a Service
The SBS (Secure Boot as a Service) includes the signing (protection against manipulation) and if necessary encryption (protection of intellectual property) by F&S Elektronik Systeme.
SKU: Linux-SBS		 500,- €
 
software accessory Display Customization (RGB or LVDS display under Linux)
Creation of a DeviceTree (Buildroot or Yocto) for your F&S Board.
The DeviceTree contains the appropriate entries for your display.
SKU: EW-SW		 700,- €
 
software accessory Display Customization (MIPI-DSI Display under Linux)
Creation of a DeviceTree / kernel (Buildroot or Yocto) for your F&S Board.
The DeviceTree / kernel contains the appropriate entries for your MIPI-DSI display.

SKU: EW-SW-MIPI-DSI-Linux		 1,000,- €
 
software accessory Display Customization (RGB orLVDS Display under Windows)
Creation of a driver for the touch controller under WCE7 or WEC13 for your F&S board.

SKU: EW-SW-RGB-LVDS-Windows		 500,- €
 

Displays and Display Kits

ET070080 B.LCD.15 Display 7" RGB Display with resistive Touch
7" TFT (800x480) EDT ET070080DH6
SKU: B.LCD.15		 120,- €
 
B.LCD.18 7" RGB Display with PCAP Touch
7" TFT (800x480) Display Endrich MI0700AJT-54CP with capacitive Touch
SKU: B.LCD.18		 150,- €
 
KIT TFT 7RGB Displaykit 7" RGB - PCAP Touch
7" Display with RGB interface and capacitive touch panel, connection cable (50pol film cable) and display adapter.
SKU: KIT-TFT-7RGB		 210,- €
 
armStone efus RGB Kit Displaykit RGB 2
7" WVGA Display with RGB interface and touch panel, connection cable (40pol film cable), display adapter and touch cable
SKU: aSt-RGBKIT		 170,- €
 

Touch Kits

resistive Touch Kit armStoneA9 Resistive Touch Kit 2
For the connection of a resistive touch panel to boards with 6pol Hirose socket.
SKU: SINTF-ADP-RTI2C		 Request  
SINTF ADP EDTTOUCH2 PCAP Touch Kit for EDT
Kit to connect an EDT PCAP touch panel
SKU: ADP-EDTTOUCH2		 35,- €
 

Cables

B.MKAB.23 50poles Film Cable
Cable for 7" RGB Endrich Display (B.LCD.18)
FFC cable, A50pol., pitch=0,5mm, l=200mm
SKU: B.MKAB.41		 10,- €
 
B.MKAB53 LVDS Cable
LVDS cable with JAE FI X30 on one side and open ends on the other side
SKU: B.MKAB.53		 22,- €
 

Adapters

I2C Extension I2C Erweiterung
Circuit for an external extension with GPIOs, AID, PWM and matrix keyboard. This external circuit is connected via I²C Bus.
SKU: NDCU-ADP/I2C		 80,- €
 
aStone ADP UNI1 OBLIQUE TOP NEU armStone™ Extension
Routes interfaces of the 66pin feature connector to standard connectors.
SKU: aStone-ADP-UNI1		 130,- €
 
armStone efus EDT Adapter Display Adapter Board to EDT Unified Series
Helps to connect a 7" WVGA display by EDT (ET070080DH6/B.LCD.15) with RGB interface and resistive touch panel
SKU: aSt-ADP-EDT1		 50,- €
 
armStone Adapter DVI armStone™/ efus™/ PicoCore™ DVI Adapter
Connects armStone™, efus™ or PicoCore™ to a DVI/ HDMI screen.
SKU: aStone-ADP-DVI		 50,- €
 
aSt-ADP-MIT1 Adapter for Endrich iSi50 Displays
Adapter to connect Endrich iSi50 displays to F&S boards
SKU: aSt-ADP-MIT1		 50,- €
 
JTAG Debug Adapter JTAG Debug Adapter
To program Cortex-M4.
SKU: ADP-CMSIS		 69,- €
 
ADP mPCIe WLAN OBLIQUE mPCIe Module with WLAN/BT
mPCIe-Full-Mini Type F1 or mPCIe-Half-Mini Type H1 module with WLAN 2.4/ 5 GHz und BT5.0 LE

SKU: ADP-mPCIe-WLAN		 40,- €
 

Workshops

linux windows embedded compact workshop Workshops
Workshops for F&S Boards with Windows Embedded Compact or Linux - Beginner Workshops - Qt 5 - Asymmetric Multiprocessing - Secure Boot
SKU: NDCU-WS1		 Request  
linux windows embedded compact workshop Secure Boot as a Package
Secure Boot as a Package contains a workshop, where you learn how to realize the topic Secure Boot. You will also receive a user Tool Software.
SKU: WS-SBP		 500,- €
 

Other Accessories

USBSTICK1 USB Stick
USB Memory Stick with common memory size (2GB+) and imprinted F&S logo. The USB Stick was tested on all current F&S boards.
SKU: USBSTICK.1		 20,- €
 

Variants

armStoneA9 TOP aStoneA9/r3-V1-LIN
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V1-LIN		 Request  
armStoneA9 TOP aStoneA9/r3-V1-WEC7
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Windows Embedded Compact 7
SKU: aStoneA9/r3-V1-WEC7		 Request  
armStoneA9 TOP aStoneA9/r3-V1-W13
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Windows Embedded Compact 2013
SKU: aStoneA9/r3-V1-W13		 Request  
armStoneA9 TOP aStoneA9/r3-V2I-W13/WEC7
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, DVI, -20°C - +85°C, 5V Supply, Windows Embedded Compact 2013 or 7
SKU: aStoneA9/r3-V2I-W13/WEC7		 Request  
armStoneA9 TOP aStoneA9/r3-V2I-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, DVI, -20°C - +85°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V2I-LIN		 Request  
armStoneA9 TOP aStoneA9/r3-V3I-W13
NXP i.MX 6DualLite Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, -20°C - +85°C,5V Supply, Windows Embedded Compact 2013
SKU: aStoneA9/r3-V3I-W13		 Request  
armStoneA9 TOP aStoneA9/r3-V3I-LIN
NXP i.MX 6DualLite Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, -20°C - +85°C ,5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V3I-LIN		 Request  

Starterkits

armStoneA9 TOP Starterkit armStone™A9/r3 Linux
armStoneA9/r3-V1-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software
SKU: aStoneA9-SKIT-LIN		 299,- €
 
armStoneA9 TOP Starterkit armStone™A9/r3 Windows
armStoneA9/r3-V1-WEC7, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software
SKU: aStoneA9-SKIT-WCE		 299,- €
 

Buildroot and Yocto

The Linux BSP "fsimx6-B2020.04" is based on Buildroot, a software for creating root file systems. About 1400 different software packages can be added to the root file system using menu control. The range of functions ranges from simple libraries and utilities to a complete Java environment to complete graphical environments such as Qt, Wayland/Weston or X11, including applications such as an HTML5-capable web browser. In this way, it is very easy to put together a customized Linux system.

As an alternative to Buildroot, there is also a Yocto-based environment. We offer the Linux BSP fsimx6-Y2020.03, which is based on Yocto.

Our standard configuration, which should give a first impression of the functional scope of the module, contains the following features: Busybox, gdb, alsa-utils, gstreamer, fbv, X11R7, matchbox, feh, openssl, openssh, ncurses, can-utils, iproute2, ftpd, httpd, telnet, tftp, and much more

Both BSPs include the source code packages from U-Boot (2018.03), Linux kernel (based on 4.9.88) and Buildroot (2019.05.01) or Yocto (2.4) adapted by F&S. In addition, our cross toolchain is included, some sample applications and all binaries in the standard configuration. And last but not least, detailed documents on the hardware are included as well as the first steps documentation for easy entry.

F&S also offers a virtual machine (based on VirtualBox) with an installed Linux based on the Fedora 27 distribution for free download. All packages necessary to translate our software are already installed. All services (NFS, TFTP) for working with our boards are also installed. Our BSP is unpacked and precompiled in the right directories. With this virtual machine it doesn't matter whether you use Windows or Linux as the host. Simply download the VHD, import it into VirtualBox and development can begin immediately.

➜ More information about the new Buildroot Release B2020.04
➜ More information about the new YOCTO release Y2020.03

armStoneA9/r3 - Product Flyer


armStoneA9/r3 - Hardware


armStoneA9/r3 - Linux


armStoneA9/r3 - Windows Embedded CE/Compact


Sorry, there are no files to show.


armStoneA9/r3 - Display

Variants

armStoneA9 TOP aStoneA9/r3-V1-LIN
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V1-LIN		 Request  
armStoneA9 TOP aStoneA9/r3-V1-WEC7
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Windows Embedded Compact 7
SKU: aStoneA9/r3-V1-WEC7		 Request  
armStoneA9 TOP aStoneA9/r3-V1-W13
NXP i.MX 6Quad Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, SATA, Touch, RGB, LVDS, DVI, 0°C-+70°C, 5V Supply, Windows Embedded Compact 2013
SKU: aStoneA9/r3-V1-W13		 Request  
armStoneA9 TOP aStoneA9/r3-V2I-W13/WEC7
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, DVI, -20°C - +85°C, 5V Supply, Windows Embedded Compact 2013 or 7
SKU: aStoneA9/r3-V2I-W13/WEC7		 Request  
armStoneA9 TOP aStoneA9/r3-V2I-LIN
NXP i.MX 6Solo Cortex-A9, 512MB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, DVI, -20°C - +85°C, 5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V2I-LIN		 Request  
armStoneA9 TOP aStoneA9/r3-V3I-W13
NXP i.MX 6DualLite Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, -20°C - +85°C,5V Supply, Windows Embedded Compact 2013
SKU: aStoneA9/r3-V3I-W13		 Request  
armStoneA9 TOP aStoneA9/r3-V3I-LIN
NXP i.MX 6DualLite Cortex-A9, 1GB RAM, 256MB Flash, Gb Ethernet, CAN, Audio, PCIe, Touch, RGB, LVDS, -20°C - +85°C ,5V Supply, Linux Buildroot/Yocto
SKU: aStoneA9/r3-V3I-LIN		 Request  

Starterkits

armStoneA9 TOP Starterkit armStone™A9/r3 Linux
armStoneA9/r3-V1-LIN, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software
SKU: aStoneA9-SKIT-LIN		 299,- €
 
armStoneA9 TOP Starterkit armStone™A9/r3 Windows
armStoneA9/r3-V1-WEC7, cable kit, 7“ EDT RGB TFT with resistive touch incl. adapter and cables, power adapter, access data to documentation and software
SKU: aStoneA9-SKIT-WCE		 299,- €
 

Support

Telefon: +49 711 123722 0

Info: info@fs-net.de
Verkauf: sales@fs-net.de
Kunden-Support: support@fs-net.de
Webmaster: webmaster@fs-net.de

LinkedIn icon youtube icon twitter icon maps icon email icon

Anschrift

F&S Elektronik Systeme GmbH
Untere Waldplätze 23
70569 Stuttgart - Germany

Contact us

Datenschutzerklärung |  Disclaimer |  Impressum |  AGB |  Bestellhinweise